Question about 2002 GMC Envoy
Got into the car started and would not go into reverse would going to drive but not reverse
Suggest you check the level of the transmission fluid, with engine in Park and running.
How to Check and Add Fluid to Your Automatic Transmission
If the fluid level is ok, then the problem could out of alignment linkage or a faulty transmission.I suggest you have the vehicle scanned for any fault codes, which may identify the problem. Auto Zone and Advance Auto can scan the Vehicle.
Posted on May 06, 2014
Its your transmission has problem could your reverse disc worn out or your reverse servo not functioning clug up or broken o ring or valve body leaking
Posted on May 06, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 02 envoy
Just like when you have a loss of 4x4 drives, it is a drive sensor and elevator problem. It seems like everyone of the major types of fixes like this are 600.00 at the dearlership,, takes about 2 or 3 hours,, but vehicle will run like new afterward. I dont think this is a do it yourself type of a project.
Posted on Dec 01, 2008
SOURCE: My 2002 GMC ENVOY SLT
If its stuck in reverse then it wont start, this could be a bad tranny or the shift cable broke or came loose, theres a braket under the dash that holds the shift cable before it connects to the shifter linkage arm and that braket sometimes gets loosened up and the other problem is the shifter tube may have broken. a good way to see if its the tranny or the shifter asm is to get under the truck make sure to block wheels and put e-brake on. dissconnect linkage at the tranny and move the selecter arm on the tranny, if it in reverse then it should move o click in one direction which is park and the other way is into neutral then drive and so on, try to get it into park and seeif truck starts, if it does then its not the tranyy but rather it the shifter, another thing before doing that have someone turn key on but dont try to start it just move the shifter and se if it moves the arm on the trany, you will see this from under the side of truck on driverside. good day.
Posted on Jun 19, 2011
Tips for a great answer:
Mar 15, 2011 | 2002 GMC Envoy
Dec 31, 2010 | GMC Envoy Cars & Trucks
May 17, 2010 | 2002 GMC Envoy
Oct 15, 2009 | 2002 GMC Envoy
Mar 16, 2009 | 2002 GMC Envoy
Oct 20, 2008 | 2002 GMC Envoy
Jun 11, 2017 | 2002 GMC Envoy
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: