Question about Cars & Trucks

Open Question

Where in wiring harness will the camshaft sensor plug come from on vauxhall vivaro 2.0 cdti p0340 code

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 403 Answers

SOURCE: p0340 vauxhall vivaro

not always cam sensor could be crank sensor if it cranks long and starts it can be crank sensor if it starts right away the cam sensor can cause a missfire as well if you have a pressure switch for oil level it to can cause no start check the oil level if its full it can cause a no start if this model is equipped

Posted on May 06, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After serviceing injector pump for opel vivaro CDTI 1.9 2003


NO START OPEL VIVARO FIX - YouTube

? 3:39
www.youtube.com/watch?v=i_G7Al9IFuU
Jan 21, 2014 - Uploaded by anto denn
All it does is crank but as soon as you fiddle with the injector ...Help have a 2003 trafic drove fine then one day i drove 100 yards and it just ... is the fuel pump turning on when you turn the key ?... Vauxhall Vivaro 2 0 CDTI Turbotune tuning box fitting guide - Duration: 6:40. by Darren Darling 28,094 views.

Sep 28, 2015 | Opel Cars & Trucks

2 Answers

Code p0340


P0340 Hyundai - Camshaft Position Sensor 'A' Circuit Malfunction Bank 1 Or Single Sensor Possible causes
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery

Read more: http://engine-codes.com/p0340_hyundai.html#ixzz338zFujgZ

May 29, 2014 | 2001 Hyundai Santa Fe

1 Answer

Carnt find the wire with plug to attach to the camshaft sensor on vauxhall vivaro 2.0 cdti


we have pack rats here, and they eat wires to deep in harness.
got rats?
my bud here, RV they eat the air bags 2 times, as $3000 each time.
they cut is comprehensive after 2nd. (ins. goons)

how did the CMP get unplugged,we wait with baited breath>>.......

May 06, 2014 | Cars & Trucks

1 Answer

P0340 vauxhall vivaro


not always cam sensor could be crank sensor if it cranks long and starts it can be crank sensor if it starts right away the cam sensor can cause a missfire as well if you have a pressure switch for oil level it to can cause no start check the oil level if its full it can cause a no start if this model is equipped

May 05, 2014 | Vauxhall Vectra Cars & Trucks

1 Answer

Vauxhall vivaro 2.0 cdti camsahft sensor p0340 fault


top right hand side cam sprocket cover this pic may help

May 05, 2014 | Vauxhall Viscount Cars & Trucks

1 Answer

Where is the wiring with the conection plug for the cam shaft position sensor on vauxhall vivaro 2.0 cdti?


i would say this sensor connector must have got tucked away somewhere after having work done on engine

May 05, 2014 | 2002 Volkswagen Eurovan

1 Answer

P0340 99 jeep cherokee code


P0340 JEEP - Camshaft Position Sensor Circuit engine cylinder Bank 1 Sensor 1

Possible causes- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery

Sometimes and in some models, low battery voltage or a weak starter can can trigger a Camshaft Position Sensor code.

Read more: http://engine-codes.com/p0340_jeep.html#ixzz25iQflrEb

Sep 06, 2012 | 1999 Jeep Grand Cherokee

3 Answers

What does p0340(pd) code mean


P0340 is

Camshaft Position Sensor Circuit Malfunction
What does that mean?

This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.
FB.init("dd7d9e9681341cde77587bc6a2029f6f"); OBD-Codes.com on Facebook Symptoms

Symptoms can include:

  • Hard starting or no start
  • Rough running / misfiring
  • Loss of engine power
Causes

A code P0340 could mean one or more of the following has happened:

  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
Possible Solutions

With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:

  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

Mar 20, 2011 | 1999 Cadillac Seville

2 Answers

Can u tell me what the problem of this code PO340


I have a 1999 BMW 740 il My SES light came on so I hooked up my OBD code reader p0340 - Camshaft Position Sensor Circuit Malfunction is what came up. so I went to the BMW parts department and bought the Camshaft Position Sensor.
I Replaced the with the new. My SES light was still on so I hooked up the OBD reader again hoping it may reset my SES light but it didn't what did happen is the OBD reader came up with the same code (p0340 - Camshaft Position Sensor Circuit Malfunction) witch is what I just replaced. now I'm at a loss. I'm not sure how to reset my SES light and if I just replaced the Camshaft Position Sensor why dose it the OBD code p0340 still come up. Any suggestions?

Mar 18, 2011 | 1996 Nissan Altima

1 Answer

RICH


DTC (diagnostic trouble code) P0340 is indicating a fault has occured in the camshaft position sensor system of the cars' electronic engine control system. DTC P0717 is for a transmission input turbine shaft speed. Typically these codes are unrelated. Both the sensors are variable reluctance devices. They have no moving parts and as such are robust and not usually prone to failure. But they can and do fail. Are either codes "hard" faults or are they in the continous memory of the computer? Does the P0340 clear itself when the engine is shut off and restarted? Can you cause the P0340 to reoccure just by starting the engine and with out driving it and revving the engine to 1500 to 2000 rpm for 1 to 2 minutes while in Park? The P0717, when cleared should only reoccure when the car is driven. If the camshaft position sensor has been replaced and still the same code occures make sure you have the correct information as to the meaning of this code in regards to your particular model year and engine. Does the engine have a camshaft position sensor for each camshaft? If so what is the DTC code for the other camshaft position sensor. Yes, the engine's computer (ICM, PCM, ECM, all terms for same thing) could be faulty but in most cases this is not the problem. Does the transmission seem to shift properly? You probably won't notice a differnece in the way the engine runs if the camshaft position fails due to the default stratagy used in the ICM. Wiring would be my next area of concern. Does the wiring for the camshaft position sensor and the transmission sensor go through the same wiring harness and could you have a poor connection at some point in that harness? Inspect the wiring and the hardshell connectors throughout the harness. Let me know what you find out. Thanks

Sep 28, 2008 | 1994 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...