Question about 1992 Geo Tracker

1 Answer

Injector not fireing

Tets injector out of tbi, in tbi no pulse

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Geo Master
  • 20,706 Answers

You have a TBI 8valve engine. just like my 91
the injector , not firing, so by guy method.
1: it dont click? (sonic ,stethoscope)
2: the noid dont flash. (use a noid lamp and win)
3: it dont squirte, watching it with eyes, cranking,

if the noid fails, that means ECU is bad or one of 3 inputs to ECU are dead.
if noid works, that means, the injector is cogged, it has 10 micron screens that are easy to clean. or there is no 35 PSI fuel pressure.

here is the page just for that.

  1. THE ECU IS PROGRAMMED to cut fuel if there is no spark preventing TV like crashes and burns. (and other fire reasons)
  2. the tests are all easy. no order but #1 is #1
  3. fuel pressure at spec.
  4. injector coil reads 1.0 OHMS.
  5. injector clean. (there is only one, so all hope is just here)
  6. noid lamp fails , so is CMP dead? or TPS TP pin stuck high or , ecu throwing code 41./42s errors, BINGO!

http://www.fixkick.com/INJECTORS/injectors.html

or no starts

http://www.fixkick.com/INJECTORS/injectors.html

Posted on Aug 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 camaro 5.0 tbi injector pulse intermitant


What have you checked? I would start with a noid light to see when the two injectors wiring is pulsing. if intermittent then i would check the pickup coil located inside the distributor. It controls timing for the injectors and for the timing advance.

Oct 18, 2014 | 1989 Chevrolet Camaro

1 Answer

Diagram v6 engine


you have to understand injectors pulse come like this
pcm have to know if engine rpm running over 400rpm
key is on
injectors have a + positive and a ground that is given by pcm

Oct 08, 2013 | Chevrolet C1500 Cars & Trucks

1 Answer

1989 caprice with 350 tbi injectors won't pulse anymore


If you have spark, the computer is getting the signal to pulse the injectors.
If you have power but no ground pulse, you may have fried the driver in the computer again.
You could get a used computer from a junk yard to test it.
There could be a short in one of the injectors or the harness at the computer, or a break in the circuit from the computer, and that could kill the driver in the computer.

Jan 18, 2013 | Cars & Trucks

2 Answers

1989 K1500 was running fine and just quit. Not getting gas but I can hear the fuel pump start when I turn the key on. took fuel line off of TBI and seem to have plenty of gas flow but nothing comes out of...


you need to have the fuel pressure checked with a gage and volume as if its not at the spec the injectors won`t open to spray enough fuel.also you should check the injectors for proper voltages and ground as if these are not within specs then the injectors won`t work either

Oct 17, 2011 | 1989 Chevrolet K1500

1 Answer

350 with TBI intermittent injector pulsing


this could be a bad ingnition module or a loose wire. but i think on this truck the injectors do get singnal from the ecm

Jan 06, 2010 | 1987 GMC Suburban

1 Answer

No power to injectors 350 tbi


Check the crank sensor for failure. It is relatively easy to change and it is what tells the computer that the engine is turning over. If there isd no crank signal the computer wont fire the injectors.

Aug 15, 2009 | 1990 Chevrolet C1500

2 Answers

Need help with this 93 astro van


Have you checked for injector pulse with a noid light at the injector connector? You could have a bad ecm.

Aug 12, 2009 | 1993 Chevrolet Astro

1 Answer

1993 s10 2.8 tbi the fuel pump fails to pressurize when the key is tunred on, and i have to fuel injector pulse. when a jumper wire is attached i can pressurize the pump but i still have no injector pulse.


There needs to be 60 PSI of fuel pressure in the system to have the fuel injectors to work. There is also a fuel pump relay on the fire wall just left to the brake booster, There is two relays there, i just can not remember which relay is which but try switching the relays with one another. Also check the fuses to the fuel pump and ECM, and the fuel pressure from the shredder valve. Good luck and keep me posted, not a bad Idea to also replace the fuel filter, and that is located at the inside frame rail under the drivers side.

Jun 03, 2009 | 1991 Chevrolet S-10

Not finding what you are looking for?
1992 Geo Tracker Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7689 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...