Question about 2007 Kia K2700 Workhorse

Open Question

How do I remove headlight cover - 2007 Kia K2700 Workhorse

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 dodge dakato slt 3.9 how to remove headlight cover and side marker benzel


There are screws in plain site to remove the chrome trim

No cables involved ,just headlamp adjustment screws

Mar 04, 2014 | 1994 Dodge Dakota Club Cab

1 Answer

2001 avalon plastic headlight covers


The headlights are a sealed assembly; the plastic covers cannot be removed for cleaning. Although there are several methods for "defogging" the plastic lenses, there is no long-term satisfactory solution short of replacement

Feb 18, 2013 | Cars & Trucks

1 Answer

Illistration on how to change a headlight bulb


HEADLIGHT REMOVAL AND INSTALLATION
SEALED BEAM HEADLIGHTS REMOVAL 1 When replacing the headlight,do not turn the spring-loaded adjusting screws or the headlight aim will be changed 2. Remove the cover over the headlight this vehicle has five screws securing the cover other models may have four or six screws. 3. Remove the four screws which secure the retaining ring around the headlight support the headlight as this is done. 4. Pull the light away, unplug the connector and remove it from the vehicle. INSTALLATION 5. Position the new unit close enough to connect the wires. Make sure the numbers molded into the lens are at the top. 6. Install the retaining ring and mounting screws. 7. Install the plastic cover to the headlights with the screws you took off and check for proper operation. If the adjusting screws (spring - loaded adjusting screws) were not turned, the headlight should not require adjustment.

Jan 17, 2012 | 1993 Oldsmobile Cutlass Ciera

1 Answer

Remove headlight 2002 toyota mr2


Believe it or not, this is the headache to remove and replace the headlights:

Removal & Installation
  1. Remove the front bumper cover.
  2. Remove the tool box and the luggage compartment trim (carpet).
  3. Remove the 2 bolts and the nut.
  4. Disconnect the connectors, then remove the headlight

c17hydro_152.gif
  1. Front bumper cover removal-MR2



c17hydro_153.gif

To install:

  1. During installation, if the headlight is damaged, it can be reinstalled by installing new retainers.


c17hydro_154.gif

If the headlight is damaged, cut off these retainers



c17hydro_155.gif

Install new headlight retainers

Apr 19, 2011 | 2002 Toyota MR2 Spyder

1 Answer

HOW DO YOU CHANGE THE HEADLIGHTS ON A CADDILAC 2004 CTS


OPEN HOOD.REMOVE COVER TOP RADIATOR SUPPORT.REMOVE THE SCREWS NUTS AND PULL THE HEADLIGHT HOUSING OUT REMOVE BULB HOLDERS.THEN DISCONNECT THE ELECTRICAL CONNECTORS FROM HEADLIGHT HOUSING.REMOVE THE COVERS FOR ACCESS TO THE BULBS.YOU NEED TO WEAR CLEAN PAIR GLOVES YOU ARE HANDLING HALOGEN LIGHT BULBS OIL FROM YOUR FINGERS WILL CAUSE BULBS TO BLOW.NOW WITH CLEAN GLOVES ON HANDS ROTATE THE BULB HOLDER COUNTERCLOCKWISE. WITHOUT TOUCHING THE GLASS WITH YOUR BARE FINGERS.INSTALL NEW BULB AND HOLDER ASSEMBLY INTO THE HEADLIGHT HOUSING AND ROTATE CLOCKWISE TO LOCK IN PLACE.THEN PLACE THE HEADLIGHT HOUSING AND RADIATOR SUPPORT COVER THATS ALL TO IT.

Dec 25, 2010 | 2004 Cadillac CTS

1 Answer

How to change a headlight on a 2006 cadillac sts


To remove the headlight assembly you need to remove the front bumper cover. There are two bolts and one stud with a nut that hold the headlight in. Two of the fasteners are behind the bumper cover.If you remove these the headlight must come out.

Jul 08, 2010 | 2006 Cadillac STS

1 Answer

How do you remove a headlight 'assembly' (not the


You have to remove the front bumper cover. Put the car on jack stands (the front) and remove the inner fender plastic. You'll need a long extension and a 10mm socket to remove the nuts and bolts holding the bumper cover in place. Once the cover is off removal of the headlight becomes obvious.

May 15, 2010 | 2000 Ford Escort

1 Answer

Headlight swicht broke


Removal & Installation
  1. Disconnect the negative battery cable from the battery.
  2. Remove the lower steering column cover-to-instrument panel screws and the cover.
  3. Remove the instrument cluster trim plate-to-instrument cluster screws and the panel, then allow the panel to hang to the left side by the wiring.
  4. Disconnect the electrical connector from the rear of the headlight switch.
  5. Disengage and remove the headlight switch from the instrument cluster trim plate.
To install:
  1. Connect the electrical connector to the rear of the headlight switch.
  2. Engage and install the headlight switch in the instrument cluster trim plate.
  3. Install the instrument cluster trim plate-to-instrument cluster screws and the panel.
  4. Install the lower steering column cover-to-instrument panel screws and the cover.
  5. Connect the negative battery cable to the battery and check operation.

Apr 27, 2010 | 1995 Chevrolet Astro

1 Answer

How to remove the head light cover on a ford focus 2001


Headlight covers do not come off to remove the headlight asy, remove the headlight lower retaing bolt and remove the grill then the headlight asy.

Apr 07, 2010 | 2001 Ford Focus

2 Answers

Headlight repair on 2003 Mercedes Benz E320


how do you change left low beam bulb on 2003 mercedes e320

Mar 15, 2009 | 2003 Mercedes-Benz E-Class

Not finding what you are looking for?
2007 Kia K2700 Workhorse Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...