Question about 1990 Volvo 240

1 Answer

NO POWER TO FUEL SYSTEM AT THE FUSE BOX - 1990 Volvo 240

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Check fuse box, then check fuel pump relay. They burn up inside if there's a short.

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 neon will not start


Check the ASD relay in under hood fuse/ relay box. ASD stands for automatic shut down relay. Powers up pcm ,fuel injectors and ignition system an O2sensor heaters .crank over the car an check for power at O2sensor heater fuse in the underhood fuse box ,no power means bad relay !

Jan 18, 2015 | Cars & Trucks

1 Answer

05 Chevy cobalt have no power to fuse block for fuel pump


You have no voltage at 15 amp fuel pump fuse in the under hood fuse/relay center ? There is a fuel pump relay also in same under hood fuse box. The fuel pump fuse gets power from the fuel pump relay. The ( PCM ) engine computer controls that relay, gives power or ground electronically to turn the relay on giving power to the fuel pump through the fuel pump fuse. You could have a bad relay or an anti-theft system problem . What engine does you vehicle have 2.0 L or 2.2 L the 2.0 L engine gets power differently to fuel pump .

Dec 28, 2014 | 2005 Chevrolet Cobalt

5 Answers

No power to fuel pump


I see that you posted the question yesterday. Hopefully by now you have resolved the problem.
If the problem still exists, check to see if you have power to the Fuel Pump Relay in the black plastic Relay Box located at the right front corner of the engine compartment. But first, give the box a modest tap with a hammer-like device. (A mechanic would never do that.)
If the relay is stuck, maybe time to replace it.
Write back with a status report. If we need to look elsewhere, let us know.

Sep 12, 2014 | 1997 Chevrolet Lumina

1 Answer

How to test fuel pump


Use a multimeter at the plug to pump! If there is no power, check the fuses under the dash, as well as the fuse box under the hood! The lid under the hood will tell you which fuse operates the fuel system. Could just be a bad fuse, or a broken wire!

Apr 18, 2014 | 1996 Chevrolet C1500

1 Answer

Radio windows and fuel read out stopped working


Check Fuse 2.3 (20 Amp). See electrical diagram below.

When it goes, it'll take out the audio and "Cluster and Panel Illumination."
(assuming your vehicle doesn't have an OEM Nav system - in which case fuse 2.3 would
supply power to the Nav system).

Fuse 2.3 is located in the CJB (Central Junction Box) - not the BJB (Battery Junction Box),
nor the AJB (Auxiliary Junction Box).

Also, check fuses F1.6 (60 Amp), and fuse F1.62 (30 Amp) in BJB (Battery Junction Box).
Also, check fuse F2.17 (15 Amp) and the "Accessory Delay Relay," both in the CJB (Central
Junction Box).


archaeology_6.gif


Here's the electrical diagram for 2005 Mercury Mountaineer Power Windows:
Note how fuses F1.6, F1.62, F2.17, and 'Accessory Delay Relay" will all
disable the power windows.

archaeology_56.jpg

May 13, 2011 | 2005 Mercury Mountaineer

2 Answers

I'M HAVING FUEL SYSTEM PROBLEMS ON A 2000 CHEVY BLAZER. I HAVE POWER RUNNING TO THE RELAY BOX, AND TO ALL RELAYS AND FUSES EXCEPT THE FUEL PUMP RELAY


Could be that the fuel pump relay is bad, have you switch out the fuel pump relay with another relay of the same specs. If that doesn't work, then check if there is another fuse that related to the fuel pump, could be like those fuse under your kick box panel if it is blown. If not, you could have bad fuse box.

Jan 17, 2011 | 2000 Chevrolet Blazer

1 Answer

2000 ranger fuse diagram


Fuel Pump relay switch is in the main box usually located on the drivers side Fender in a black box. According to the owner's manual in the power distribution box in the engine
compartment (Ford recommends disconnecting your battery)
Relay # 5 is the fuel pump relay , and also in the PD BOX is a 20 amp mini-fuse
for the fuel pump relay + RAP module in location # 9


( P.S. - don't forget your fuel pump inertia switch , in the right front passenger area ,
by the right front kick panel )Sometimes this gets kicked by passenger or if the car is bummed hard it could set this item to shut down fuel system. Best of Luck

Aug 28, 2009 | 2000 Ford Ranger SuperCab

1 Answer

No power to fuel pump on 99 chevy venture


If you do not have power on the GRAY wire at the fuel pump.........
switch the fuel relay with a same type good relay in the relay box and check for power again.
REMEMBER ...YOU WILL ONLY HAVE POWER 2 OR 3 SECONDS AT PUMP AFTER KEY IS TURNED TO RUN POSITION......after key has been off for 10 seconds.(or when there is oil pressure)
If no power in the gray wire at this point and you have checked ALL fuses in engine compartment and on right (pass ) side of dash panel facing pass door.......add your own jumper to supply power to system at fuel pump fuse and test again.........if power at pump now....install a permanent jumper (SWITCHED POWER....OFF WITH KEY) at fuse box......if still no power check all connections between fuse box and pump.....or run new power feed wire to pump gray wire and disconnect old.

Aug 19, 2009 | 1999 Ford Windstar

1 Answer

Fuel pump is not pumping on my ford ltd crown victoria. i need a fuse diagram so i can see if it is just the fuse or if i need to replace the pump.


There is both a fuse and a relay for the fuel pumps electrical system. The image below of the Power Distribution Box is located in the engine compartment.

Fuse/Relay Location: 5
Fuse Amp Rating: 20 Amp Mini Fuse
Power Distribution Box Description: Fuel pump

Fuse/Relay Location: 203
Fuse Amp Rating: 1/2 ISO
Power Distribution Box Description: Fuel pump relay

eec14ad.jpg

Apr 14, 2009 | 2003 Ford Crown Victoria

Not finding what you are looking for?
1990 Volvo 240 Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...