Question about 2004 Mitsubishi Endeavor

Open Question

How to check transmission fluid in mitsubishi endeavor?

Posted by Anonymous on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 243 Answers

SOURCE: Need a compatible transmission fluid

Basically you can use Dextron/ATF SPIII M but MMC recommends Diaqueen as it has been engineered for them and for warranty purposes as well.

Posted on Apr 23, 2009

  • 4336 Answers

SOURCE: I cannot locate Transmission filter on mitsubishi

Look inside the transmission pan.

Posted on May 08, 2011

  • 977 Answers

SOURCE: mitsubishi 2004 endeavor. Transmission appears to

if the fluid level is low it can cause problems with gear shifting, top up the fluid level & see if that makes a difference.......hope this helps......cheers.

Posted on Aug 01, 2011

  • 22 Answers

SOURCE: how many quarts transmision fluid does 2004 mitsubishi endeavor hold

I'm thinking about 3.5 quarts.

Posted on May 20, 2012

  • 22095 Answers

SOURCE: How do you read the transmission dipstick on a 2004 Mitsubishi Endeavor

Start engine and with handbrake on and brick behind the drive wheels put in reverse then check the level

Posted on Nov 18, 2012

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Oil pump

sounds to be a transmission problem. check the transmission fluid level

Jul 04, 2013 | 2004 Mitsubishi Endeavor

1 Answer

How do i change the transmission fluid and filter in a 2004 awd mitsubishi endeavor myself

I am not familiar with that modle, but generally i would raise the car and support it securly.
Then if there wasn't a drain plug, i would remove the pan from the transmission ,following instructions from a good service manual.
hope this helps

Dec 21, 2011 | 2004 Mitsubishi Endeavor

2 Answers

04 mitsubishi endeavor transmission slips goes in to gear but takes a sec to engage and then nuetral light flashes in drive and it wont shift past second gear

Hi Frank,

Your Mitsubishi transmission is a sophisticated piece of machinery, with multiple electronic components and advanced diagnostic capabilities. This means, your transmission is capable of telling you what the problem is, via the diagnostics process.

When the "N" light flashes, this is an indication that a fault has ocurred within your transmission, and to prevent further damage, the transmission is then placed into "Limp" mode , allowing the vehicle to be driven at low speed - just enough to get you to your home or service agent.

What the "N" light flashing means:

i) One flash per second (1Hz) - the computer has detected an internal malfunction. Further diagnostics is required to identify the suspected circuit or component.

ii) Two flashes per second (2Hz) - the trans fluid temperature is too high. Stop the vehicle, place gear into Neutral and leave engine idling for 2-5mins to allow fluid to cool. Chances are your fluid may not be of the incorrect type (must use Mitsubishi fluid only), incorrect level or the fluid is due for replacement.

Further diagnostics should be carried out by extracting trouble codes (DTC) from your vehicle's Powertrain Control Module (PCM). This process takes only a few minutes with the aid of the correct hand held scanner - I recommend this process be done only by a Mitsubishi franchise, as many garages claim they know what they're doing, when in reality, you end up spending unnecessary $'s, due to their lack of knowledge.

If problems in the transmission have been detected, one or more fault codes (DTC) between P0700 to P0999, should be stored in your PCM's memory.

NB: the correct diagnostics procedure will identify the problem very quickly. Do not waste your time taking to your local mechanic, who may not have the required diagnostic scanner.

Hope this helps........and Good Luck !

Nov 01, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Mitsubishi 2004 endeavor. Transmission appears to be jumping. The fluid level is low?

if the fluid level is low it can cause problems with gear shifting, top up the fluid level & see if that makes a difference.......hope this helps......cheers.

Aug 01, 2011 | 2004 Mitsubishi Endeavor

1 Answer

How can u check to see if u have enough transmision fluid ??

Does the truck have a transmission dip stick? Should look like the oil one, but be near the back of the engine and also be a different color. Once you find it, start the truck, put it in neutral and set the park brake, then check the fluid level.

Mar 15, 2010 | 2004 Mitsubishi Endeavor

2 Answers

2004 Mitsubishi endeavor on cold mornings has a delay shifting into gear. I have already replaced transmission once what is the problem?

let the car warm up for 5 to 10 min before takeing off
the trans fluid gets thick when it gets colder also have trans filter and fluid changed every 30,000 miles

Nov 17, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2-3 shift flair and bump

This can be caused by several problems, one dirty filter and fluid in the transmission the fluid gets trapped behind filter and causes a low fluid level That is where I would start before moving on to more serious problems.

Aug 11, 2009 | 2004 Mitsubishi Endeavor

3 Answers

I have a low speed shudder that is around 30-40 mph. I have had this occur in the past and changing the transmission fluid makes it go away. I have 160,000 miles on 2004 Endeavor that is just about 6 years...

DO NOT USE ANY OTHER FLUID OTHER THAN MITSUBISHI FLUID!!!! Any other fluid other than Mitsubishi fluid will blow the torque converter these transmission are very picky. Have a COMPLETE fluid tranny flush with Mitsubishi ATF Fluid. If your truck is an AWD that had a recall on the drive shaft, if you have an AWD and did not experience this before you have just been lucky and now had your luck run out at 160K. I would however put my money on the use of non-Mitsubishi transmission fluid.

Jul 13, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Need a compatible transmission fluid to the factory brand for a 2004 Mitsubishi Endeavor.

Basically you can use Dextron/ATF SPIII M but MMC recommends Diaqueen as it has been engineered for them and for warranty purposes as well.

Apr 21, 2009 | Mitsubishi Endeavor Cars & Trucks

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts


Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides