Question about 2007 Pontiac G5 Gt Coupe

Open Question

How to replace serpentine belt pontiac g5 - 2007 Pontiac G5 Gt Coupe

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: serpentine belt

When you open the hood there is a diagram on a sticker that shows exactly how to do this. Should be on the front lip or the side of the engine compartment. You have to make sure you get it lined back up right and remember to check it once the engine has been started and make sure it running on all the pulleys correctly.

Here is a good diagram that should be able to help in case your sticker was damaged or removed. Good luck!

http://www.2carpros.com/car_repair_information/tec_info/1999/pontiac/grand_am/1999_pontiac_grand%20am_drive_belt_routing_diagram.htm

Posted on Nov 11, 2008

Ad
  • 1 Answer

SOURCE: 2001 pontiac sunfire serpentine belt diagram

go to autozone.com and it will give you the belt diagram

Posted on Jan 16, 2009

bunnydawg
  • 5158 Answers

SOURCE: 2004 pontiac grand prix serpentine belt replacement/ routing

first look underneath the hood... is it there on a sticker... if not i'll need the size of the motor to let you know

Robert

Posted on Jan 27, 2009

adve1958
  • 246 Answers

SOURCE: how to replace a serpentine belt on a 2004

  1. Lift the car so you can work from underneath when needed.
  2. Disconnect the battery . Just to be safe.
  3. Take the serpentine belt off.
  4. Remove the alternator.
  5. Remove the A/C compressor. (You can do it without removing, but it's a royal PITA... LOL) Don't unhook the lines, just unbolt and move out of the way.
  6. Remove the worn tensioner from t he block. (You need to unbolt the pulley first to get to all the tensioner bolts)
b523fc4.gif

Posted on Sep 08, 2009

KCGTODAD
  • 169 Answers

SOURCE: replacing the serpentine belt on a 2003 pontiac

Hello! Here you go.


a61d047.gif



Hope this helps!

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I replaced the idler pulley and serpentine belt on my Pontiac G5 and now it makes a horrible noise for about a minute and the idles and stops making the noise. What's wrong ?


Take the belt off and turn all of your pullies by hand an make sure none of them are catching or siezed. Also run the car and watch your ac compressor, when it kicks in make sure it is turning

Feb 18, 2017 | Pontiac Cars & Trucks

1 Answer

How do you replace a fan belt on a 2004 pontiac montana


Here's a series of videos that explains how to replace the serpentine belt on your 2004 Montana.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here's a diagram to help you remember how to rout the new belt...

6f452ae.jpg

Nov 30, 2009 | 2004 Pontiac Montana

2 Answers

Changing serpentine belt 3.8 2007 pontiac grand


  • Make sure your new belt exactly matches the old belt demensions
  • Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
  • Loop the old belt around the pulleys & fan
  • Install new

Oct 17, 2009 | 2007 Pontiac Grand Prix GXP Sedan

1 Answer

How to replace a serpentine belt on a 2004


  1. Lift the car so you can work from underneath when needed.
  2. Disconnect the battery . Just to be safe.
  3. Take the serpentine belt off.
  4. Remove the alternator.
  5. Remove the A/C compressor. (You can do it without removing, but it's a royal PITA... LOL) Don't unhook the lines, just unbolt and move out of the way.
  6. Remove the worn tensioner from t he block. (You need to unbolt the pulley first to get to all the tensioner bolts)
b523fc4.gif

Sep 08, 2009 | 2004 Pontiac Grand Am

1 Answer

Need help replacing a serpentine belt....any ideas


Locate the belt tensioner. There should be a place on it where you can insert a 3/8's drive, or 1/2" drive ratchet. Once you get the ratchet in position, you can remove the belt by either pushing down, or pulling up the ratchet handle.

Mar 26, 2009 | 1999 Pontiac Grand Am GT

1 Answer

I have a 91 pontiac 6000, I replaced the alternator and now I cant put the belt back on, I need a diagram of it


Hi,

you need a Belt Tensioner Serpentine Tool, to lift the Arm and replace the Belt,
disconnect negative Battery Cable, first!

connect Serpentine Belt, starting at bottom crankshaft, work belt, up the belt rotates toward, Radiator , so the Belt, goes under the Water Pump, and under the Belt Tensioner.



Dec 21, 2008 | 1991 Pontiac 6000

1 Answer

Replace serpentine belt


i have a 97 sunfire with a 2.2 and a/c my sticker is intact would you like a pic?

Dec 14, 2008 | 1997 Pontiac Sunfire

2 Answers

Serpentine belt diagram


The belt installation diagram is under the hood, look on the shock tower or over the radiator next to the Federal emissions certification sticker.

Sep 01, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
2007 Pontiac G5 Gt Coupe Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...