Question about 2002 Jaguar X-Type

Open Question

Where is ignition coil b primary/secondary circuit on 05 jaguar x-type w/3.0l

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

creg_912
  • 196 Answers

SOURCE: P0354 Ignition Coil D Primary/Secondary

this code is saying you have a failing ignition coil..You will have to swap them and determine which one is failing...here is the procedure.. DTC P0354; RANDOM MISFIRE DETECTED, MISFIRE DETECTED, (CYLINDERS 1-8) IGNITION COIL PRIMARY CIRCUIT MALFUNCTION, (CYLINDERS 1-8)

G290076t1 : CHECK COIL FUNCTION BY SUBSTITUTION

  1. Swap the suspect coil for a known good unit.
  2. CLEAR the DTC. TEST the system for normal operation.
- Does the same DTC reoccur? The DTC will indicate if the same cylinder is misfiring. -> Yes
INSTALL a new coil. CLEAR the DTC. TEST the system for normal operation.

-> No

G290076t2 : CHECK THE IGNITION COIL SUPPLY VOLTAGE CIRCUIT
  1. Disconnect the relevant ignition coil electrical connector(s), (PI02 to PI09).
  2. Turn the ignition switch to the ON position.
  3. Make sure the ignition relay is energised.
  4. Measure the voltage between:
- Is the resistance greater than 5 ohms? -> Yes
REPAIR the high resistance circuit. CLEAR the DTCs. TEST the system for normal operation.

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0351 code loss of power 2.3L08ford ranger,it warms slow and really need to eliminate1~voltage regulator is where?) & 2~ ground through PCM) 3~knowing limits&threashholds{sensorsIGNcircuit}?Ty 0$


P0351 loss of power ? That's not what this code is about . P0351 - Ignition Coil A Primary/Secondary Circuit ,you have a bad coil and possibly a bad coil driver inside the PCM . Do yourself a favor an take your vehicle to a qualified repair shop !
P0351 - Ignition Coil A Primary/Secondary Circuit Description: See the description for DTC P0350. Possible Causes: See the possible causes for DTC P0350. Diagnostic Aids: See the diagnostic aids for DTC P0350. Application Key On Engine Off Key On Engine Running Continuous Memory Coil-on-plug (COP) ignition testing - GO to Pinpoint Test JF . GO to Pinpoint Test JF . Coil pack ignition testing - GO to Pinpoint Test JE . GO to Pinpoint Test JE .
P0350 - Ignition Coil Primary/Secondary Circuit Description: Each ignition primary circuit is continuously monitored. The test fails when the powertrain control module (PCM) does not receive a valid ignition diagnostic monitor (IDM) pulse signal from the ignition module (integrated in the PCM). Possible Causes:
  • Open or short in the ignition START/RUN circuit
  • Open coil driver circuit
  • Coil driver circuit short to ground
  • Damaged coil
  • Coil driver circuit short to VPWR
Diagnostic Aids: Use the 12-volt non-powered test lamp to verify START/RUN voltage at the ignition coil harness connector.
Check the coil driver circuit for open, short to VPWR, or short to ground. Application Key On Engine Off Key On Engine Running Continuous Memory All GO to Pinpoint Test JE .

Feb 18, 2017 | 2008 Ford Ranger

1 Answer

00 dodge dakota 4.7 codes p0353 and p0354 what that mean


code p 0353 refers to ignition coil C primary/secondary --circuit malfunction===causes ---wiring--ignition coil---ECM
code p 0354 refers to ignition coil D primary/secondary ---circuit malfunction===causes --wiring---ignition coil---ECM
check harness connections to the coils are clean and tight
replace the coils
check connections to the ECM

Nov 19, 2016 | Dodge Cars & Trucks

1 Answer

I have a PO350 code on my Hyundai xg350L. What does it mean and how do I fix it?


P0350 Hyundai - Ignition Coil Primary/Secondary Circuit pdf.gif share.png 2 0 [img alt="P0350 Hyundai Comments" src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/comments.png"> ' Add Comment - Faulty Ignition Coil Primary/Secondary
- Ignition Coil Primary/Secondary harness is open or shorted
- Ignition Coil Primary/Secondary circuit poor electrical connection
- Faulty Engine Control Module (ECM)
[img src="http://7ff587e0977842abc470-bfcce390d0a24108a1dce58e5acfca1f.r31.cf1.rackcdn.com/help.jpg" alt="What does this mean?" > What does this mean?
When is the code detected?
The test fails when the Engine Control Module (ECM) does not receive a valid pulse signal from the ignition coil.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Lack/Loss of Power
- Engine may be harder to start
- Engine hesitation
- Rough engine idle
P0350 Hyundai Description
The ignition signal from the Engine Control Module (ECM) is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.


Read more: http://engine-codes.com/p0350_hyundai.html#ixzz3JNf6yMdg

Nov 17, 2014 | Hyundai XG350 Cars & Trucks

1 Answer

What is obd code 0354 lincoln ls 05 v8?


code p0354 refers to ignition coil D primary /secondary--circuit malfunction===causes --wiring --ignition coil---ECM

replace the coil.

Aug 24, 2014 | Cars & Trucks

1 Answer

Coil packs not firing on 2000 s type 3.0 jaguar


The coils have battery voltage running through the primary windings, and grounded in the ignition control module. The engine computer signals the ignition module when to cut the primary current, thereby inducing high voltage in the coil's secondary windings and spark at the spark plug.
The computer processes all sensor information, but primarily from the crank position sensor, to determine spark timing.

Nov 17, 2013 | Jaguar Cars & Trucks

1 Answer

How to trouble shoot code p0360


P0360 - Ignition Coil '10' Primary/Secondary Circuit Malfunction

Ignition Coil Primary/Secondary harness is open or shorted
- Ignition Coil Primary/Secondary circuit poor electrical connection
- Faulty Ignition Coil Primary/Secondary
- Faulty Engine Control Module (ECM

Read more: http://engine-codes.com/p0360.html#ixzz21fHBlyUw

Jul 25, 2012 | Chevrolet Silverado 2500HD Cars & Trucks

1 Answer

P0354 Ignition Coil D Primary/Secondary Circuit Malfunction This is what the scantool came up with on my 2001 Jaguar s-type 3.0 Car has been idling funny but will get cruising on the highway.


this code is saying you have a failing ignition coil..You will have to swap them and determine which one is failing...here is the procedure.. DTC P0354; RANDOM MISFIRE DETECTED, MISFIRE DETECTED, (CYLINDERS 1-8) IGNITION COIL PRIMARY CIRCUIT MALFUNCTION, (CYLINDERS 1-8)

G290076t1 : CHECK COIL FUNCTION BY SUBSTITUTION
  1. Swap the suspect coil for a known good unit.
  2. CLEAR the DTC. TEST the system for normal operation.
- Does the same DTC reoccur? The DTC will indicate if the same cylinder is misfiring. -> Yes
INSTALL a new coil. CLEAR the DTC. TEST the system for normal operation.

-> No

G290076t2 : CHECK THE IGNITION COIL SUPPLY VOLTAGE CIRCUIT
  1. Disconnect the relevant ignition coil electrical connector(s), (PI02 to PI09).
  2. Turn the ignition switch to the ON position.
  3. Make sure the ignition relay is energised.
  4. Measure the voltage between:
- Is the resistance greater than 5 ohms? -> Yes
REPAIR the high resistance circuit. CLEAR the DTCs. TEST the system for normal operation.

Sep 19, 2011 | 2001 Jaguar S-Type

1 Answer

I have no spark in cylinders 2,4,6 on my 2002 Ford escape and three codes 354,355,356 Which means the same . After checkin those Three coils I found out , there is no negative Any advise?


P0354 - Ignition Coil D Primary/Secondary Circuit Malfunction.

Description of DTC:
The ignition signal from the Powertrain Control Module (PCM) or Electronic Control Module(ECM) is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.

Symptoms:
- Lack/Loss of Power
- The engine may be harder to start
- Engine hesitation
- Check Engine Light On
- No spark

Possible Causes:
- Open or short in the ignition coil circuit
- Ignition coil circuit shorted to ground
- Ignition coil connector
- Damaged ignition coil
- Damaged PCM or ECM

Possible Solutions:
- If damage, repair ignition coil circuit
- Replace ignition coil
- Replace PCM or ECM



P0355 - Ignition Coil E Primary/Secondary Circuit Malfunction.

P0356 - Ignition Coil F Primary/Secondary Circuit Malfunction.

Jan 18, 2011 | 2002 Ford Escape

1 Answer

Miss fires and stots off when I give it gas as codes 1391 ,0351, 0352, 0353,


P1391 - Not a valid obd code.
B1391 - Oil Level Switch Circuit Failure
C1391 - Not a valid obd code.
U1391 - Not a valid obd code.
Its possible you may have misread this code. If it is B1391 that would be the only code with 1391 for your vehicle.

P0351 - Ignition Coil A Primary / Secondary Circuit Malfunction. The ignition signal from the Powertrain Control Module or Electronic Control Module is sent to and amplified by the power transistor. The power transistor turns ON and OFF the ignition coil primary circuit. This ON/OFF operation induces the proper high voltage in the coil secondary circuit.

Possible Causes:
- Open or short in the ignition coil circuit
- Ignition coil circuit shorted to ground
- Ignition coil connector
- Damaged ignition coil
- Damaged PCM

P0352 - Ignition Coil B Primary / Secondary Circuit Malfunction.
Same repair info as P0351.

P0353 - Ignition Coil C Primary / Secondary Circuit Malfunction.
Same repair info as P0351



Solutions:
- If damage, repair ignition coil circuit
- Replaced ignition coil
- Replaced
PCM or ECM

Jan 16, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Hi have 05 lincoln LS has engine code P0354 but i change ignition coil cy4 to 5 but still same code what i have to do


P0354 Ignition Coil D Primary/Secondary Circuit

The wiring may be bad to the cylinder, but changing the coil position and getting same code means that the coil itself is not bad.

Aug 11, 2010 | 2000 Lincoln LS

Not finding what you are looking for?
2002 Jaguar X-Type Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

455 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...