Question about 2003 Dodge Intrepid

2 Answers

2003 Chrysler Intrepid Sensor reads P0700

2003 Chrysler Intrepid Sensor reads P0700 problem
It runs fine now had 1 problem where it reved high, wouldnt swith into 3 gear.

Is it something I can fix on my own?

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

P0700 is a code in the engine computer telling you that you have codes in the transmission computer. You need to have the transmission computer scanned.

Posted on Jun 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The code you are showing is likely pointing to the Solenoid Pack that is located in the valve body of the transmission. If you attempt the repair yourself (which can be done), plan on about 4 hours of your time being invested. You can buy "remanufactured" solenoid packs on eBay for about $80-$100, while new is $200+. A ****** shop will charge $600 all-in for the job which includes the part. Doing it wyourself will save you over $300. This is a common error on higher mileage Intrepids.Happened to mine where it would drop into "limp mode", replaced the solenoid pack and everything works again. Engine light is off too! Just Google "solenoid pack replacement 42LE transmission" and you'll find all the info you need. You could try "solenoid pack replacement Intrepid" as well.
Enjoy the savings!

Posted on Jan 24, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2003 saturn vue codes p0700 what is this

code p0700 refers to transmission control system /MIL--malfunction===causes --wiring --- transmission control module (TCM)

Dec 18, 2013 | Saturn Cars & Trucks

1 Answer

Holden/Chev Cruze 2003 clonking out

run fault codes to check that you got the right sensor replaced

Nov 06, 2013 | Cars & Trucks

2 Answers

Engine code p0700, p0871 and p0760

The P0700 means Transmission Control System (MIL Request)
The P0760 means Shift Solenoid "C"
The P0871 means Transmission Fluid Pressure Sensor/Switch "C" Circuit Range/Performance.
spare transponder key

Oct 05, 2012 | 2003 Dodge Intrepid

1 Answer

P0010 p0456 p013 p0700

The P0010 means "A" camshaft position actuator circuit(bank1)
p0456 means evaporative emission control system leak detected (very small leak)
p0130 means O2 sensor circuit (bank 1 sensor 1)
p0700 means transmission control system (MIL request)
ecu remap mpps

Aug 07, 2012 | 2010 Chrysler Sebring

1 Answer

Error code 0700 for Chrysler Intrepid

The P0700 means "Transmission Control System (MIL Request)"

Jul 30, 2012 | Dodge Intrepid Cars & Trucks

1 Answer

How to read TCM codes with OBD scanner?

Really that is all you need unless you want to spend $200 on a better scanner. Post that code on line and you will get the problem and fix suggestions. Or purchase a repair manual (Haynes) which has the codes and sensors listed but leaves the repair solutions to you. Remember that a code can be caused by more than just a bad sensor so be careful.

Dec 21, 2011 | 2003 Dodge Intrepid

1 Answer

I recently changed the engine of my Chrysler Intrepid 2001 2.7 V6 with a Chrysler Intrepid 2003 2.7 V6 engine. The engine runs fine except that the 2001 engine had an EGR sensor but the 2003 does not ....

you can talk to someone a the dealer(service manager/tech)to see if they can reprogram the pcm so it recognizes there is no egr on this motor

Sep 08, 2011 | 2001 Dodge Intrepid

1 Answer

Engine code reads P1776 1/2 and P0700 transmission

P0700-This Relates to MIL"Malfunction Indicator Lamp")( Request - Control System for Transmission
unable to locate description for P1776,can you get all systems scanned for codes again as 0700 just indicates that a fault has occurred that has lit the check light and logged at the ECU.
Obviously it will be related to the shift fault,maybe a speed sensor or a dirty fluid fault.
Get back to me with any extra info.

Apr 10, 2011 | 1998 Chrysler Town & Country

1 Answer

Camshaft Position Sensor

P0340 Camshaft Position Sensor "A" Circuit Bank 1 or Single Sensor

P0700 Transmission Control System (MIL Request)

The code P1684 is real easy. The computer is stating that the battery has been disconnected within the last 50 starts.

Jun 24, 2009 | 2000 Dodge Intrepid

Not finding what you are looking for?
2003 Dodge Intrepid Logo

1,153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides