Question about GMC Acadia

1 Answer

I have a 2008 Acadia. Once in a while when i turn the wheel around bends it makes a grinding noise & seems like the steering shuts down. It only lasts a few seconds and returns to normal.

Posted by on

  • Arnold May 11, 2010

    Does it happen more often when it rains? Found TSB 07-02-32-010 which says steering maybe difficuit when water gets on the belts and causes them so slip. hope this helps

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 208 Answers

Ball joints and or wheel bearings ppossibly . jack the vehicle up off the groungd physically try to move the tire up and down and side to side feeling for any loosness in the wheel. do this on both sides:-) good luck

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering wheel column noise


Steering Wheels & Grinding Noises (with Pictures) ' eHow

www.ehow.com > Cars
The typical cause of grinding noises when turning the steering wheel is low power... Worn bearings inside the steering column may create a grinding noise, but .

Sep 12, 2015 | Cars & Trucks

1 Answer

HARD TO TURN MY WHEEL WHAT DOES THAT MEAN WITH MY 2008 GMC ACADIA


You likely are low or out of power steering fluid. Or you power steering pump has failed.

Aug 26, 2014 | 2008 GMC Acadia

1 Answer

My steering wheels gets hard when i turn or reverse in my 2008 gmc acadia what does that mean


This just means the drive belt to the power steering pump is loose. Tighten the belt and you'll be good to go.

Aug 26, 2014 | 2008 GMC Acadia

1 Answer

How to oil Steering Shaft on Chrysler town & country


Are you certain the grinding is coming from the sterring shaft, or is it simply transmitted through the shaft from the sterring box? Grinding of this critical aspect of controlling your vehicle is tremendously dangerous. If the noise happens when turning the sterring wheel, there is something critically wrong-get the vehilce to a shop ASAP.

Jul 16, 2014 | 2003 Chrysler Town & Country

1 Answer

2003 GMC Yukon- when driving I have a weird grinding noise in lower speeds and then again when driving around 50-60 mph. it does seem to affect the steering wheel as well. Now when turning left the I get...


It sounds like a wheel bearing is going bad. They are easy to change. If you have a place to jack the vehicle up. Try spinning the front wheels. You should hear a scraping noise as the wheel turns.Also replace both sides at the same time,as the otherside is not far behind.

Oct 01, 2017 | 2002 GMC Yukon XL

1 Answer

I hear a loud grinding noise when i drive my car


Check front tyres & wheel bearings espesially the R/H/F. Feel tyre for high / low spots on inside & jack up & spin wheel if you get noise while jacked up it is not the tyres but wheel bearing or brake pads but more than likly a crook bearing by the sound of it. It needs to be tended to ASAP

Jun 28, 2012 | 2004 Volkswagen Passat

1 Answer

Steering wheel making a grinding noise when you


The bearings are going bad in your colum

Mar 11, 2010 | 1998 Dodge Caravan

1 Answer

Peugeot 205 diesel - grinding noise on full lock.


may be the slip joint in the steering column is slipping in a rotational way stick your head under the dash and turn the wheel and watch the slip joint in the column if the lower part stops but the top part keeps moving get a new/ second hand stearing collum

Oct 02, 2009 | 2001 Daewoo Nubira

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...