Question about 1995 Buick Century
Posted by Anonymous on
You can do it without removing the exhaust crossover. You'll need to either buy a half moon 13mm wrench, or fab up your own wrench.
Posted on Apr 01, 2015
Take the top rad hose off the top of the engine and the thermostat housing should be the part you take the hose off of. There probably is two or three bolts that hold this housing on. Carefully take it off and the thermostat should be inside this housing going inside the top of motor. Replace with new one making sure you put a new gasket in place as well and replace housing but do not over tighten the bolts as they sometimes break off then you are in trouble Make sure you install the thermostat the right side up I did get one up side down once and they don't work that way.
Wishing you good luck.
Posted on Apr 01, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
patience , and a 13 MM wrench , you gotta get your arms in there deep , that lower bolt does not need to come all the way off , the thermostat housing has a slot at the bottom for easier access , loosen it about 3.4 of the way and you can get the housing out , experience says a premium thermostat will give you grief trying to reinstall , get a regular duty thermostat .reverse procedure.
Posted on Jan 02, 2009
The coolant level sensor is located on the radiator. If you are looking at the engine from the front of the car it will be on the left side. There will some kind of clip holding it in the radiator. Removed the clip and pull the sensor out. You will lose coolant so try to swap it out quick or drain some of the coolant out. Once new sensor is installed, install clip to keep the sensor in place and reconnect the wires to the sensor. Crank the engine and make sure the coolant level is full. This should correct your problem.
Posted on Jan 04, 2009
Here's a link with pictures etc, you just have to scroll down page to 3.1L engine. Click on pictures to expand if necessary.
Posted on Jan 30, 2009
Tips for a great answer:
Jan 13, 2017 | 1995 Buick Century
Feb 18, 2015 | 2003 Buick Century
Jul 16, 2011 | 2002 Buick Century
Dec 11, 2010 | 1995 Buick Century
Sep 02, 2010 | 1995 Buick Century
Jan 04, 2010 | 1995 Buick Century
Nov 03, 2009 | 1995 Buick Century
Oct 18, 2009 | 1995 Buick Century
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: