Question about Cars & Trucks
May be you should make a diagnostic and you can do it in a garage or you can do it by yourself if you want to do it by yourself you need some tools and you can find some good ones here: http://www.xcardiag.com
Posted on May 07, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in the following picture:
Posted on Oct 23, 2008
If you are looking for the fan blower resistor, it is located behind the glove box. No tools need to get to it and a nut driver to remove the 2 screws to replace it. A 20$ part.
Posted on Feb 05, 2009
it's the blower motor resistor , it's behind the glove compartment, just make sure you disconect the neg. for battery first, open the glove comp. and pull the rubber stops towars the center so you can let the glove comp. hang all the way to the floor , the resistor it's in front of you, disconect the two conectors there's one big with 6 0r 8 wires coming out and another with only two, take them out by pressing on the side of each one, remove it , put the new one on , conect the battery and your done. it's about $ 13.00 at o'riellys auto parts .
I hope this fix yor problem.
Posted on Mar 31, 2009
This is alittle tricky getting to some of the bolts but its not too hard to do otherwise. 2 bolts hold on the starter IIRC they are 13mm bolts. make sure your battery is dissconected by the black cable. then there will be 2 nuts holding on the starter wires. one will be 8mm and the other 13mm. remove them with care cause the wires may and can break. when you remove starter check wires for corrosion or if they look fraigle. repair them if damaged.
then to put it back in is the same way you took it out. should take about 1.5 hrs total if you have never done it before.
Overall i would say skill level 3/10 only cause its trickey getting to that top bolt sometimes.
Posted on Apr 29, 2009
The fuse box is located under the hood. There is component map printed on the inside of the cover. This tells you on your model where the fuse or relay is located
Posted on Jan 19, 2010
Tips for a great answer:
Nov 09, 2014 | 1994 Dodge Caravan
Oct 07, 2010 | 2002 Dodge Grand Caravan
Jul 18, 2010 | 2002 Dodge Caravan
Apr 10, 2010 | 1999 Dodge Grand Caravan
Jun 26, 2009 | 2002 Dodge Caravan
May 08, 2009 | 2001 Dodge Caravan
Apr 28, 2009 | 1989 Dodge Caravan Cargo
Jan 06, 2009 | 2002 Dodge Grand Caravan
13 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: