Question about 1998 Chevrolet S-10 Pickup
1998 chevy s10 heater blowing cold air. What could be the problem?
You need to check your coolant level first. If it is low you have a coolant leak. No hot coolant=No heat
Posted on Jun 23, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
First be sure that you do not have the controls set to defrost the windows since on just about all vehicles nowadays with the controls set that way the air conditioner will be turned on...even if it is not so warm outside. So...be sure that you do not have any of the controls set to defrost and that the heater is turned all the way on.
It sounds like though that the control for the vents is not operating properly. This is a combination of mechanical movements of the vent flaps and small "air motors" that operate the flaps. These air units are controlled by air vacuum taken from the engine compartment through tiny hoses. If the hoses get cracks, holes or come loose from their fittings then your vents will not move correctly so it is a matter of looking and tracing each one of the hoses to make sure they are fastened correctly, have not come loose and are not cracked or leaking. The problem can even be in the engine compartment where the hose(s) connect to the engine vacuum system...so it will take lots of looking carefully with flashlights etc....good luck.
Posted on Aug 21, 2009
Tips for a great answer:
Jan 13, 2013 | Cars & Trucks
Jan 19, 2010 | 1998 Chevrolet K1500
Nov 11, 2009 | 1998 Ford Expedition
Oct 31, 2009 | 1998 Ford Explorer
Oct 16, 2009 | 1998 Chevrolet Cavalier
Aug 21, 2009 | 1998 Chevrolet S-10 Pickup
Feb 01, 2009 | 1998 Chevrolet S-10 Pickup
Jan 06, 2009 | 1996 Chevrolet S-10 Pickup
Dec 22, 2008 | 1999 Chevrolet Silverado 1500
1,572 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: