Question about Pontiac Sunfire

1 Answer

How do i repair a rear view mirror that has fallen off?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Clean window and back of mirror real good with alcohol Let dry Go to auto parts store and buy rear view mirror glue Apply small amount to back of mirror and press onto windshield Hold for a couple of minutes and then let dry for a couple of hours before you adjust it

Posted on May 06, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: rear view mirror

I think that it has to be given a quarter turn, sort of like changing the bulbs in a headlight assembly

Posted on Oct 17, 2008

  • 10 Answers

SOURCE: rear view mirror replacement

not 100% sure, but seem to remember that theres an alen key fastener, which is under a cap/flap at the bottom of the mirror fastening close to the glass.

Hope that helps

Steven

Posted on May 13, 2009

frcs68
  • 1605 Answers

SOURCE: Reattach rear view mirror

there is a small alan screw in the base of the backup mirror. loose it and slide the mirror back on to teh base on the windshield and tighten down the alan screw.

Posted on May 13, 2009

  • 151 Answers

SOURCE: how do i get the rear view mirror back on?

I am assuming you are talking about the interior rear view mirror and not the side rear view mirror. Most auto parts stores sell an adhesive glue to fix the interior rear view mirror. Most of these mirrors have two parts to them. One part is the bracket that glues to the windshield and the other part is the rear view mirror assembly. Before gluing the bracket to the glass check and see how the mirror assembly attaches to the bracket. There will often be a screw that fixed the two together.

Posted on Feb 21, 2010

  • 1 Answer

SOURCE: Toyota Avalon Rear View Mirror

Hi-,
I had the same problem - the inside rear view mirror fell off during a hot summer day. I bought the mirror glue (adhesive) and wondered how to I separate the metal button from the mirror. Enventally, I tried the following and successully separated the metal button from the mirror: There is a little squre slot on the plastic sheath of the metal button. Please find a small flat-ned screw driver whose tip can fit into the sqare hole. put the screw driver into the hole and put it all the way inside down - which will open a little bended metal piece that stops the buttom; at the mean time, slide the metal button towards outside. As the bended metal piece opened uder the pressure of the screw driver, the metal button is freely moveable and can be slide out.
I did this successfully for my Toyota Avalon 1998 car.

Hope it helps.
Wei

Posted on Jul 23, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Automatic rear view mirror not working when lights approach from rear


Troubleshooting Your Auto-Dimming Rear View Mirror ...

www.doityourself.com/.../troubleshooting-your-autodimming-rear-view-...
An auto-dimming rear view mirror is a great convenience when there is too much lighton the mirror. This is not only good for you as the driver, but also for ...

How To Fix Malfunctioning Rearview Mirrors - YouTube

? 5:58
https://www.youtube.com/watch?v=gz1aVM7WeQM
Sep 20, 2012 - Uploaded by iggy151
This is a short and dirty video describing how to repair rearview ... electrical malfunctions such as nonworking or ...

Dec 20, 2015 | Cars & Trucks

1 Answer

I need to replace my rear view mirror for my Mercedes Benz 1998 c230


if rear view mirror base plate fell off with the rear view mirror. you can go to auto parts store buy rear view mirror repair kit.

Jun 02, 2013 | 1988 Buick Regal

1 Answer

Rear view mirror has detached from the windscreen 3 times


both parts have to be cleaned and prepped use the 3M product.

Feb 04, 2013 | Volkswagen Golf Cars & Trucks

1 Answer

1995 GMC Sonoma - how do you reattach a rear view mirror that has fallen off? Found mirror hanging after a very hot day.


You can buy a repair kit at just about any good auto parts store. They work pretty good if you follow the instructions closely.

Dec 08, 2010 | 1995 GMC Sonoma

1 Answer

Rear view mirror has fallen off from the windshield


scrape it & reglue. (auto zone has the mirror glue)

Oct 28, 2010 | 2003 Toyota Camry

1 Answer

Replace passenger mirror


glass and motor availbable separately

Removal
NOTE: Do not remove the mirror assembly when repairing the individual mirror part. Individual mirror parts can be installed without removing the mirror assembly.
  1. Remove the front door trim panel; refer to Section 501-05.
  1. Remove the outside rear view mirror access water shield.
    gn1881a.gif
  1. Remove the speaker.
    1. Remove the screws.
    1. Disconnect and remove the speaker.
    gn1882a.gif
  1. Disconnect the outside rear view mirror electrical connector.
    gn1883a.gif
  1. Remove the outside rear view mirror.
    1. Remove the nuts.
    1. Remove the outside rear view mirror.
      • Feed the outside rear view mirror wiring through the opening in the front door.
    gn1884a.gif

Oct 26, 2010 | 2003 Ford Ranger Regular Cab

1 Answer

How to replace rear view mirror that has fallen off on a 1995 Buick Regal


Go to a part store and ask for rear view mirror adhesive. And follow the directions on the package. I have the best luck with the permatex brand.

Oct 13, 2010 | 1995 Buick Regal

1 Answer

Need a diagram for installing a drivers side electric power mirror on a 1995 mercury villager van


here's 1996, all I have. Please rate.

Mirror, Power — Outside Rear View NOTE: This procedure applies to both RH and LH power outside rear view mirrors.

Removal
  1. Remove the front door trim panel (23942). Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws and the outside rear view mirror mounting hole cover (17K709) from the front door (20124).




  1. Remove the wire clip.
  1. Disconnect the power outside rear view mirror electrical connector.




  1. Remove the three power outside rear view mirror bolts and the power outside rear view mirror.




Installation
To install, reverse the removal procedure. Tighten the three power outside rear view mirror bolts to 3-4 Nm (27-35 lb-in). Glass, Outside Mirror
Removal and Installation
Refer to the glass replacement procedures in Manual Mirror for power outside rear view mirror glass (17K707) Trim Cover
Removal
  1. Remove the front door trim panel. Refer to Section 01-05 for the removal procedure.
  1. Remove the two outside rear view mirror inside mounting hole cover screws.


    Remove the outside rear view mirror mounting hole cover.
Installation
To install, reverse the removal procedure. Mirror Control
Removal
  1. Use a small flat-blade screwdriver to pry the power outside rear view mirror control switch from the instrument panel (04320).


May 13, 2010 | 1995 Mercury Villager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...