Question about Pontiac Grand Am

1 Answer

How is the driver seat removed in a 2004 grand am??

Posted by on

  • Jim Thurston Jun 21, 2009

    I found the two rear bolts, no problem, but there aren't any front bolts. After the rear bolts are removed the seat will rock forward to the ceiling. The front will not lift out of the slots in the floor. The front appears to go into the floor and hook the floor toward the rear. I tried to slide the seat forward to lift it from the slots but it will not move far enough to clear the slot. It look as though it would roll up to the front and lift out if the headrest was removed, but I have not removed this type headrest before.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Remove the 4 floor board bolts and unhook seat belt and belt connects they have plastic covers on them and usea screw driver to remove the caps. remove the belt connector wires and lift out.

Posted on Jun 21, 2009

  • Bruce Hathcock Jun 22, 2009

    the head rest should just pull all the way out when you hit the release button.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHERE IS THE FUEL DOOR RELEASE JEEP GRAND CHEROKEE 2004


usually on the floor in front of the drivers seat .

Feb 24, 2015 | 2004 Jeep Grand Cherokee

1 Answer

I need to remove and replace a 2004 Honda Odyssey drivers seat. (power). My manual says I need a 'seat removal tool'. What is this and how do I get one?


You don't need any special tools to remove driver's seat. Only you have to do is to disconect battery at least 3 min. before disconecting cables from underseat wires. Seat is mounted to the floor with four bolts.

Mar 29, 2014 | 2004 Honda Odyssey

1 Answer

How to remove grand prix window switch cover


Remove the two bolts on the bottom portionof the rear seat cushion.Pull the tabs along the bottom portion of the rear seat cushion until it unhooks from the floorboard mount. Pull the cushion out of the back seat area and set it down. Remove the anchor nuts. Push the seatback toward the rear and up to disengage it from the hangers. Pull the rear seatback out of the Grand Prix, preferably with the help of an assistant. Is there anything else you need?if you need an auto tool you can click here: great tools

Oct 26, 2012 | 2004 Pontiac Grand Prix

2 Answers

How do you take out the front seats on a 2004 grand prix gt?


You will need to crawl under the vehicle. The bolts holding them down are located there. You may need two people. One to hold the bolt secure insde the car and one to turn the bolt from underneith. There maybe as many as 6 bolts per seat. I am assuming these are bucket style seats. Tell me how it turns out, Raz

Apr 18, 2010 | 2004 Pontiac Grand Prix

1 Answer

Need to remove 2004 Yukon drivers seat. how do


there are plastic covers over the front bolts that hold the seat to the floor remove the screws the hold these covers on then remove the two front bolts under these covers then move the seat all the way forward and you should be able to see the two bolts that hold the rear of the seat to the floor pan there could be covers on these to remove the bolts and then tip the seat forward and unplug the wire connector for the power seat(if it has this option).hope this helped

Jan 01, 2010 | 2004 GMC Yukon

1 Answer

Drivers Power seat broken-the support metal arm-2004 Grand Cher


Should just be 4 bolts holding the seat to the floor, and unplug the wires. Only way to fix it is weld it, or get a different base from an auto wrecker.

Nov 02, 2009 | 2004 Jeep Grand Cherokee

1 Answer

Remove 2004 Dodge Grand Caravan D-pillar panel


To remove the panel completely. You must remove all screws & the seatbealt bolts for the 2nd & 3rd seats

Oct 13, 2009 | 2004 Dodge Grand Caravan

2 Answers

Letting down back seat for pontiac grand am 2004


open the trunk and look up under the speaker area there r two straps located there pull on these straps one for each back seat then the seats will let down

Dec 31, 2008 | 2004 Pontiac Grand Am

1 Answer

Jack Location for Tire Change


under the back seats, jack is under the driver's side backseat, tire iron & rods are under passenger's side backseat.

Aug 18, 2008 | 2004 Jeep Grand Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8567 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...