Question about 2000 GMC New Sierra 1500

2 Answers

Replace outside door handle

How do you replace the outside door handle on the passenger side of a 1992 gmc pick up?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • GMC Master
  • 3,854 Answers

Your going to have to remove the inside door panel to get to the two screws that hold the door handle in place. Just make sure your windows are up so the window is not in the way to get to the two screws to un bolt the out side door handle. You can buy the replacement door handle from Auto Zone and buy extra door clips, since they always break. Auto Zone will have the step by step instructions to get the job done and it should take just under an hour, some band aids will be handy too. Good luck and hope this helps, keep me posted, be glad to help.

Posted on Jun 22, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

Carefully remove inside door panel and window crank if manual and make sure window is up then release linkage and unbolt and replace and carefully reinstall what you removed!!!!

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace inside door handle passenger side on a 2011 GMC Terrain?


Search Results

    How To Install Replace Inside Door Handle Chevy Equinox ...

    ? 9:02
    https://www.youtube.com/watch?v=cY6asyM2R6g
    Feb 2, 2012 - Uploaded by 1A Auto Parts
    How To Install Replace Inside Door Handle Chevy Equinox 05-09 1AAuto.com .... found your tutorial on fixing my driver's side door handle for my 2006 Equinox. .... Door Handles Chevy Equinox 2010 2011 2012 GMC Terrain ...

    How To Install Replace Inside Door Handle 2007-13 ...

    ? 9:05
    https://www.youtube.com/watch?v=QonKLwhk2CE
    Apr 2, 2015 - Uploaded by 1A Auto Parts
    http://www.1aauto.com/interior-door-handle-driver-side-front/i/1adhi00417 1A Auto shows you how to repair, install, fix,change or replace a broken or snappe... ... 10, 11, 12, 13 Chevy Silverado, Tahoe, Suburban and GMC Sierra, Yukon Denali ...2007-2011 Tahoe Yukon Suburban Escalade Vent Section ...Missing: terrain

    How To Install Remove Rear Outside Door Handle 2007-13 ...

    ? 10:02
    https://www.youtube.com/watch?v=7ZUTqqEzpZg



Feb 08, 2016 | GMC Cars & Trucks

1 Answer

How do I replace the door latch on my 1992 GMC Sierra 1500?


remove the inner door panel then disconnect the arms that run from the outside door handle, the inner door handle, the door lock mechanism, from each unit. then undo the 3 bolts/screws on the end of the door to remove the door latch assembly.

Apr 03, 2015 | 1992 GMC Sierra

1 Answer

Doors won't open from the outside and side door won't open from the inside. The window on the passenger side opens less then half the way and I have a slow oil leak


Junk it. LOL Just kidding.

Same thing happen to me, the latch push rod disconnected from the release latch and handle. You have to open up the door panel on the inside. There are 3 screws under the handle 1 visible and 2 not and 2 hidden in the door carpet on the panel.

Good luck.

Nov 04, 2010 | 1992 Pontiac Trans Sport

1 Answer

How do you remove the drivers side door handle on a 2000 GMC pick


Hi those are somtimes a pain ,I,m not sure which part your at on your job but once you release the linkage that is attached inside your door panel then you should be able to remove the nuts or screws that hold the door handle in from the inside then when you get the handle out from the truck then remove the lock ,also put some masking tape around the paint on the outside of the door ,because when remove the handle from the door and putting it back in you may have to angle the handle a bit for it to fit back into place ,sometimes a long pick with a 45degree tip on it helps alot when removing the inside linkage ,hope this helps ,let me know if I can help further!

Aug 08, 2009 | 1999 Chevrolet Silverado 1500

2 Answers

2000 GMC Sierra passenger door won't lock


The Actuator is not functioning anymore, check to see if there is a fuse for it first. If that is ok then remove the actuator and test it outside using some wire and your car battery to see if actually moves or doesent this will tell you if you need a replacement.

Jul 15, 2009 | 2000 GMC Sierra

1 Answer

1983 Cutlass Supreme passenger door wont open from outside


You will have to remove the door panel and inspect the door handle mechanism. I should'nt cost much more time then money. In my case I just have two screws to remove. One at the handle to open the door another at the handle to grab the door to close it. Then you pull the panel, its retained with clips. In your case I have no idea, all I can tell you is that you have to remove the panel to take a look and find out whats going on. Then you can let me know in order to help you further.

Jun 18, 2009 | 1992 Oldsmobile Cutlass Supreme

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

1 Answer

1992 chevy lumina door wont open at all


will it open from inside? If it will then you didn't hook up the linkage right on the outside handle

Apr 27, 2009 | Chevrolet Lumina Cars & Trucks

1 Answer

Passenger door


If the handle moves on the outside. It's probaly the plastic that conects the rod to the handle. pull the inside panel and look.

Dec 26, 2008 | 2003 GMC Yukon Denali

1 Answer

1992 Mazda MX-5 Door handle problem.


you will have to take the panel off to see why the inner lock/activator isnt working properly, besides youll have to take it off to fix it anyway.Maybe as simple as a bent handle to lock rod being bent and no longer long enough to activate lock correctly.youll just have to look and see.Let me know what you find

Oct 11, 2008 | 1992 Mazda MX-5

Not finding what you are looking for?
Cars & Trucks Logo

715 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...