Question about 2012 Chevrolet Traverse LS 4dr SUV 3.6L V6 6-speed Automatic

Open Question

How To Remove cluster from 2009 Traverse?

Not sure how to remove bezel

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dealt_soul
  • 296 Answers

SOURCE: 2009 Chevy Traverse Intake Pluem Full of creamy

It it water or anti-freeze?

If its water then somehow water was sucked up through the air intake. Check the filter box for leaks. If no leaks in the filter box then check all connections from the air box to the intake plenum.


Posted on Jan 24, 2010

  • 41 Answers

SOURCE: 2009 Chevy Traverse with 3800 on it, w/ low coolant

good question with it being a 2009 i'd ask chevy

Posted on Apr 05, 2010

Rickygittins
  • 715 Answers

SOURCE: how do you remove the

I believe the center pieces are glued/double sided taped to the roof and the out side rails are bolted to the roof, need to remove the inside headliner.and then plug the holes.

Posted on Aug 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace the headlight switch assembly on a 1997 dodge grand caravan


The best I can offer is for a 1996 caravan:

REMOVAL
  1. Remove steering column cover.
  2. Remove over steering column bezel.
  3. Remove left end cover.
  4. Remove screw at left end of cluster bezel and headlamp switch.
  5. Remove screws holding cluster bezel to instrument panel from each side of steering column.
  6. Disconnect clip holding cluster bezel to instrument panel from above right vent louver.
  7. Separate cluster bezel from instrument panel.
Disconnect wire connectors from back of the bezel.

INSTALLATION
  1. Connect wire connectors into back of the bezel.
  2. Place cluster bezel in position on instrument panel. Use care not to place hands on louvers.
  3. Connect clips to hold cluster bezel to instrument panel. Use care not to add pressure on the A/C louvers to seat the cluster bezel clips.
  4. Install screws to hold cluster bezel to instrument panel on each side of steering column.
  5. Install screw at left end of cluster bezel and headlamp switch.
  6. Install left end cover.
  7. Install over steering column bezel.
  8. Install lower steering column cover.



25677031-lce4vfjfhjrgmukp0vzfrbis-3-0.gif

May 02, 2015 | 1997 Dodge Grand Caravan

1 Answer

How do you remove the luggage racks on top of a 2009 chevy traverse?


I believe the center pieces are glued/double sided taped to the roof and the out side rails are bolted to the roof, need to remove the inside headliner.and then plug the holes.

Aug 26, 2011 | 2009 Chevrolet Traverse

1 Answer

Remove instrument cluster ford focus 2007


First, lower the steering column locking lever and and release the retaining clips holding on the upper steering column shroud with a small flat-tip screwdiver. Remove the shroud. Remove the upper retaining screws from the instrument cluster bezel (surround) then unclip it from the dash. As you withdraw the bezel, disconnect the wires from the luggage compartment switch and trip computer, if you have them. Remove the four mounting screws from the instrument cluster assembly and withdraw the cluster. Disconnect the multi-plugs from the cluster. BE SURE to keep the cluster in the UPRIGHT POSITION to keep any silicone fluid from leaking from the gauges. Hope this helps out. Good luck!

Jun 03, 2011 | Ford Focus Cars & Trucks

1 Answer

Need schematics or instructions to disassemble dashboard on a 1995 Chev Tahoe. "idiot" lights need replacement


Disconnect the negative battery cable. If it is equipped with tilt steering, lower it to the lowest position. Unfasten the 8 clips that retain the instrument cluster bezel and remove the bezel. There are 4 clips on the top of the cluster and 4 on the bottom of the cluster bezel. Unplug the electrical connections from the headlamp switch, dimmer control and any other accessory switches that would interfere cluster removal. Unfasten the 4 cluster retaining screws and remove the cluster making sure nothing contacts the circuit connections. Turn the bulb assembly 1/2 turn to the left to remove. To reinstall, Install the bulb assembly. Place the cluster into position without touching the connector pins. Install and tighten the cluster retainers. Install the remaining components in the reverse order of removal.

Oct 23, 2010 | 1995 Chevrolet Tahoe

1 Answer

Need to replace bezel for instrument cluster in 2003 discovery


The seal in the bezel is probably dried and cracked.The bezel and lenze are easy to romove. Just turn it until the teeth line up in the back and it should pop loose. -------- Remove the instrument panel top cover.Remove the screws and remove the cluster bezel. Check out.Thanks.Keep updated.

Oct 01, 2010 | Land Rover Discovery Cars & Trucks

1 Answer

How do you change the dash light for the gas gauge ?


dissconnect neg batt cable,
1)remove over the steering column bezel by pulling up with a frim pull.
2)remove the four cluster bezel attaching screws.
3)tilt wheel all the way down,
4)pull cluster bezel back to remove.
5)remove the four screws holding cluster to dash
6)rotate top of cluster outward.
7)dissconnect connector to cluster.
8) remove cluster and on the back you will see the bulbs,you can flash a light through the bulb hole to make sure you have the correct bulb, hope this helps.

Mar 23, 2010 | 2005 Dodge Caravan

1 Answer

1995 jeep grand cherokee tach light is burned out. The rest work fine. How do I fix it?


you must remove the cluster heres some diagrams to help you. hope this helps, dissconnect battery,then remove ash tray,remove center bezel screws,remove bezel,now remove screws for holdingdash pad behind top of center bezel, pry defrost grill out of dash unplug sensors and set aside,remove screws holding dash pad to defrorst duct and cluster,open glovebox and remove screws holding pad, remove pad,pop out has clips holding,remove screws from cluster pull cluster up and out enough to unhook connector. heres some diagram to help.ab9f0ee.gif0b7cf5b.gif1ddb17d.gif

Feb 11, 2010 | 1995 Jeep Grand Cherokee

1 Answer

Dashboard Gauge


  1. Disconnect and isolate the battery negative cable.
  2. Remove Over Steering Column Bezel Replacement.
  3. Remove over steering column bezel.
  4. Remove left end cover.
  5. Remove screw at left end of cluster bezel and headlamp switch.
  6. Remove screws holding cluster bezel to instrument panel from each side of steering column.
  7. Disconnect clip holding cluster bezel to instrument panel from above right vent louver.
    1. Separate cluster bezel from instrument panel.
    2. Disconnect wire connectors from back of the bezel.
    INSTALLATION
    1. Connect wire connectors into back of the bezel.
    2. Place cluster bezel in position on instrument panel. Use care not to place hands on louvers.
    3. Connect clips to hold cluster bezel to instrument panel. Use care not to add pressure on the A/C louvers to seat the cluster bezel clips.
    4. Install screws to hold cluster bezel to instrument panel on each side of steering column.
    5. Install screw at left end of cluster bezel and headlamp switch.
    6. Install left end cover.
    7. Install over steering column bezel.
    8. Install lower steering column cover.

    I wouldnt Recomend This Procedure To Anyone juse for Cleaning Purposes Unless Your VIEW OF IT IS "SERIOUSYL IMPARED IF it Moisture Has Accumilated Behind Face of it Then Find Out WHY and Resolve THAT PROBLEM FIRST Onherwise Here you Are. Have A Great DAY !! And Please Dont forget to RATE Me Thank You !

Jan 15, 2009 | 1999 Dodge Caravan

Not finding what you are looking for?
2012 Chevrolet Traverse LS 4dr SUV 3.6L V6 6-speed Automatic Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...