Question about 2006 Buick LaCrosse

Open Question

How do you reattach the rearview mirror to the base? My son pulled it off.

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 55 Answers

SOURCE: The inside rearview mirror fell off my 1999 Buick

should be a tiny allen screw holding it in..

Posted on Jul 09, 2010

  • 611 Answers

SOURCE: I have a 2000 buick

should just be a torx 15 also t15 screw driver to unscrew it and u must use the rearview mirror adhesive sold at most parts stores

Posted on Jun 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reattach rearview mirror


Go to any auto parts store that carries Loctite brand mirror foot attachment glue kits, follow instructions to the letter, if not it will fall off right away.

Aug 31, 2014 | 2002 Pontiac Grand Prix

1 Answer

Rearview mirror fell off ...,metal disk still on windshield, how to reattach?


Go to the auto parts store. They sell a special kit to reattach your mirror. It is simple to do. You MUST follow the package instructions.

Thanks for your interest in FixYa.com

Sep 29, 2011 | 2005 Isuzu Ascender

1 Answer

I have a 2000 buick regal. the rearview mirror fell down. How do i get the metal piece out to reattach to the windshield?


should just be a torx 15 also t15 screw driver to unscrew it and u must use the rearview mirror adhesive sold at most parts stores

Jun 12, 2011 | 2000 Buick Regal

1 Answer

Cracked mirror only, mounting and other parts are functioning well. Can I purchase a mirror only and if so, where?? This is for 2006 Pontiac Grand Prix and the passenger side mirror is cracked but works...


Hello, yes the glass can be replaced. you will need to see your local GM dealer for the glass. real simple to replace.





  • Carefully push the outside rearview mirror face on the inner edge, near the front door window glass, to allow access.
  • Insert a large flat-bladed screwdriver in the slot between mirror lens and the mounting base.
  • Grasp the mirror face firmly and pull it from the mirror body.
  • Remove the outside rearview mirror case from the outside rearview mirror housing and disconnect the heater wire, if equipped.






  • Using the palm of your gloved hand, press firmly on the center of the glass until the case seats onto the motor.
  • The mirror will make a snapping noise when properly seated.
  • Inspect the mirror for proper operation.


  • cf49034.gif

    f845709.gif

    Jul 03, 2010 | 2006 Pontiac Grand Prix

    1 Answer

    Seperate rearview mirror from plate both came off


    f

    Replacing the rear view mirror on a Ford Explorer is easy. The only obstacle you might encounter is fear of breaking the glued metal plate off the windshield. Do not sweat it. You can buy glues at the auto parts store to reattach the mirror to the windshield (Difficulty: Moderately Easy).

    Instructions:
    1. Tap gently at the base of the mirror where it slides on over the metal plate glued to the windshield and pull upward. Some rear view mirrors have a small Allen screw that tightens the base of the rear view mirror to the metal plate. Disconnect the electrical plugs if your rear view mirror has them.
    2. Pull the rear view mirror clear of the metal plate. Clean around the metal plate glued to the windshield. If the metal plate has come off because of harsh weather or from hammering too hard at it, reattach it with glue designed for this job.
    3. Clean the area where you will be attaching the metal plate on the windshield. Apply the glue evenly on the surface of the metal plate that will go against the window. Be sure to clean and scrape off all the old glue before applying the new glue. Gently push the metal plate against the windshield in the spot you wanted it and hold tight for five minutes.
    4. Wait a day before putting the base of the mirror or replacement rear view mirror onto the metal plate. Do not force the base over the plate. Forcing it will likely dislodge it again. Press firmly until it will not slide along the grooves of the metal plate. Reconnect your electrical plugs and tighten the Allen screw if your new mirror has one. Adjust the mirror according to your safe viewing preference

    Hope help with this (remember rated this help). Good luck.

    Mar 12, 2010 | 1999 Ford Explorer

    2 Answers

    How do you reattach the rearview mirror on a 2001 tacoma Thanks


    get a rearview mirror glue kit and follow the instructions.

    Aug 02, 2009 | 2001 Toyota Tacoma

    1 Answer

    Rearview mirror fell off windshield while car was parked unused for a week


    You can buy a special bonding adhesive at a parts store to fix this. Usually there is a piece that the mirror attaches to, which is glued to the windshield. You will need to follow the instructions on the bonding adhesive, which will include cleaning the area where you will attach the mirror, and usually you separate the base mount from the mirror, glue it, hold in place with pressure for about 1 minute, reattach mirror, and you will be good to go.

    Jul 30, 2009 | 2004 Subaru Forester

    1 Answer

    Can not find the set screw for this inside rearview mirror to rea


    There is a little opening at the bottom of the mirror mounting part; gently push a small, flat screwdriver into it and slide the mirror off.

    Jul 01, 2009 | 2000 Toyota Avalon

    1 Answer

    1999 gmc jimmy rearview mirror diagram needed


    It should just slide out. You might have to use a little bit of force

    Jun 11, 2009 | 1998 GMC Jimmy

    1 Answer

    Custom Rear view mirror


    Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
    About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**

    However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.

    The best solution is to leave the original factory-installed rearview mirror in place.

    May 16, 2008 | 2006 Chevrolet Equinox

    Not finding what you are looking for?
    2006 Buick LaCrosse Logo

    Related Topics:

    24 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Buick Experts

    yadayada
    yadayada

    Level 3 Expert

    75807 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22133 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8172 Answers

    Are you a Buick Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...