Question about 1999 Dodge Durango

1 Answer

I have a 99 durango My breaks grab and stop hard squilling the tires first thing in the morning. After it has been driven a while breaks act normal.

Posted by on

  • adrienne0119 Jun 22, 2009

    Not sure what kind of breaks they are. I'm just a girl and want to be informed when I take it to the shop.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

Are they bimetalic brake pads?????
if so go get non metalic pads and see the difference:)

Posted on Jun 22, 2009

  • jrnbudd Jun 22, 2009

    are they bimetalic brake pads?????

    if so go get non metalic pads and see the difference:)

  • jrnbudd Jun 22, 2009

    i had tat problem with my chevy van i changed the brakes from metallic do regular brakepads it solved the problem:)



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2001 Durango lunging and shutting off at stop

Is it an automatic transmission acting like a manual transmission that you forgot to push the clutch in when you come to a stop?

If so, you probably have a torque converter lock-up solenoid sticking.
You should scan your transmission control module for fault codes first. However, many times these things stick and never set a code.

It is located inside the transmission pan. It is not very hard to change. Just remove the transmission pan and you will see it screwed to the valve body. (If you are like most folks, You are probably due for a fluid and filter change anyway.) You will need a filter kit, about 11 quarts of transmission fluid, and a solenoid assembly. (Also see picture below)

If this is not the type of problem you are having, please post a comment to let me know.


Jan 05, 2012 | 2001 Dodge Durango

2 Answers

My 99 dodge durango makes a "rubbing" sound when

it might be because of the tires rubbing against the fender, as you speed up the tires expand so the can rub against the sides of the fender.

or it might be a simple brake problem, u can try getting your brakes serviced

Oct 21, 2011 | 1999 Dodge Durango

1 Answer

I have a 1988 c1500 chevy truck and my break lights stop working and notice the stop light fuse was missing just bought truck back from previous owner but when I replace the fuse the break light stays on...

The brake light switch on these trucks was a poor design. Its mounted on the brake pedal. Look under there and bend the bracket that holds the brake light switch slightly and things will start working again. When these were new we used to just grab the brake pedal and pull it toward the drivers seat really hard and let go. This fixed your problem 99% of the time.

May 13, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

99 durango 5.9 how do you seperate the power steering pump from reservoir removed bolts on back of reservoir but wont budge dont want to damage reservoir

these things are made of plastic and over time and in cold weather expands and usually breaks but if possible warm up the parts so it will become more flexible and grab a tie rod seperator and carefully pry or something that suits you to pry with .

Feb 28, 2011 | 1999 Dodge Durango

1 Answer

Front right side grinding sound

Possibly a wheel bearing. Get the wheel on that side off of the ground safely, and then grab the tire at the 12 and 6 o'clock positions and try to rock it back and forth.

If there is more than just a little movement, you need either ball joints or a wheel bearing.

Apr 18, 2010 | 2000 Dodge Durango

2 Answers

Why is oil leaking on tire

Check the transmission oil bottle or the brake oil container.

Aug 15, 2009 | 1997 Honda Civic

1 Answer

Front end on my 2001 durango, clunks, squeahs with wheels turned

You have a break caliper tied up and or the break hoses are bad and not leting the fluid flow back to the resavor. I just got done with my wifes 2001 Durango. New rotors, calipers, pads, and front break hoses, This makes 3 times in the last 3 years i had to put calipers on it. This time i put break hoses on to, was told by reliable sourses thats what the problem is break hoses i took no chanses i did the whole thing.

Apr 11, 2009 | 2001 Dodge Durango

1 Answer

1996 GMC Jimmy Stopping Problems

sounds like your abs isnt working right. The pulling to the right could be the alignment out, brake pads more worn out on one side then the other or a rotor grabbing better than the other. If I was you I would get the alignment checked along with replacing brake pads and rotors and maybe disconnecting the abs, thats what I did to mine and have no problems anymore.

Jul 24, 2008 | 1996 GMC Jimmy

1 Answer

Dodge durango 99

Bad fuel pressure check valve comes to mind...accordianman

Jul 23, 2008 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides