Question about 1998 Jeep Wrangler

Open Question

Why my throw out bearing keeps going out - 1998 Jeep Wrangler

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1994Dode stealth keeps dieng when I put on th brakes n my clutch throw out bearing is makeing a sqiulling sound when my clutch is disengaged all started at th same time it drives fine only dies when I...

engine dying when the foot is on the brakes indicates a faulty brake booster loosing vacuum
The throw out bearing will have to be replaced before it damages the pressure plate fingers.
replacing part of a clutch is a total waste of money as now you have to spend more money fixing what should have been replace d last time. Clutches should be replaced as a kit which includes the throw out bearing.

Feb 01, 2015 | Cars & Trucks

1 Answer

I have a 95 mustang and my throw out bearing is going out and im just wondering how long can i go before replacing?

You need to change it now. The bearings are gaulding and ti could take out the bellhousing and/or the transmission case, not to mention the throw-out arm.

Jan 24, 2015 | Cars & Trucks

1 Answer

2002 9.3 concertable. There is a noise going on when im driving. seems to go away when I change gears. then the noise is back. could it be transmission?

I want to say it sounds like your throw out bearing or pilot bearing when your going down the road when it makes the sound push in the clutch and when it go,s away keep the clutch pushed in and give it some gas and see if it still makes the sound if it dont then it is the throw out bearing or pilot bearing that is all part of a clutch kit sometimes the throw out bearing or pilot bearing gos out befor the clutch doe,s let me know what happens have a good day hope that helps

Oct 24, 2011 | 2002 Saab 9-5

2 Answers

Which side of the clutch does throw out bearing go on

The throw out bearing will be on the outside of the clutch assemble. What it does is push against the fingers in the center of the pressure plate.

Mar 08, 2011 | 1992 Acura Vigor

2 Answers

I have a 97 miata w/ 5 speed. When I push in the

Yes you most likely have a bad throw out bearing. If you replace the bearing you would do yourself a favor and replace the clutch and pressure plate while you are there.

Oct 07, 2009 | 1997 Mazda MX-5 Miata

1 Answer

Throw a rod

This is caused by a lack of oil to the rod bearing. Financially it will be cheaper to get a used engine and replace it as a whole. but if you desire, remove engine, turn upside down, remove oil pan, remove piston rod and bearing cap assy, inspect bearing, will be blue or locked and frozen/welded to the crank due to lack of lubrication. Keep me posted.

Dec 18, 2008 | 1998 Oldsmobile Bravada

Not finding what you are looking for?
1998 Jeep Wrangler Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides