Question about 1999 Nissan Altima

1 Answer

1999 Fan runs only on highest setting

I have the same problem with my 1999 Nissan Altima GXE. The fan stopped working on settings 1, 2, 3 one after another. As of now, its working on setting 4. Not able to open the dashboard to check, whether its a loose contact or some other problem.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Nissan Master
  • 3,854 Answers

The blower resistor has gone bad and needs to be replaced, it's common for it to burn out due to time. You can pick one up at Auto Zone and they will have the step by step instructions to replacing the resistor. 
The blower motor resistor is under the dash, next to the blower motor. You will need to remove the under dash panel to access it. It is very easy to replace, just two screws hold it in. May take about 15 to 20 min with simple hand tools. 

Good luck and hope this helps. 

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need firing order on a 2001 nissan altima gxe


For the 2001 Nissan Altima GXE 2.4L DOHC In-Line 4-Cylinder:

Firing Order:
1-3-4-2

Cylinders:
........(back)
1......2.......3.......4
........(front)

Distributor:
.(back)
3.......1
....O....
4.......2
(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!



Apr 02, 2010 | 2001 Nissan Altima

3 Answers

97 Nissan Altima AC/heater fan only works on highest setting


Sounds like the blower resistor module needs to be replaced. Could also be the switch.

Nov 06, 2009 | 1999 Nissan Altima

1 Answer

Volvo S70 A/C only blowing cold on 5th (highest) setting


My guess would be that the resistor block located in side of air duct between blower fan and evaporatorbox has burnt out one or two resistor coils and requires replacing or repair.I have never seen Volvo A/c but would expect this to be the problem.The block is located in the airstream to keep it cool .By moving your setting switch you are selecting differing resistance coils (or a combination of same) thus with failure lose various speeds.

Jun 02, 2009 | 1999 Volvo S70

1 Answer

A/c fan, only works on highest setting


You have a problem with your reostat. This is located under your dash behind the glove box and beside the blower motor. Unplug the plug and take out two screws hold it in place. Take it to your local recycle yard and get a good used one make sure to ask if it was tested and if it has warranty. Please let me know how you make out.
Thank you

Jun 01, 2009 | 1994 Nissan Altima

3 Answers

How to access ac blower and fan switch, 1999 Volkswagen Beetle?


if its work in only low speed u have to replace the blower motor resstor which located close to the blower
let me know have a good one

Mar 31, 2009 | 1999 Volkswagen Beetle

2 Answers

99 Nissan Altima blower fan works only on highest setting (#4)


Resistor switch. The rotary switch on the dash is very, very uncommon. It is also not the blower, because it works.

Mar 09, 2009 | 1999 Nissan Altima

1 Answer

HVAC Blower functions only at highest (4) switch setting


if the blower works on high then its not a fuse it could be the switch or the resistor that cuts back power for the lower settings

Nov 18, 2008 | 2002 Nissan Altima

Not finding what you are looking for?
1999 Nissan Altima Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...