Question about 1995 Dodge Caravan

1 Answer

Adjust engine belt tension

1995 Dodge caravan 4 cynlender adjust engine belt tension

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

This machine is equipped with an automatic belt tensioner do NOT need to have their belts adjusted. Be sure, however, to inspect/replace the belts at the proper intervals. A bad belt is always bad news because when it snaps, all drive power to whatever it turns is lost. That means the water pump quits circulating coolant through the engine, the alternator quits producing amps, the power steering pump ceases to assist steering, and the air conditioner quits cooling.

If the tensioner isn't working right, you replace it. Tension is determined by the tensioner and is not adjustable.

Thanks
Kinldy rate the answerr
Kevin

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 dodge grand caravan serpentine belt directions,diagram 3.3 ltr


0900c1528003c191.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 11: Accessory drive belt adjustment-3.3L and 3.8L engines
All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.

  1. Disconnect the negative battery cable.
  2. Raise the front of the vehicle and safely support it with jackstands.
  3. Remove the right front splash shield.
  4. Release tension by rotating the tensioner clockwise.
  5. Remove the belt and install a replacement.
  6. Proper belt tension is maintain by the dynamic tension.
  7. Install the right front splash shield. Lower the front of the vehicle.
  8. Connect the negative battery cable

May 03, 2012 | 1998 Dodge Grand Caravan

1 Answer

How do i take of a pulley and tensioner of a 94 Dodge Caravan 3.0 L V6


You'll need a Serpentine Belt Tool and a socket set.

Rotate the Caravan's serpentine belt tensioner assembly clockwise to relieve the tension on the belt. Slip the belt off the tensioner with your free hand before rotating the tensioner back to its home position. Remove the tool.
Extract the two mounting bolts that hold the serpentine belt tensioner assembly to the Caravan's front engine cover using your socket set. Depending on your physical size and dexterity, you may find this easier to accomplish through the top of the engine well or through the passenger-side wheel well.
Pull the old serpentine belt tensioner assembly out of the Caravan's engine bay by hand. Place the new serpentine belt tensioner assembly on the Caravan's front engine cover and bolt it in using your socket set.
Rotate the new serpentine belt tensioner assembly clockwise with the serpentine belt tool and then place the belt on the pulley by hand. Rotate the new serpentine belt tensioner assembly back into place. Remove the tool and close the hood.

May 19, 2011 | Dodge Caravan Cars & Trucks

1 Answer

Replace alternator


The alternator belt on the 1999 Dodge Caravan also controls the air conditioner compressor, the water pump and the power steering pump. The belt is called a serpentine belt, and it is designed to fit around all of the accessory pulleys at the same time. As the belt travels around each accessory pulley, it enables the accessory to operate. Once the belt is damaged, cracked or frayed, you should change it before it breaks. If that happens, each of the accessories will stop working.

Open the hood and prop it up so that it does not fall. Engage the parking brake.

Inspect the top surface of the fan shroud for the serpentine belt routing diagram. Follow the routing instructions on the diagram to install the new belt.

Locate the serpentine belt self-adjusting tensioner on the front of the engine. The tensioner is directly below the alternator. Use the bolt that connects the tensioner pulley to the tensioner arm to rotate the tensioner.

Turn the tensioner device counterclockwise to move the tensioner. This will relieve the tension from the belt. Once the belt has enough slack in it, slide the belt out from under the tensioner pulley.

Lift the belt off each accessory pulley. Slide the belt around the fan blades and out of the engine area.

Lay the old belt next to the new belt to ensure that the new belt is the correct width and length. Slide the belt around the fan blades and around the crankshaft pulley on the bottom of the engine.

Follow the belt routing diagram to position the belt around the air conditioner compressor pulley, the power steering pump pulley, the water pump pulley and the idler pulley. Once the belt is routed inside each accessory pulley, inspect the belt to make sure that it is securely inside the pulleys.

Crank the 1999 Dodge Caravan for 10 to 15 seconds to completely seat the belt ribs in the grooves on each accessory pulley. Shut the engine off and close the hood.

If the belt routing diagram for the 1999 Dodge Caravan is missing, use a pen and a notepad to draw the exact routing of the old belt and use it when installing the new belt.

Nov 26, 2010 | 1999 Dodge Caravan

1 Answer

I am wanting serpintine belt diagram for a 1993 dodge caravan 3.3 6cyl


ccessory Drive Belt 85611042.gif

Accessory drive belt adjustment-3.3L and 3.8L engines
Click to Enlarge

All of the belt driven accessories on the 3.3L and 3.8L engines are driven by a single serpentine belt. The belt tension is maintained by am automatic tensioner.

  1. Raise the front of the vehicle and safely support it with jackstands.

  2. Remove the right front splash shield.

  3. Release tension by rotating the tensioner clockwise.

  4. Remove the belt and install a replacement.

  5. Proper belt tension is maintain by the dynamic tension.

  6. Install the right front splash shield. Lower the front of the vehicle.

Oct 23, 2010 | 1993 Dodge Caravan

1 Answer

Need a picture of how the belt goes on mine came off 1995 dodge caravan


When you buy the belt from Orielly's auto parts you can ask for a diagram for the routing of the belt. The belt tensioner is located near the middle of the engine towards the left. It can be adjusted by using a wrench but be careful it has a lot of tension.All you have to do is put the wrench on the center bolt and pry up or down until it moves.

Oct 08, 2010 | 1995 Dodge Grand Caravan

2 Answers

2006 Dodge Gr. Caravan. Loud humming noise upon


Misalignment of the belt, incorrect belt, worn or loose tensioner, Too tight of an adjustment (many service centers do this on purpose so when the belt breaks in it becomes properly adjusted, I do not believe in this philosophy), The belt is actually one long belt called a serpentine belt.....

Feb 21, 2010 | 2006 Dodge Grand Caravan

1 Answer

I am trying to put on the engine belt for a 1992 Dodge Grand Caravan with a 3.3L engine with air conditioning. Do you have any diagrams that show the positioning of the belt and where are the tighteners to...


54162ee.jpgI normally find it easier to put belt on all pulleys below and then slip it on alternator last, that way I can hold wrench on tensioner with one hand, and slip belt on alternator at same time. Not easy, but if long wrench, or pipe over box-end wrench on tensioner, will make it easier.

Jan 27, 2010 | 1992 Dodge Caravan

1 Answer

I have a 1991 dodge caravan with the 3.3 engine, i just replaced the water pump and need the diagram to put the belt back on, and how to tighten it.


From 1991-1995 the same belt is used. Here is the diagram and also the tension you can locate it for tightening adjustment. bdfe331.jpgd9fe295.jpg

Sep 07, 2009 | 1991 Dodge Caravan

1 Answer

Where is the belt adjuster to relaese the belt from pulleys


This engine configuration probably uses an adjustable idler bearing and wheel assembly to apply tension to the serpentine belt that drives almost all the accessories. You'll need to loosen, (DO NOT REMOVE!) the hub bolt, then turn the adjusting bolt behind the wheel to provide the slack you need.
Or, did you mean the timing belt? That one has an oil-filled tensioner that requires clamp compression to collapse down the right clearance. Did that help? Let us know...accordianman

Dec 16, 2008 | 2000 Dodge Caravan

2 Answers

Serpentine belt replacement


What engine do you have? The 3.3 and 3.8 engines have a single serpentine belt, and a belt tensioner, so no adjustment is needed. Did you replace the tensioner, and want to know how much to torque it? countrycurt0

Jul 20, 2008 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
1995 Dodge Caravan Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...