Question about Cars & Trucks

1 Answer

My 1999 Chrysler circus Will not start and the key is stuck in the ignition checked all fuses they are good

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

  • Cars & Trucks Expert
  • 287 Answers

Not knowing all details I'll try a guess because the key is stuck, a possibility going off that, the key cylinder has a white metal extension going into the ign switch that may have broken off preventing the switch to turn far enough to kick starter in,(turn the key dash lights go out and starter doesn't turn over) if this be the case the column would have to be partially disassembled to access.

Posted on May 06, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Ignition will not turn

we had the same issue with ours a few weeks back, i was prepared to remove the key assembly. i started disassembling the steering column and removed all the trim, and while removing all the trim and the lighted key ring from the switch, i noticed a small pin on the side of the keysitch housing, if you put your key inot the switch and try to turn it, this pin moves in and out as the key is turned, ours wouldnt budge, or was stuck. i pressed it a few times with a small screwdriver, and sprayed it with some trusty wd40, and walla. it now works fine. would probably tak you about half hour to fix if you wanted to try what i did, if not then you may need to call a locksmith. i hope this helps, although you may have a different problem than we did.

Posted on Nov 17, 2008

lastech
  • 408 Answers

SOURCE: 1999 Mercedes Benz CLK Old and New Key will not turn ignition

hi,seem your esl or electronic steering lock mechanism is defect,since you replaced with key,ty

Posted on Mar 30, 2009

  • 363 Answers

SOURCE: 2001 chrysler sebring convertable key stuck in ignition -

Is the gear shift button stuck in, if so hit the gear shift a couple of time and that should unstick the botton, allowing you to remove your key

Posted on Jul 23, 2009

pepsiman1967
  • 216 Answers

SOURCE: What could cause a 40 amp ignition fuse to keep

There may be several issues causing you problem. One is that you have a bad connection either on the battery or on the starter or even a bad battery cable. I would suggest removing the battery cables, If it's side post a 5/16 wrench or socket. If it's a top post then it's likely to be 7/16 or 10mm. Using a terminal brushf009f91.jpg clean both the negative and positive terminals. But before reconnecting them, inspect the cables from the battery to their respective connection points. (The starter and the block) Make sure they do not have any broken insulation or dark discolorations in the insulation which represents excessive heat and a weak spot in the cable. Also check and clean the connecting points. Using a socket to remove the ground cable, once removed use a stiff wire brush to clean the surface of the block, then reconnect to the block. Then move to the starter, Using a 5/16 remove the solenoid wires and a 1/2 or 9/16 to remove the battery cable from the starter. Again use a wire brush to clean both surfaces and check the cable ends (eyelets) for a good connection. then reinstall the cables.
I am not sure how they tested your starter, however I have seen several auto parts stores use a diagnostic load machine that checks the starting system without the removal of the starter. If this was the test performed this is not an accurate test for a starter. The Starter will need to be removed, taking the positive cable loose from the battery, then remove the battery cable from the starter with a 1/2 or 9/16 generally socket and a 5/16 generally for the solenoid wire. Once the wires are removed you will have two 9/16(generally) bolts that can be removed with a socket and ratchet. Once the bolts are removed the starter will already be wanting to come out. Remove the starter and take it in to a reputable Auto parts store and ask them to perform a load test. This load test will give you the exact amp draw of the starter and solenoid and then they can tell you if it exceeds the manufactures spec.
Thanks, Dorrian


Posted on Aug 11, 2010

  • 1 Answer

SOURCE: Key is stuck in ignition and wont release. 1999

I have a 1999 honda accord. The problem that the key does not tturn - it's stuck and the shifter will not move. what is the solution.

Posted on Jun 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't pull the key out of the ignition of 1999 Chrysler circus help


Turn steering wheel (side to side) vigorously while moving key to position to remove it. It should remove now unless you tried putting key in upside down & it will require pliers to tug and remove.

May 06, 2014 | Cars & Trucks

2 Answers

Key stuck in ignition of 1999 Chrysler circus


If you can remove the cylinder. You can clean and lubricate the the tumblers and it will work like new. There is button usually on the bottom of the cylinder. Push it and the cylinder will release.

May 06, 2014 | Cars & Trucks

1 Answer

The key to my 1999 Chrysler circus is stuck in the ignition how do I get out


try spraying an aerosol lubricant down the ign key into switch barrel and gently pull if wont move have to strip out the cowling covering the ign switch and remove the ign switch to get the key out ,look on u-tube as there are numerous videos posted on this type of problem

May 06, 2014 | Cars & Trucks

1 Answer

The key is stuck bwill not come out of the ignition of my Chrysler circus


search u-tube for your particular vehicle/problem there will most likely be a video posted on how to overcome this problem ,better than me trying to explain procedure good luck

May 06, 2014 | Cars & Trucks

1 Answer

I have a 1999 Chrysler circus it will not start and the key is stuck in the ignition checked all fuse their all good tried to jump start it all lights come on but won't start


Battery is dead, replace battery and have proper amp to ignition and should be able to start and remove key, somewhere inside column there should be a switch that you should be able to press and remove key as well.

May 06, 2014 | Cars & Trucks

1 Answer

1999 Chrysler Town & Country


check battery connections ,clean them well and reattch, then let me know

Nov 30, 2013 | 1999 Chrysler Town & Country

1 Answer

My Oldsmobile 1999 bravada won't start, key is stuck in the ignition. It's not a smart key. The battery is good and it's not the starter. Is there a fusible link in this car, and if so, wh


Believe it or not, it is a smart key. passlock is standard on your vehicle. This link explains why it won't start.

http://vatspasslockpasskeysecurityhelp.yolasite.com/

Jun 05, 2012 | 1999 Oldsmobile Bravada

1 Answer

1999 chrysler concorde key wont come out of ignition


Some chrysler vehicle have a button in front of the ignition on the steering column that has to be pushed to remove the key other wise replced the ignition cylinder itself

Dec 31, 2011 | 1999 Chrysler Concorde

1 Answer

Unlock Instructions ignition for Chrysler 300M


This happened with my 2000 Ford Focus. To Unlock the ignition, put the car key in, and hit it gently with a hammer. The ignition tumbler will lock again when you take out the key, so have a hammer handy if you go somewhere :P.It happened to me on November 7th, the tow truck driver came, did this, and started the with no problems.

Nov 09, 2011 | 1999 Chrysler 300M

1 Answer

I have no ignition and it's stuck on start mode. can i just connect battery and pull starter fuse?


if the key is stuck in the ignition hold your foot on the brake with the car off put it in drive then back in park and the key should come out

May 02, 2009 | 1999 Chevrolet Cavalier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...