Question about Cars & Trucks

Open Question

Are there any accessories to connect e oxygen tanks to a walker?

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is Pulse Flow and how is it different from Continuous Flow ?


Pulse and continuous flow (or pulse dose and continuous flow dose) refer to how the oxygen is delivered to the patient. A pulse flow machine delivers oxygen only when the patient inhales and is triggered by inhaling. A continuous flow machine delivers a continuous flow of oxygen. Most continuous flow machines will deliver BOTH pulse and continuous flow. Here is oxygen tank process

pulse-flow-different-from-continuous-1ivx14mgtvlcvk4kwoptd5de-3-0.gif
Portable Oxygen Concentrators How They Work How To Choose Them

Dec 19, 2016 | Cars & Trucks

1 Answer

What is the most common cat oolitic converter that goes on the Avenger there is one on the manifold one at the base of the y pipe and one in midstream between Y pipe and muffler


Friend, your car has only one (1) catalytic converter. It may have one or two mufflers. Tenneco makes the Walker brand of mufflers and catalytic converters and have many for most cars. Check their online catalog to see it a system is available for your car. I would recommend you replace the one or two Oxygen sensors at the same time... poor gas mileage is often the result of failed Oxygen sensors. Most cars have two, some have only one. One may screw into the exhaust manifold (header pipe) and another after the catalytic converter. Good luck ;)

Apr 02, 2015 | Cars & Trucks

1 Answer

What is the part number for 02 oxygen sensor bank 1 sensor 3 on 1999 sts cadillac


OEM Part Number(s): 19178928, 25161131, 25312197 replacements: (1A AUTO)1AEOS00163 or Walker WKEOS00092-02

Bank 1 Sensor 3 ,Sensor number #3 is downstream (after) the Catalytic Converter. There are also 2 upstream sensors Left or Front
#1 and Right or Rear #2 upstream sensors.

Jul 03, 2014 | 2001 Cadillac DeVille

3 Answers

My 1997 Dodge Stratus, standard, 2.0L had been rattling as i would accelerate. Well this went on for a few weeks and everything seemed fine with the car. It wouldnt make any noise while in neutral, only as...


Any rattles that come from an engine are not a good thing. This is most likely a catastrophic failure of a component like connecting rod, piston, valve rocker etc. Time for a new engine .

Jun 19, 2017 | 1997 Dodge Stratus

2 Answers

P1684 - 1683 - 0135 - 0442 - 0455 error codes


P1684
It is not a fault code per say, it only indicates the battery has been disconnected or went dead in the last 50 drive cycles I believe.
P1683
This code refers to the cruise control speed servo power circuit is open or shorted. The power comes through a normally-on contact in the brake light switch. Use a test light or voltmeter to measure the voltage on the yellow wire / red stripe on the switch. If it's there, measure on the dark blue wire / red stripe. If it's missing there, the switch is defective. The voltage should go to 0 volts there when the pedal is pressed.
The rest of the fault codes are as follows.

P0135 - O2 Sensor Heater Circuit Malfunction Bank 1 Sensor 1
Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM) Help with thisTech notes The code means that there is a problem with the heater element circuit of the heated oxygen sensor. The control module monitors how long it take the sensor to warm up and start sending an adequate signal. The code is triggered when the sensor is taking too long to warm up. Water getting inside the heated oxygen sensor connector can caused the heated oxygen sensor fuse to blow. Before replacing the sensor, check for the condition of the heated oxygen sensor fuse and connectors. If the sensor and connector are OK, replacing the O2 Sensor 1 usually takes care of the problem.

P0442 CHRYSLER - Evaporative Emission Control Small Leak Detected.
Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0455 CHRYSLER - EVAP System Large Leak.Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking Tech notes The P0455 it's a very common code, because the code is set if the gas cap is loose or missing. Start by tighten the gas cap and clearing the code. In most cases the code can be clear by disconnecting the car battery for about 30 minutes.

Dec 04, 2012 | 2001 Chrysler Town & Country

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

2 Answers

I am being told I have to replace 3 catalytic converters and computer on my 2001 Toyota Sienna van to solve a check engine light on. I would think the codes would better pinppoint the issue. the quote on...


First, what are the codes?

Secondly, there are no codes that specifically indicate a failed catalytic converter issue.

A code relating to an oxygen sensor may not indicate a failed catalytic converter(s). It may be a defective oxygen sensor.

There are 3 catalytic converters on this model. One is connected directly to the right exhaust manifold, one is connected below the left exhaust manifold and one is connected under the vehicle before the two mufflers.

The last oxygen sensor (beyond the catalytic converter under the vehicle) is the one that compares the oxygen level in the combustion by-products for legal pollution requirements. It is screwed into the exhaust pipe and its wiring travels up into the vehicle through the floor and making a connection under the passenger front seat then to the computer for analysis.

A code relating to an oxygen sensor may indicate a failed oxygen sensor heater circuit in the oxygen sensor. This does not mean that the oxygen sensor is defective, only the oxygen sensor heater circuit.

If a catalytic converter is clogged, you should experience performance problems.

In addition to the check engine light being on, are you experiencing any performance problems?

Oct 21, 2010 | 2001 Toyota Sienna

1 Answer

Service engine light,code po 420


A good brand name direct fit converter should keep the light off as long as the cause of the first converter failure is corrected. I would not use a universal fit one. Walker is a good brand, I have used them and never had a problem. Here is some more information, hope this helps.

When diagnosing a PCM code or codes: P0420, P0430, be sure to determine the cause of the converter failure. These converters are not likely to fail without an external cause. Typical causes are: fuel pressure regulator leak, engine misfire, dirty fuel injectors, coolant consumption, etc. Also, be aware that some converters on the market will cause this code or codes due to a lack of oxygen storage capacity. A component that must be in these converters, Cerium, is required to store, then slowly release oxygen. NOTE: P0420 is a bank 1 converter code, P0430 is a bank 2 converter code. If the vehicle has only one converter, then P0430 does not apply.

Feb 19, 2009 | 2002 Pontiac Grand Prix

1 Answer

Need help


oxygen senson
alternator
throttle body fuel air mix housing u will find this connected off the air filter assembly
fuel filters improperly installed or clogged
3 of them one in engine compartment one on chassis by gas tank and one in the tank called the sending unit this has a filter on it
bad ignition coil
bad battery
bad computer settings

May 23, 2008 | 2002 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...