I have 1999 Acura CL that shows two codes 1519 and 1259. When I reach 4000 rpm the car sputters as the V-Tec is not engaging. I've replaced the map sensor and idoler air valve but no luck. Can anyone tell me what might be wrong?
Go to Advance Auto Parts and buy a can of "SeaFoam" $8...add to your fuel tank as directed and drive for at least 100 miles...If this doesn't work, you need to replace all of the O2 sensors in the exhaust system. Good Luck
2001, 1.8L VTECH , DOHV in a Acura Integra. What is the type of head bolts are retaining the head to...
(More)
2001, 1.8L VTECH , DOHV in a Acura Integra. What is the type of head bolts are retaining the head to the block.
In removing the head there are two large allen head bolts and eight other head bolts.It looks like a...
(More)
In removing the head there are two large allen head bolts and eight other head bolts.It looks like a small allen head bolt with a totx nut lower down the bolt, is this true and what is the method to remove the eight bolts?
01' integra gsr.. stalled it today on a normal first gear take of... it stalled again immediately on...
(More)
01' integra gsr.. stalled it today on a normal first gear take of... it stalled again immediately on an even more soft first gear start.. now everytime i get on the gas for a normal start it cuts out in first. i shift to second it does it a little. and i was cruizing in 3rd, let off the gas and got on it and it keeps cutting out for a second.. i didnt try fourth or fifth