Question about 2006 Ford Freestyle SEL
Removing the clutch
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
J 6083 Snap Ring Pliers
Important: Remove the three adjustable dowels from the J37872 Compressor Clutch Holding Tool.
Install three 5/16 x 1 inch bolts in place of the dowels.
Remove and discard the compressor clutch plate bolt.
Use the J 37872 to hold the compressor clutch plate from turning.
Remove the compressor clutch plate from the compressor.
Remove the compressor pulley snap ring using the J 6083
Remove the compressor pulley from the compressor.
Remove the compressor clutch coil snap ring using the J 6083 .
Remove the compressor clutch coil from the compressor.
google J 37872 - to see tool !
Jan 31, 2016 | 2006 Chevrolet Chevrolet Impala LT
on Jan 13, 2010 | Hyundai Tiburon Cars & Trucks
Feb 07, 2015 | 2008 Scion Xb
Nov 17, 2012 | 1987 Toyota 4Runner
Jan 05, 2012 | Cars & Trucks
Hi:) For Ford Compressor Clutch Removel
Locate and remove the compressor clutch retaining bolt. Looking at the compressor clutch you will see a bolt in the center and three bolts along the outer edge. The center bolt is the retaining bolt. The three bolts around the edge of the clutch can only be accessed after removing the clutch, and are only relevant in clutch repair situations. To remove the retaining bolt you need to maintain the clutch position and relieve pressure from bolt head by applying the compressor clutch holding tool with your other hand, or have an assistant hold the tool in place. Do not lose the retaining bolt in case you need to reference it later.
Separate and remove the clutch from the shaft of the compressor. Once the retaining bolt is removed, as described in Step 1, simply pry the clutch away from the mounting surface using your hands. If the clutch is a little difficult to remove due to damage or decay then try using a screwdriver to lightly pry the rear side of the clutch away. Spray the area with an auto lubricant and allow it to sit overnight if needed. While removing the clutch do not lose clutch spacers.
Pull the snap ring from the clutch pulley using your snap ring pliers. You will now be able to remove the clutch pulley from the compressor. While everything is apart, and before installing your new compressor clutch, clean the area to remove dust or grime.
Reverse steps to install.
Mar 05, 2011 | 1998 Mercury Grand Marquis
Aug 08, 2009 | 2001 Ford Mustang
May 22, 2009 | 2002 Ford F250 Super Duty SuperCab
Mar 10, 2009 | 1994 Ford F150 Styleside Supercab
May 14, 2008 | 1999 Mitsubishi 3000GT
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: