Question about 2003 Dodge Intrepid

3 Answers

Where is the tcm for 2002 dodge intrepid people say behind the driver side headlight but the dealer told me that was the pcm not for the trans. so what is the truth i know that the tcm i bought is smaller than the one thats behind the headlight but they say is the right one. so where else could it be

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I too have a 2002 dodge Intrepid, after 10 minutes of driving the car, when i make a stop it won't shift properly, in order to make it shift, i have to turn the ignition off and back up again!
If anyone can help me locate the TCM that would be great.
I'm ready to drive it off a cliff
Thanks in advance!

Posted on Apr 26, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 412 Answers

The tcm in a 2002 intrepid is the one behind the driver's headlamp..it is integrated into the powertrain controller..it is called a next generation controller(ngc) should have 4 electrical connectors..you CANNOT put a used controller in it's place..this controller is matched to your vehicles immobilizer system..let me know what problems you are having

Posted on Jun 22, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Is it the same for the 2003

Posted on Jan 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

42Le trans. will not shift out of ow gear need to locate TCM


If you are looking for the "TCM" it is pretty fair to assume that you have not yet scanned your computer network for fault codes. How do you know the problem is not being caused by something simple like a speed sensor? Just asking!

There is no "TCM" on a 2002 Dodge Intrepid. The transmission is controlled by the same computer module that controls the engine. It is called a "Powertrain Control Module" or "PCM".

Oct 11, 2011 | 2002 Dodge Intrepid

1 Answer

What do i need to replace to fix error code p0700 on a 2002 dodge intrepid


(DTC) CODE # P0700....Transmission Control System (MIL Request) Translation: Transmission Control Module (TCM) Malfunction or Failure. P0700 Information Code The Transaxle Control Module (TCM) monitors the malfunction of sensors and actuators relating to transaxle control. If any malfunction is detected, the TCM informs the PCM by sending a signal (P0700 code). P0700 means that a code has been set in the TCM. This code is for information ONLY. If this code is present, check for transaxle codes. So basically, the P0700 code is telling you to check the TCM for a transaxle DTC. The TCM can not turn on the check engine light so it has the PCM do it.

I hope this helps....let me know if I can assist further !!

Feb 21, 2011 | 2002 Dodge Intrepid

2 Answers

Location of transmission control module on 2002 300m possibly a picture


It is just behind the headlight on the driver side. However I belive 2002 was the first year that the transmission computer and the engine computer where just one computer.

Nov 16, 2010 | 2002 Chrysler 300M

1 Answer

P0700


P0700 means that the TCM (transmission control module) has detected a fault in the electronic control system of the transmission and has requested the PCM (powertrain control module) to turn on the check engine light to alert u to the fact that the transmission has malfunctioned, u must now get the the TCM tested to see what particular fault code(s) u have, these codes can't be read with a generic ODB2 scanner or code reader, u need a dealer to test the TCM, the OBD2 code reader can't do that.

Oct 17, 2010 | 2002 Dodge Intrepid

1 Answer

Where is the engine control module located on a 2002 Dodge Intrepid?


the powertrain control module which controls the engine, transmission, voltage regulation and cruise control is located just behind the driver side headlight under the hood

Apr 07, 2010 | 2002 Dodge Intrepid

1 Answer

2002 Dodge Grand Caravan I just put a master computer on. Is there a way that I can reset it? The engine runs fine so I know it works but it wont shift properly.


Hope you put a PCM in. TCM is in side the PCM. The TCM sometimes needs a brake in period. 200 miles. If not call the dealer to have then flash the PCM with the updates. Around $80 at the dealer. Tell them you want to FLASH to PCM for bump shifting. Any Chrysler, Jeep or Dodge dealer can do this in 1 hour. Thers a Chrysler TSB #2101807 Dated 10-27-07 about Transmission Reprogramming. If the dealer put the PCM take it back tell them about the TSB

Dec 24, 2009 | 2002 Dodge Caravan

1 Answer

Where is the PCM located on a 2002 chrysler sebring?


The PCM (Powertrain Control Module) is the aluminum box with fins that is behind the left headlight and toward the engine a bit. It's about 12" long 6" high and 2" thick and runs lenghwise from front to back. The box right behind the headlight that is about 6x6x2 and runs side to side, is the TCM ( Transmission control Module).

Oct 25, 2009 | 2002 Chrysler Sebring

1 Answer

2002 Dodge Intrepid- check engine light came on gave me trouble code PO700?


This code indicates an automatic transmission control problem. The presence of this code means that the transmission control module or TCM has detected a fault and relayed it to the PCM. It could be a TCM related solenoid has failed or is damaged or the TCM itself could be faulty. Best wishes.

Aug 18, 2009 | 2002 Dodge Intrepid

7 Answers

2002 Dodge Intrepid transmission not shifting


Flush out your transmission with the correct type fluid, Mopar ATF+4, and correct filter. Disconnect Negative cable, to reset computer, for at least 24 hours. Check grounding straps for PCM, ensure they are tight and clean.
This method worked on my 2003 Intrepid SE, 3.5L, Police Pkg car.
Good Luck!!

Jun 27, 2008 | 1997 Dodge Intrepid

Not finding what you are looking for?
2003 Dodge Intrepid Logo

Related Topics:

1,997 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...