Question about 2005 Hyundai Accent

Open Question

Accent 1.5 cyl head , rocker shaft bolts torque

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 36 Answers

SOURCE: torque specification

Any decent auto parts store should have that info.

Posted on Jul 26, 2009

Ad
johnjnail
  • 1702 Answers

SOURCE: good morning changing haed gasket

cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

Posted on May 12, 2011

ZJLimited
  • 17970 Answers

SOURCE: I need the torque pressure

zjlimited_1685.jpg

Fig. 12: Cylinder head bolt loosen and tighten sequence - 1.5L (VIN K), 1.6L (VIN R), 2.0L (VIN F) and 1996-98 1.8L (VIN M) engines

  1. Install the cylinder head using a new head gasket. Tighten head bolts to proper torque specification in sequence.

    2.0L (VIN F) and 1996-98 1.8L (VIN M) engines-Tighten M10 bolts to 22 ft. lbs. (30 Nm), plus 60°-65°, plus 60°-65°. Tighten M12 bolts to 26 ft. lbs. (35 Nm), plus 60°-65°, plus 60°-65°. 1.5L (VIN E), 1.5L (VIN J) and 1.5L (VIN K) engines-51-54 ft. lbs. (71-75 Nm). 1.6L (VIN F), 2.0L (VIN P) and 1994-95 1.8L (VIN M) engines-65-72 ft. lbs. (90-100 Nm).
  2. Install the rocker cover.

Hope helps.

Posted on Aug 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please confirm torque for 95 accent 1.5 head bolts.Thanks


Already answered on Fixya

According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.

Cylinder head torque settings for 1995 hyundai accent 1 5

Feb 02, 2017 | Hyundai Accent Cars & Trucks

1 Answer

Rocker arm pivot torque for olds cutlass 1987 307


Oldsmobile Torque Specs - GbodyOlds.com

www.gbodyolds.com/forum/showthread.php?754-Oldsmobile-Torque...
Feb 7, 2013 - 2 posts - ‎2 authors Oldsmobile Small-Block Engines Cylinder Head Bolts (1/2in. bolt) 130 ft. lbs. Cylinder Head ... Rocker Arm Pivot Bolt 25 ft. lbs. Rod Bearing ...

Rocker Arms - AutoZone

www.autozone.com/...Cutlass...1987.../Rocker-Arms/_/P-0900...

AutoZoneGM Cutlass RWD 1970-1987 Repair Guide ... To remove the rocker arms from the shaft, the nylon arm retainers must be removed. ... 7: Engine valve system, 260, 307, 350, 403 Oldsmobile built engines ... Unfasten the two bolts that attach the rocker arm pivot to the cylinder head. ... Torque the retaining bolts to 25 ft. lbs.

Dec 01, 2015 | 1987 Oldsmobile Cutlass Salon

1 Answer

Torque settings for rocker shaft for a 1998 7k toyota 1800


There is no such thing as a rocker shaft. There is a cam shaft, rocker arm assembly, Rocker arm, lifter etc. If you are talking about the rocker arm assembly that bolts to the head, it is 58 Ft/lbs. If you are talking about the actual rocker arms, you tighten them till they contact the push rod and the valve stem and then you put oil control clips on so the oil does not spray and you start the engine. You tighten them down till the chattering noise goes away, then back them off 1/8 to 1/4 turn.

Apr 25, 2014 | 1995 Toyota Corolla

1 Answer

Torque setting for 1972 Cororna


My manual shows an 8RC for 70 and 71 and an 18RC for the 72-74

18RC valve clearance HOT IN .008 EX .014 cold spec. .007 .013
Cyl head 72-82 Ft Lbs
Rocker caps 12-17 ft lbs
cam bearing clearance .001-.002
cam endplay .0017-.0066
oil tube 11-16 Ft Lbs

Jun 15, 2013 | Cars & Trucks

2 Answers

Good morning changing haed gasket on 1.5 hyundai accent how much torque for head bolts and rocker arm bolts


cylinder head bolts 52-55 ft lbs. engine cold 59-63 ft lbs. engine hot

rocker arm shaft bolts 15-20 ft lbs.

intake manifold bolts 11-15 ft lbs.

exhaust manifold bolts 22-30 ft lbs.

valve cover bolts 79-81 in lbs.

May 12, 2011 | Hyundai Motor 1998 Accent

1 Answer

Cylinder head torque settings for 1995 hyundai accent 1.5


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.

Feb 14, 2011 | Hyundai Motor 1995 Accent

1 Answer

I need to know what the cyl head torque and rocker arm torque is for a 1998 6.5 L GM turbo diesel.


Cylinder head bolts are done in 3 steps. Step 1 - 20 ft.-lbs
Step 2 - 50 ft.-lbs
Step 3: Tighten an additional
90 degrees.
Lifter guide plate bolts 18 ft-lbs
Rocker arm shaft bolts 40 ft-lbs
Hope this helps.

Aug 06, 2010 | 1999 GMC Sierra 3500

1 Answer

Changing Camshaft seal


1. Install the camshaft after lubricating the journal of the camshaft with engine oil. 2. Install the camshaft bearing caps.a0b9a5d.jpg
3. Install the ignition coil. 4. Install the rocker arm and rocker arm shaft. Refer to "Rocker Arms and Rocker Arm Shafts" section. 83e48db.jpg 5. Using special tools, Camshaft Oil Seal Installer (09221-21000), press fit the camshaft oil seal. Be sure to apply engine oil to the external surface of the oil seal. Insert the oil seal along the camshaft front end and install by driving the installer with a hammer until the oil seal is pulley seated. bda0592.jpg 6. Install the camshaft sprocket and tighten the bolts to the specified torque. 2cbbe98.jpg

May 05, 2009 | 1996 Hyundai Accent

4 Answers

Head bolts torque settings


According to my haynes manual for G-S reg, 1989-1998 it goes as follows,
Stage 1:- Tighten all bolts by hand until bolt heads just contact cyl. head.
Stage 2:-Tighten all bolts to 40Nm or 30lb ft.
Stage 3:-Angle tighten all bolts a further 60 degrees.
Stage 4:-Angle tighten all bolts again a further 60 degrees.
Stage 5:- M12 x 140mm bolts ONLY angle tighten a further 20 degrees.
Hope this helps everyone, sorry it seems longwinded but that is how it's written in the manual.

Oct 26, 2008 | 1995 Land Rover Discovery

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...