Question about Cars & Trucks
My galloper rear door won't open, I can hear the central locking operate but can't open the door
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi this works on most voyagers disconect the possative terminal on the battery for ten minites excactly then reconnect and happy days your voyager centrol locking should work ok good luck
Posted on Feb 10, 2009
SOURCE: central locking wont stay open
Here's what I suspect is happening. The door locks will lock and unlock normally when the key is OUT of the ignition. If the key is IN the ignition, the doors cannot be locked (manually, key fob, or otherwise, if the system is operating as designed - prevents the doors being locked when the key is in the ignition). I've seen this problem before, but on a Santa Fe, not an Accent. The ground signal of the right hand front passenger door was lost, and the doors automatically locked. Perhaps something similar is happening in the circuit between the ETACS module and the right front passenger door lock/unlock actuator. Could be anywhere in the circuit.
These wiring diagrams may be helpful. The relays expecially may help solve this issue. As you can see, these relays are also controled by the ETACS module (Remote Keyless Entry).
Posted on Jun 20, 2009
the little metal rod that goes from the key part of the door lock to the electrical switch has come off ,no doubt the plastic clip that holds it has broken
Posted on Jun 21, 2009
If it makes a sound, but doesn't unlock / lock, then it's most likely the linkage has seperated. If it doesn't make a sound, it's most likely the actuator for the lock has broken. you'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to pull off the seal in order to see inside the door
Posted on Aug 19, 2009
Tips for a great answer:
Nov 23, 2015 | 2003 Mercedes-Benz C-Class
Apr 13, 2015 | 2001 Hyundai Santa Fe
Dec 16, 2013 | 2001 Honda Civic
Mar 23, 2013 | Volkswagen Golf Cars & Trucks
Nov 30, 2012 | Vauxhall Cars & Trucks
This will help.
Mar 01, 2012 | 2000 Hyundai Accent
Dec 01, 2009 | 2005 Chevrolet Silverado
Sep 09, 2009 | Hyundai Motor 2004 Sonata
Dec 13, 2008 | 2006 Pontiac GTO
58 people viewed this question
Usually answered in minutes!