Question about 2007 Fiat 124

Open Question

Battery light styays on when ignition off

By undoing the battery the light goes out and the immobiliser clicks. Can I disconnect the immobiliser completly and if so How? this problem is on a Fiat Ulysse 1.9turbo diesel 1998 reg

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22359 Answers

SOURCE: Fiesta Diesel (Y Reg) intermittent starting(flashing immobiliser)

diesel ,,,just bypass the immobiliser ,20mins work

Posted on Feb 18, 2009

Ad
  • 468 Answers

SOURCE: Light on dash of Fiat Ulysee coming on. It a

That light is telling you that your brakes are worn. There is a wire connected to the front brake pads, and when the brakes reach a certain point, they trigger the light. Sometimes the light is triggered prematurely if one of the wires breaks or gets disconnected. Either way, you should check your brakes. As for the Fiat lights being the same, you are mistaken with your particular vehicle. The Fiat Ulysse is actually made by Peugeot, and is identical to the Peugeot 806, the and the Citroen Evasion.

Posted on Oct 17, 2009

johnjohn2
  • 5763 Answers

SOURCE: i have a fiat ulysse and the power steering belt

yes, sounds like the pully is no good, may have bad bearings in pulley, replace it.

Posted on Jan 03, 2010

  • 1 Answer

SOURCE: Brake Pedal creeps down when held under pressure

bleed all ure brakes

Posted on Jan 11, 2010

SOURCE: VW Polo Immobiliser P Reg

I have the same problem with immobiliser in a 2007 golf, i have yet to figure out the problem:
Immobiliser will not allow me to sart the car but, if I let it Cool off , sometime sit between 5-120 min. it will start. i have tried succesfully the disconnect the battery for 30 min.
- it not the battery, given boost and no result
- it's not the alternator, it been tested
- Starters are effected by Temperature, i think it's the starter.
let me know what you guys think

Posted on Apr 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How can you bypass an antitheft system on a 2002 tdi jetta?


If it is not a new key fob, it sounds to me like the immobilizer is activated. So, all the lights on the dash are working now? Is there a flashing key on the dash lights? One of the resets that works is put the key fob in, and turn ignition on without starting it, and leave it 15 minutes. And try again.

Jul 25, 2014 | 2002 Volkswagen Jetta TDI

1 Answer

Mazda 6 immobiliser light flashing and car will not turn over


Immobilisers may intercept one of three circuits; typically the low-voltage ignition circuit and the fuel pump circuit. Some may also intercept the low-current starter motor circuit from the key switch to the relay. The Immobilisers can be set to intercept these circuits IF you use a key that has been copied or someone tried to start the car with the key for another car. Once activated, most of the time they are on a timer, meaning they will reset in 10 to 20 minutes. You can try and reset yours by disconnecting the battery, remove both cables and touch the two cables together for ten minutes. Now if you have a radio that needs codes to reset it be sure you have the codes before disconnecting the battery. Some Immobilisers use a magnetic switch to turn off the car. buy disconnecting the battery and touching the cables together you will kill the magnetic field and reset it. Hope this helps fixya up.

Mar 15, 2011 | 2006 Mazda 6

1 Answer

Engine will not start because immobiliser is active ,even when turned off,when key insered tthe hazerds flash and alrm sounds


disconnect the battery, behind the glove box is a white 4 pin socket, disconnect this, then turn key in ignition to the point just before ignition, reconnect the battery, then turn ignition on, engine should fire, the only problem is you will have to repeat each time you start, best way is to put an immobiliser switch in between the gegative battery terminal and set it on or under the dash, hope this helps

Oct 25, 2009 | 1996 Toyota RAV4

1 Answer

My petrol Peugeot 405 (1995) seems to be immobilised altho when I enter the code on the keypad the light goes green , turn the ignition it makes the immobilised noise and of course wont start. The battery...


Have you tried turning the alarm back on so that it goes off again, lock and unlock the car with your fob now, then enter the code. This is because it might still be in the standard immobiliser mode.

Sep 07, 2009 | 1991 Peugeot 405

1 Answer

Wont start


Hi
Had a similar problem with my x type 2.5 petrol, only had the car 1 day went to start it nothing happend all the lights came up on the dash but the engine wouldn't start and the immobiliser light stayed on. Spoke to Jaguar they had no idea and I couldn't get it to them. After disconnecting the battery trying to reset the immobiliser phoned and auto locksmith they came out and discovered the end of the key with the blade had lost it's coding and the immobiliser was not disarming, they reprogrammed the key and the car started no problem. As far as i know there is no way past the immobiliser. Hope this helps.

Aug 11, 2008 | 2002 Jaguar X-Type

2 Answers

How to restart engine immobiliser after disconnecting battery?


try resetting the computer with three separate ignition turns, yet dont actually engage the starter motor. just click the ignition to where it lights up your dash gauges, then click back to the off possition. try this three times

Jun 14, 2008 | 1999 Subaru Forester

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fiat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Fiat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...