2006 Suzuki Forenza Logo

Related Topics:

A
Anonymous Posted on May 03, 2014

How do you remove thermostat housing on 2008 suzuki forenza

5 Related Answers

Anonymous

  • 43 Answers
  • Posted on Dec 16, 2008

SOURCE: my thermostat housing on 2007

Yes you must change it or have seals checked.

Ad

Anonymous

  • 112 Answers
  • Posted on Jan 20, 2009

SOURCE: suzuki forenza thermostat 2004, 56000m

yas you can, drain the cooling system,disconnect the radiator hose at the thermostat housing cover , undo the two bolts and lift off the thermostat housing cover and gasket, withdraw the thermostat from housing, ri-fitting is the reverse sequence to removal , but use a new cover gasket and ensure that the thermostat is fitted with the jiggle pin uppermost . fill the cooling system .

Anonymous

  • 33 Answers
  • Posted on Aug 12, 2009

SOURCE: I NEED AN OWNERS MANUAL FOR A 2008 SUZUKI FORENZA

Go to a Suzuki dealer and they can order one for you, or call Suzuki customer service at 1-800-934-0934, don

Anonymous

  • 603 Answers
  • Posted on Jan 05, 2010

SOURCE: power steering light on 2006 suzuki forenza

Power steering light?? Maybe it's something else.

oneStan

oneStan

  • 617 Answers
  • Posted on Feb 18, 2010

SOURCE: Radiator flush for my suzuki forenza.

For the do-it-yourself kind of mechanic, there is a kit sold by Prestone that will help you back flush the system using an ordinary garden hose. Available at most any auto-parts store, Walmart & such. It has the basic instructions on the container but I'll give you an overview.

You will need a large container to catch the anti-freeze coming out, You could drain it by removing the plug at the bottom of the radiator first , or remove the lower hose & get most of it out & then just flush the remainder, back-flushing is recommended.

There is a piece that fits into the radiator caps position that helps to aim the water towards a container but sometimes you can't use it due to size restrictions & limitations on space & have to catch the fluid with a drain pan as it overflows.

You will need to install a backflush connector "T". You simply cut into one of the 2 heater hoses, preferably the return line, and install that piece using 2 hose clamps to secure it. The garden hose hooks there.

The engine should be cool, you can crack a head or block by drowning a hot engine with ice cold water.

Just turn the water on slowly, once the anti-freeze stops coming out & it's just water, remove the drain pan & recycle what anti-freeze you can. Remember, most anti-freeze is fatal to birds & animals, including large dogs & children, so clean spills or at least dilute it with water until it is not a threat.

once done, drain the system & refill with the mix you prefer for your area, usually not less than a 50/50.

good luck.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I add water and coolant to a 2006 Suzuki Forenza and get the air block out without busting the head?

Coolant Bleed Screw? - Suzuki Forums: Suzuki Forum Site

www.suzuki-forums.com/1g-1999.../41656-coolant-bleed-screw.html

Nov 2, 2010 - 6 posts - ‎4 authors
... thermostat. It appears I have air pockets still trapped and they are. ... There is always the (often maligned) radiator / block SEALER. I'm not a ... engine over heating
10 posts
Mar 21, 2012
coolant coming from vent tube every drive - out of ideas
10 posts
Dec 8, 2011
Engine block coolant drain plug?
10 posts
Jun 17, 2010
Missing coolant mystery (2005 Forenza)
9 posts
Apr 19, 2010
More results from www.suzuki-forums.com

Subaru Coolant Antifreeze Change & How To Bleed The Air ...




0helpful
1answer

How to remove the door panel from that Suzuki Forenza 2008

it can be many things, not just a bad motor
but you can hot wire it to test it, or check for 12v at it to see if its bad.
also the window can jam.

the FSM is only 4 bucks to view. why not just RTM?

https://suzukipitstopplus.com/Products/1035-2008-forenza-reno-service-manual.aspx

see body and door sections, how to remove door cars, (skins)
0helpful
1answer

Thermostat for suzuki forenza 2007

old post, . but
same as all cars, in the engine
the J20B engine.
see that large radiator hose.
there are 2, one gets hot first, that hose. is it.
ill answer for USA cars. only. (unless you tell yours)
on this car its the upper hose.
and goes to the thermostat housing.



J20
24538734-z5przjt5apveussryj2qq3m0-4-0.jpg
real... j20b. see X? its there.
24538734-z5przjt5apveussryj2qq3m0-4-1.jpg
4helpful
2answers

2007 Suzuki forenza, where is the thermostat located?

The thermostat is located at the top of motor where top radiator hose is it is not just the thermostat it is also the housing it comes as one unit. Not an expensive part and easy to replace just two bolts.
0helpful
1answer

I have a 2006 suzuki forenza. i parked in front of my house. When i went to drive it again it wouldn't come out of park. How do i fix this?

apply the brakes ,, HARD ,, it could simply be that the safety switch is preventing you from shifting gears ,, pump the brake pedal a few times then try ,
0helpful
1answer

How do i change thermostat on susuki forenza

he whole housing that the upper radiator hose connects to is changed.
Remove the radiator hose, remove the 2 Torx bolts, remove the housing, reverse to install and top off coolant.
1helpful
1answer

Is the thermostat located at the end of the upper radiator hose on a 2005 Suzuki Forenza?

Hi!!

It sounds about right, but you need to remove the thermostat housing, (the part where the hose goes into), to remove the thermostat.

Don't forget to rate this post. Good Luck!!
0helpful
1answer

Suzuki forenza thermostat 2004, 56000m

yas you can, drain the cooling system,disconnect the radiator hose at the thermostat housing cover , undo the two bolts and lift off the thermostat housing cover and gasket, withdraw the thermostat from housing, ri-fitting is the reverse sequence to removal , but use a new cover gasket and ensure that the thermostat is fitted with the jiggle pin uppermost . fill the cooling system .
Not finding what you are looking for?

516 views

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...