I have look at all fuse to make sure there is no Bad ones front and back fuse box all OK what is the salutation ? also the Bluetooth i cant get my phone to pair with my BMW car as well Thanks
Do you have NAV option? If not, you may be able to reset radio by removing all three fuses, one in glove box and others in rear panel right pass side, then put them back in, and this resets radio default which clears up issue in most cases. If you don't want to pull fuses, you can also disconnect battery, but be careful. With NAV, it gets more complicated. CeraCoat-NanoTech.com
SOURCE: 95 BMW 318is fuse box
hello, for your vehicle the fuses for the front power windows are 14 and 19. Both fuses should be 30amp fuses.
SOURCE: passkey of the bluetooth
I HAD THIS SAME ISSUE. I TOOK OUT THE REAR PANELS INSIDE THE TRUNK. FIRST, START WITH THE LOWER CENTER PANEL RIGHT WHERE THE LOCKING LATCH IS LOCATED. THEN, MOVE TO THE LEFT PANELS ON THE SIDES OF THE INSIDE OF THE TRUNK. ONCE YOU HAVE TAKEN OUT THE PANELS, THERE'S A SILVER BOX IN THE TRUNK WITH A "PK 0000" NUMBER PRINTED ON A STICKER. THAT "PK" NUMBER IS YOUR CODE.
IT'S NOT AS BAD AS YOU MIGHT THINK TO TAKE OUT THE PANELS, I DID IT IN ABOUT 15 MINUTES. JUST TAKE YOUR TIME AND THEY ALL GO BACK IN AS EASY AS THEY CAME OUT. JUST TRY NOT TO FORCE ANYTHING BACK IN IT'S PLACE.
HOPE THIS HELPS.
LEONARD-
SOURCE: Hello, I have a E53 2002 BMW X5, i cannot get the
hi Andrew, try to press the pairing button and keeps hold for 3 sec. then switch the ignition in first position while still holding the button for another 3 sec then the the pairing messeage should be sig on. but it the pairing messeage did not show i suspect that your ULF control unit is faulty and needs to be replace.
SOURCE: pairing my phone
try this guy, he has all the manuals in pdf file and if he doesn't, just ask for it
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=180490869526&viewitem=&sspagename=STRK%3AMESELX%3AIT
134 views
Usually answered in minutes!
×