Question about 1996 Ford Econoline

1 Answer

The van was stuck in traffic and when we decided to drive, the transmission fluid was all over the road. I was told it was the transmission pressure hose or line bursted. I would like to know where is the location of this line or hose?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 2,002 Answers

Crawl underneath the van and you will see two steel lines coming out of the transmission going to the front of the van. That is what you are looking for. They can be replaced with steel brake line from your local auto parts store, just make sure that the brass ends are the same. Ends can be changed if you or someone you know has a flaring kit.

Posted on Jun 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinding noise when in gear


Sad to say but you will be needing to get a new transmission ..

Sep 17, 2015 | 2004 Chrysler Town & Country

1 Answer

99 Dodge Caravan transmission is not wanting to go into reverse


the reverse work when you raise the car because is no force to the wheels

Sep 07, 2014 | Cars & Trucks

1 Answer

1999 Dodge Grand Caravan Transmission will not go into reverse


It sounds as if your pump pressure is quite low. there is enough pressure for the trans to work with absolutely no load on it, but not enough for it to work properly.

Sep 07, 2014 | Cars & Trucks

2 Answers

Transmission problems van stuck in first gear


At minimum it is stuck in limp mode which is to protect the transmission due to a malfuntion but still allow the vehicle to move. You need to get it to a garage and have a scan tool connected to the 16 pin connector under the dash. The stored trouble codes received will give the correct path for troubleshooting because it could be a lot of things.

Jan 01, 2011 | 1996 Plymouth Grand Voyager

1 Answer

Can you tell me if a 97 dodge caravan transmission 3.3 will interchange with a 3.8. This is the trouble i have had and have decided to put in Transmission. Driving down the road and van sounded like it...


1. Yes the 3.3 and the 3.8 are the same bolt pattern. But the gear ratio in the differential might be different.

2. Did you replace the filter and put it back together? Does it do the same thing after you changed the filter? If it was an electrical issue with speed sensors or the solenoid pack, reverse would still work.

Jun 09, 2010 | 1997 Dodge Caravan

2 Answers

My 2000 Diamante goes into "limp" mode under "extreme" conditions


yes is true what the dealer told you inside your transmissions there are clutch like the stickshift ones the disks(clutches) are worrren out need a transmission replace before you get stuck in traffic

Sep 01, 2009 | Mitsubishi Diamante Cars & Trucks

1 Answer

Code po742 came up while getting smogged, van does **** on occasion. code is TTC stuck on. the van does not do it all the time. is there something i can do to help this problem> 1999 olds silhouette


TORQUE CONVERTER CLUTCH SYSTEM STUCK ON.PROBLEM COULD BE PRESSURE REGULATOR VALVE IS STUCK.OR THE TCC FLUID CIRCUITS LEAKING OR ABNORMALLY LOW HIGH LINE PRESSURE.OR THE TCC RELEASE SWITCH CIRCUIT IS SHORTED TO GROUND.CHECK TRANSMISSION FLUID LEVEL.IF TRANSMISSION FLUID LOOKS REAL DARK LOOKING AND SMELLY .CHANGE THE FLUID AND FILTER.IF THIS DONT HELP ! YOUR PROBLEM COULD BE A BAD TORQUE CONVERTER CLUTCH SOLENOID OR INTERNAL DAMAGE INSIDE TORQUE CONVERTER.OR RESTRICTION IN OIL PASSAGES AND STOPPED UP OR BLOCKED TCC SCREEN.

Aug 29, 2009 | Oldsmobile Silhouette Cars & Trucks

1 Answer

98 Jeep Grand Cherokee Stuck in 1st gear!


I would drop the trans pan and change fluid & filter. If you find an extreme amount of debris in pan, filter may have become partially plugged, which can lower internal pressure. Only problem is that if there is enough debris to plug up filter, it indicates wear inside unit, which a fluid change will not correct (no chemical will) But, if problem becomes somewhat better after oil change, an additive such as Lucas conditioner may prolong useful life somewhat.Otherwise, have unit rebuilt.
good luck

Mar 04, 2009 | 1998 Jeep Grand Cherokee

1 Answer

My 2000 jaguar s-type transmission is acting up


your fluid needs topping up, auto matic transmissions actually use the oil to drive, not friction plates as in normal manual transmissions

Feb 16, 2009 | 2000 Jaguar S-Type

Not finding what you are looking for?
1996 Ford Econoline Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...