Question about 1999 Lincoln Town Car

1 Answer

Why does power window go down but needs 20 min to rest before going up?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 4 Answers

Windows have a down and up sensor. If the down one is not sensing and turning the motor off it will overheat and need time to cool down before moving up again. Remove door panel and check window down sensor. It is either bad or not adjusted properly.

Posted on May 07, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INTERNAL TEMPERATURE FOR BEEF


it all depend how you want your Beef

Rare:

• 120-130 °F (50-55 °C) Internal appearance very red; very moist with warm juices. Approximate cooking and resting time: 20-25 min./lb. plus 8-10 min. resting

Medium-rare:

• 130-140 °F (55-60 °C) Internal appearance lighter red; very moist with warm juices. Approximate cooking and resting time: 25-30 min./lb.. plus 8-10 min. resting

Medium (with a touch of pink):

• 140-150 °F (60-65 °C) Internal appearance pink red color; moist with clear pink juice. Approximate cooking and resting time: 30-35 min./lb. plus 8-10 min. resting

Well-done:

• 150-165 °F (65-75 °C) Internal appearance no pink or red, slightly moist with clear juices


taken from
Cooking Temperatures for Beef

Oct 30, 2016 | Cars & Trucks

1 Answer

Window rolled down and stayed down. How do I get it to roll back up?


Windows rolling up and down by themselves and ABS, ESP/BAS, and TC ...

www.challengerforumz.com/.../windows-rolling-up-and-down-by-thems...
Nov 13, 2012 - The top part of the window goes up and down after i shut the cardown. ... To not have this happen until my appt at the dealer, i rolled the window down a crack so it wont go up and down. ... cracking just enough to let wind in, then if i have to fight it for 2 min, before it finally stays up. .... Joined: Aug 23, 2009. Dodge Challenger Electrical Problems and Questions ' Dodge ...
Apr 30, 2015
Auto Window's Down Function
Jun 20, 2013
Car unlocks by itself
Jul 8, 2010
Smart Window Recalibration Issue?
May 20, 2009
More results from www.challengerforumz.com

Cable Failure in Window Regulator/Motor May Cause ...

repairpal.com > Problems > Dodge > Charger
Dodge Charger Cable Failure in Window Regulator/Motor May Cause Power Windowsto Become Inoperative. This is a verified ... 2009 Dodge Charger128,000Visitor ... Thewindow rolls down but wont go up except when driver door is open.

How to instantly lower your car windows with the key remote ...

www.cnet.com > Security

CNETAug 30, 2012 - How to instantly lower your car windows with the key remote ... Dodge (Challenger/Charger/Durango/Grand Caravan/Journey/Ram); Fiat (Bravo) ... that's how the windows rolled down because I know I didn't roll them down is this a ... Honda Accord 2009 V6, American assembly -the feature works perfectly ...

Dodge Challenger Re-Calibration windows trick - YouTube

? 5:00
https://www.youtube.com/watch?v=zRLzN61GaS4

Dec 21, 2015 | 2009 Dodge Charger

1 Answer

Engine shut down while driving


2 different issues, Engine shutting off usually with your car is the ignition module under the coils, Windows usually is a broken wire in between the door and the body jam, inside the rubber tube. Might be suprised to find a couple more wires broken

Aug 10, 2014 | 1996 Pontiac Bonneville SE CA Value

1 Answer

I replaced the fuel pump relay, noticed that i had a blown fuse marked ecm. repaced that.ran truck for around 20 min.turned off. when i went to start again it wouldnt. looked at that same 20 amp fuse


There are two ECM fuses - marked ecm 1 and ecm B.
ECM B powers the fuel pump and the Veh control module which handles most of the sensors.
ECM 1 powers the ignition module, coil, injectors and the rest of the engine sensors.
You may need a repair book with diagrams to check all of the circuits for shorts.

Jul 30, 2012 | 1999 GMC Sierra 3500

1 Answer

THET DETERET SIGNAL IS ON CANNOT START COBALT 2008


if you have not changed any keys,then first turn the ign. switch on for 20 min.drivers window down and all phones unplugged, radios off,no acc. on. so the anti theft can perform a system relearn. if everything is ok the engine will start after the 20 min. relearn.if not you will need to have the vehicle towed to the dealer for a computer scan for dtc and a reprogram.hope this helps.

Dec 06, 2009 | 2005 Chevrolet Cobalt

2 Answers

Passenger side power window does not go down


I would start by locating the fuse for the power windows, if one side is working move to step 2. I have replaced window regulators on several american vehicles, the honda should be no different. Youcan order the power window regulator online on autopartswarehouse.com, or take a chance at your local junkyard. you will need to remove the door panel, start at the release mechanism inside, usually 1 screw with a small plastic cover. in addition, 1 screw in the grab area of the arm rest, also covered. at the bottom of the panel under the arm rest start to pry off the door panel, you can take it off with a flat blade screwdriver or flat pry bar. it will make a snapping sound. then proceed, there are about about 8-10 total clips. after this is done, you will need to un hook the power window and door lock connections. next remove the door light connection at the bottom of the door. remove the plastic lining as careful as possible. you will need to put this back on after you finish. usually there are three screws attached to the regulator and 4 screws, 2 on each side of the alignment tracks. in addition there are 2 screws holding the window to the brace that moves up and down. remove the window bolts first and remove the glass, then proceed with the rest of the bolts, then re assemble as you have taken apart. On the hondas I would say about 2-3 hours will be need for each window. Good Luck!!!

Sep 09, 2009 | 1996 Honda Civic

1 Answer

Power windows and overhead lights/radio will not dim on2004 jeep


Sounds like the body control module.. you are going to have to take it to a Jeep dealer..they have to program it for your jeep..

Its not going to cost you and arm and a leg...couple fingers maybe..but no arms and legs. Seriously though, its not that expensive.. and those things go out ALL THE TIME.. probably top 5 as far as jeep problems are concerned.

Jun 20, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Drivers side power window is stuck down. What can I do ??


Vehicles with power windows
  1. Connect the window operating switch electrical connector.
Vehicles with manual windows
  1. Install the window regulator handle.
All Vehicles
  1. Remove the window glass retaining bolts.
    • Align the retaining bolts with the access holes.
Vehicles with power windows
  1. Disconnect the battery ground cable.
All Vehicles
  1. Raise and support the glass in the fully closed position (power window shown).
  1. Detach the window motor and regulator (power window shown).
    1. Remove the regulator assembly bolts and allow the assembly to rest in the bottom of the door.
    1. Remove the regulator motor (three bolts), or manual regulator winder (two bolts) and allow the assembly to rest in the bottom of the door.
Vehicles with power windows
  1. Disconnect the regulator motor electrical connector.
Vehicles with manual windows
  1. Disconnect the window regulator handle.
All Vehicles
  1. Remove the window regulator (power window shown).
Vehicles with power windows
  1. Remove the motor mounting plate nut (power window only).
  1. Remove the motor mounting bushes.

Apr 16, 2009 | 1998 Ford Contour

2 Answers

Renault clio window button


you dont need a diagram to change a switch!!
simply remove switch panel from door rest using a torex headed screw driver unclip switch and replace with new or second hand 2 mins work!!

Apr 14, 2009 | 2005 Renault 181

3 Answers

Hi i have a land rover freelander 00.back door wont open or tailgate windoe wont go down,the rest of the doors work. help


try a hard restart, if that doesnt work then you need a new rear window motor. for the hard restart all you have to do is disconnect the battery cables and touch the positive and negative together for about 8 seconds. if that fails then a new motor it is.

Mar 03, 2009 | 1999 Land Rover Discovery

Not finding what you are looking for?
1999 Lincoln Town Car Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

fordexpert

Level 3 Expert

5467 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...