Question about 2002 Nissan Altima

2 Answers

Nissan Altima 2002 2.5S. Driver side front window is moving slow or stopping completly, ither way Up and Down. Is it the window motor failing or may be the switch, contacts? Thanks Mark

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I doubt the motors going out if it's still responding with noise when you press the button I'm having the same issue and I did some investigation and found that the windows run on a pulley system with allot of moving parts including cable much like the one's on most bike's and some times this cable might fall into the wrong slot on the motor winding spool causing the cable to entangle and on some occasions break and cause a nasty mess of a tangle to contend with hope this helps and good luck .....

Posted on Aug 03, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 20 Answers

Sounds like it's the power window motor going out.

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Nissan Altima: Passenger side front power window will not go up or down. Passenger switch tested good but has no effect on window when connected. Was able to "hot wire" power window motor direct...


It can be either switch or any of the wiring in between. You have to follow a wiring diagram to test the circuit and this one is a bit complicated.

Aug 29, 2013 | 1994 Nissan Altima

1 Answer

2003 nissan altima driver side motor bad. How do you lower the window


If the power window motor does not work, you would have to disconnect the motor from the window regulator to move the glass up or down.

Feb 25, 2013 | 2003 Nissan Altima

1 Answer

1997 Nissan Altima Rear Driver side power Window.


Switch needs to be replaced. Its a common problem and isnt that difficult to replace. Once you get the door panel off, its pretty much unplug the old one and plug those wires into the new one

Apr 13, 2009 | 1993 Nissan Altima

1 Answer

1995 camaro just bought the car driver side


sounds like nu window motor replacement time if you get voltage to motor ( test light ) its motor

Apr 12, 2009 | 1995 Chevrolet Camaro

3 Answers

2002 Nissan Altima windows roll down by themselves w/no key in


You need a body control computer, which controls the windows, door locks and other items. The new computer will have to be programed by a good imports shop or Nissan dealer.

Apr 12, 2009 | 2002 Nissan Altima

2 Answers

2002 Nissan Xterra drivers power window wont roll down


Quite possibly yes...I would first check any relays and/or fuses just in case.  A few dollars for a fuse or relay is much cheeper than say $100.00 and a few hours of labor.  
You can purchase just the window motors from any major auto parts stores.  You can also purchase the window motor with the regulator.  The regulator is kind of like a rope and pulley system to lift the window up and down and the motor is attached to this assembly.  It is a little more expensive but I would change both.  I always change both just in case the regulator is bad and it isn't the motor.  You will have to remove the plastic interior of the door in order to change either the motor or the motor/regulator assembly.

Any questions, feel free to ask!

Feb 04, 2009 | 2002 Nissan Xterra

Not finding what you are looking for?
2002 Nissan Altima Logo

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...