Question about 2007 Nissan 1400 Bakkie

Open Question

How to remove the window winder of a Nissan 1400?

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set tappets on Nissan 1400


With a special tool called a feeler gauge remove the valve covers and one by one bring the cylinders up to top dead center (both valves are fully closed at this point) adjust to factory spec. All adjustments are done cold. If engine is very high miles reduce the clearances in specs by slight amount (.002") to the tight side to account for wear in the valve train parts.

Nov 16, 2015 | 2006 Nissan 1400 Bakkie

1 Answer

How do you put a Nissan maxima 2010 window on track


remove the door latch and window winder handles , remove the arm rest ECT, remove the door lining and dust shield. any repairs can be done from there.

Jun 11, 2015 | 2010 Nissan Maxima

1 Answer

Location of nissan 1400 dashboard light. dashboard does not light and I need to fix the problem


Often necessary to remove the instrument cluster to access these bulbs, but have you checked the fuses?

Dec 12, 2014 | 2007 Nissan 1400 Bakkie

1 Answer

Hw to remove gearbox on nissan 1400


I would appreciate guidelines on removing the gearbox of a Nissan 1400, the gear lever intact??

Aug 06, 2013 | Cars & Trucks

1 Answer

How to fix a door latch on a 1994 nissan pickup


I just joined 10 minutes ago.........I think I can help you.

Use a spoon or wide screwdriver to pop the plastic rivets that hold the interior of the door on. Takes some courage as they dont come away easily, about 8 in all.
1, Remove the window winders, by either pushing the "ring" that touches the interior till it stops and then slide the winder off the toothed stub.pop the cover off and use screwdriver/socket to remove winders.
2, Use old eating knife or wide bladed screwdriver around edge if soft interior of door and pry/pop the hidden plastic rivets, releasing the soft interior away from the metal or the door.

3, You may have to twist off the latch, just like a bottle cap.

4, You will see the wire coat hanger type metal that connects to the latch and locking mechanism.


If you have some grease with you you can also grease up the mechanisms for the lock, lock release, window, mirror.

That's how it is on my Volkswagen.
Good luck, Dave

Apr 02, 2013 | 1994 Nissan Pickup

1 Answer

Hi. I am trying to dismantle my Landrover TDI 1997 Door panel and am having problems removing the window winder. Please help!


there should be a cap in the centre of the window winder, this cap once removed covers a bolt, to unscrew hold the window winder and unscrew bolt.

Oct 01, 2010 | 1997 Land Rover Defender 90

1 Answer

How do i remove door panel to get window runner


The panel is usually a pop button type retainers holding the panel on, Obviously all screws will have to be removed ie; grab handle, internal door opening lever, and the window winder,
TIP remove window winder handle with a shoe lace or a lenght of thin material , it's a horseshoe shaped spring clip holding the winder handle on and pulling the shoe lace or material in the opposite direction of clip will easily remove clip (don't loose ) Good luck

Apr 10, 2010 | 2003 Nissan Se R

1 Answer

How do I remove the window winder mechanism on the drivers side door? The window is stuck partly open and I can't seem to move it. Peter


The fault is with the regulator on the window. Remove winder and door handles. Remove door lining and reconnect window to winder rail. Reverse for reassembly

Mar 17, 2010 | 1999 Daewoo Nubira

1 Answer

Passenger side window goes down on it's own.


you need to replace the window winder unit. not the electronic switch but the motor/pully system which rolls the window up and down. if u can get the door panel off, you can replace it yourself for around $120, or you can macgyver a fix, without bying new parts. look for a loose cable on the winder unit, thats what will tell u that the winder unit is bad.

Nov 18, 2008 | 2006 Nissan Quest

3 Answers

Remove window winders for mk3 Golf


hi there, it will be one of two ways, either theres a little horse shoe shaped clip that sits inbetween the winder and the door panel, failing that then the middle of the winder should flick out and there will be a screw that screws through the winder and into the panel, hope this helps

Oct 24, 2008 | 1995 Volkswagen Golf

Not finding what you are looking for?
2007 Nissan 1400 Bakkie Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...