Question about 2005 Chevrolet Equinox

2 Answers

Does a 2008 come with a towing electical hook up and if so where is hook up located?

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

If you mean, where do you connect the aftermarket trailer wiring? The factory female connector is normally located in the spare tire compartment. It should be noted in your Owners Manual.

Posted on Aug 18, 2009

Testimonial: "Thanks, found it where the jack is. Easy hook up if you have allthe fuse hook ups "

  • bhe1694039 Aug 19, 2009

    Another place to look for the connection is by opening the car jack compartment and it may be behind the jack which you'll have to remove to get to it. I think? you can then feed the connector down into the tire compartment. If this doesn't help you, then check with a U-Haul place and they can surely tell you.


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 365 Answers

No it doesn't... Google "Hoppy" for aftermarket kit.
Good Luck

Posted on Jun 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do I hook up a tow rope on rear of fiero gt 1987 I just need to pull it back about 6 or 7 ft.

Search Results

    Pontiac Fiero Tow Hooks at Andy's Auto Sport > ... > Pontiac Tow Hooks > Fiero Parts
    At Andy's Auto Sport, you can find Pontiac Fiero Tow Hooks at a great price. ... a ditch most tow truck drivers will hook up to a suspension piece or bumper risking ... Bolting a set of Pontiac Fiero tow hooks to the front and rear of your vehicle will ... Tow hooks provide a convenient and secure place to attach a tow rope or tow ...

    How to tow a Fiero with a pickup truck? - Pennock's Fiero Forum

    Mar 3, 2010 - 40 posts - ‎9 authors
    OK, I have to go pick up a Fiero from Miami this weekend with my ... a strong rope. and someone inside the fiero pushing the brake pedal :P ... Went a tow dolley and towit by its back wheels and brace the ... any good tow points under the car, unless youhook it up to an a arm, .... 1987 Pontiac Fiero SE / V6 Hookup for raising car for engine cradle removal
    40 posts
    Feb 6, 2009
    U-Haul says "no" to using a tow dolly?!!
    40 posts
    Oct 31, 2008
    More results from

    What to do when your car has no tow hook - NWautos
    Mar 13, 2011 - I know most SUVs have a hook on the front or a hitch on the back, but I cannot seem to find anything ... Where can I safely hook up a tow rope?Missing: fiero ‎1987

Dec 17, 2015 | Cars & Trucks

1 Answer

I need to tow a broken down 1996 Grand Cherokee. I don't believe it has tow hooks. What is the best way to flat tow it about 5 miles?

THE BEST WAY is to locate 2 or more points that seem sturdy. nothing plastic. your best bet is hooking the cables up to something underneath the car that is attached to the frame if not the frame itself. Remember that you want to do it right in the middle of the car or 2 points on seperate ends to have an even nice pull

May 02, 2011 | 1996 Jeep Grand Cherokee

1 Answer

When I hook my travel trailer seven pin plug to my 2008 Nissan truck seven pin receptical, all lights work but the running lgts on my T.T; I think a fuse is blown, but I cannot find a blown fuse in the...

The fuse for the trailer tail lights is #36, a 10 amp fuse located in the IPDM/ER. That is the plastic box back of the battery. This will be the problem Tim

Apr 17, 2011 | Nissan Titan Cars & Trucks

1 Answer

Where are tow hook spots on chassis for flat bed tow truck on 1994 bmw 740il

There is a small plastic cover on the front bumper cover, pry it out then install the tow screw thats located under the tool cover on the back of the trunk lid.

Dec 14, 2010 | 1994 BMW 7 Series

1 Answer

I have a 2008 nissan Titan. I have the Delphi harnass hooked up but when I plug in the harnass to the trailer I have running lights only. No brakes or turn signals. Do I need to do something with the blue...

Check for the tow relays in the under hood fuse box. Black box behind the battery on the passenger side. Do a web search for 'titan tow relay' for more info.

Mar 20, 2010 | 2008 Nissan Titan

1 Answer

Looking for front tow hooks

Front bumper tow hooks are large, easily visible hooks that are attached to the exterior of the vehicle's bumper.
Primary Benefit: Tow hooks can be used as a point of attachment for chains or straps to extract a stuck vehicle.

Check here for parts:
- tow_hooks
- tow+hook

Good luck.

Feb 24, 2010 | 2008 Isuzu I 370

1 Answer

How to hook up a brake controller for towing

Attached below is diagram illustrating how to hardwire a brake controller into any vehicle. Your Durango should have a blue controller plug that is installed at the factory and that is located under the dash to the left of the steering column. If you have this plug, you would be able to purchase a harness that will mate with that plug and would take a lot of the guess work out. 4f1c91b.jpg

Dec 30, 2009 | 2008 Dodge Durango

1 Answer

Front bumper damaged.

It's pretty easy to remove the front bumper.

  1. Remove the plastic "air dam" below the bumper by unscrewing and then popping out the four plastic connectors underneath, then two on the sides.
  2. If you have fog lights, disconnect them by reaching up and behind the bumper.
  3. Using an 18mm socket, remove the nuts that hold the bumper to the frame. They will be located immediately behind the tow hooks, if you have them, or the small bumps where the tow hooks would protrude.
  4. Slide the bumper off.
Here's a link to a writeup for installing an aftermarket bumper, but steps 1-11 explain how to remove the factory one, and it includes pictures.

May 06, 2009 | 2008 Jeep Wrangler

1 Answer

Tow Hook

there hook is on the frame rails on each side/ Please rate my response thank you very much

Feb 01, 2009 | 2008 Mazda B Series Pickup

Not finding what you are looking for?
2005 Chevrolet Equinox Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides