Question about 2005 Hyundai Santa Fe

Open Question

I need to replace my heater switch 2005 Santa fe inside on the dash. However I cant sem to ge the large knob off the switch . Is there a trick to it? I had the dash off and maybe i didnt pull it hard enough or is there a trick to it?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 15 Answers

SOURCE: control for fan blower not working on any speed.2005 santa fe

Don't.  What you have to do is take the ashtray out then remove the 2 screws.  Pry the whole assembly off and replace the switch in the back. The knob only moves the switch back and forth and nothing more.

Posted on Oct 18, 2008

Ad
ghost4548
  • 776 Answers

SOURCE: interior fan control knob doesn't work

you have to remove the AC panel from the back side... the virtical console pops out and you can disconnect it (wire harness connectors) to get to it.

Posted on May 31, 2009

  • 8 Answers

SOURCE: 02 Santa Fe brake and battery lights wet conditions only

sounds like you got the altenater wet which can cause oxidiseation .yo should check this at a auto electricions

Posted on Jul 07, 2009

  • 67 Answers

SOURCE: The blower knob on the a/c in my santa fe doesn't

chances are the blower switch has an internal open and needs to be replaced. if you remove the ashtray there is 2 screws to remove and pull the bottom piece out. check the wires for the blower switch for any melting. if they are ok replace blower switch

Posted on Jul 28, 2009

  • 83 Answers

SOURCE: how do I remove the console from a 2007 hyundai

From the factory service manual

1. Remove the screws holding the console side cover and remove the side cover.

2. Remove the screws holding the floor console assembly and then pull out the floor assembly. (looks like a two screws inside the arm console in the diagram)

Here is a link to a factory service manual for your SUV. Hyundai Service Manuals

Posted on Sep 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why isn't the A/C working?


hi

check to see if there is a fuse for the air con and if it needs replacing

dash
25717574-extj4arg1t42xbh3l3byl5v2-3-0.jpg

under the hood

25717574-extj4arg1t42xbh3l3byl5v2-3-1.jpg
cheers

May 28, 2015 | 2005 Hyundai Santa Fe

2 Answers

Where is starter on 2005 Hyundai Santa Fe located? 6cyl 2.7


Bottom of the engine, near the rear. You can follow the cables from your battery, very large cable that runs down near the firewall.

Mar 26, 2015 | 2005 Hyundai Santa Fe

1 Answer

Florrboard on drivers side stays wet on 2005 santa fe even when it hasn't rained in over a week losing coolant regularly


Sounds like your heater core has sprung a leak and needs replacing. Verify if the wetness is plain water or coolant. Engine coolant circulates through the heater core (just like a small radiator) and gives up a small amount of heat, which the blower fan picks up and blows out the heater vents. Replacing the heater core is quite easy, or a total nightmare, depending on manufacturer's design-when you have to remove the dash from the vehicle to get at the core-that's what I mean by a nightmare. Check a repair manual for your car to see how difficult the procedure is. Good luck.

Feb 11, 2013 | 2002 Mitsubishi Eclipse

1 Answer

On the blower switch how does the knob come off, I can not pull it off? is there a trick?


the knobs are glued on permanent. if there is a problem with switch for heater you have to replace entire controls. just another way the company trys to make more money

Jan 20, 2011 | 2004 Hyundai Santa Fe

1 Answer

The heater fan blower switch has shorted out on my 2004 Hyundai Santa Fe. I can get it to work if I turn it on and then push the knob up and hold it there. How do you replace those?


Get the same type sourced only from the Hyundai service, remove the whole set of the switch from within and replace .
Alternatively since the part is sourced from them-- check availability- the cost of service will almost be inccluded in the spare and so it is best to have them install it.

Sep 02, 2010 | 2004 Hyundai Santa Fe

1 Answer

My 2006 sante fe heater knob seems loose and the


the heater blower switch is bad is loose. Get a replacement and I am sure it will work fine for you

Feb 04, 2010 | 2006 Hyundai Santa Fe

2 Answers

The heaters on my 2005 hyundai santa fe have stopped working? no air hot or cold is being blown out of the ducts! the car is not overheating, the light for the source (recirculate/drag air from outside) is...


Sounds like the blower is not working for starters. We need to troubleshoot blower issues and once we get that straightened out, see what you have. Start with the fuse box and make sure the blower fuse is good. If you have to look further, check fuses and relays under the hood. If this is all good and the blower is still not working, it is a wiring or switch or blower motor issue. Hope this helps!

Nov 05, 2009 | 2005 Hyundai Santa Fe

1 Answer

I have a 2002 Hyundai Santa Fe. My A/C, Heater,


so, is it a switch on the knob? Mine started acting up today.

Apr 21, 2009 | 2002 Hyundai Santa Fe

1 Answer

Steps to remove radio


  • Step 1:Disconnect the negative cable from the battery terminal. Position the cable to is doesn't come in contact with any metal parts.

  • Step 2:Pull out the ashtray and remove the two screws that connect the bezel around the radio. Pull off the climate control knobs and remove the two screws at the top of the bezel trim.

  • Step 3:Remove the trim and disconnecting any wires. Not all models will have connecting wires on the trim.

  • Step 4:Locate the two screws, one on each side of the Hyundai Santa Fe stereo, and pull the head unit out of the dash. Disconnect the wires behind the radio.



  • Thanks for using FixYa - a FixYa rating is appreciated!!

    Feb 20, 2009 | 2004 Hyundai Santa Fe

    2 Answers

    Control for fan blower not working on any speed.2005 santa fe


    Don't.  What you have to do is take the ashtray out then remove the 2 screws.  Pry the whole assembly off and replace the switch in the back. The knob only moves the switch back and forth and nothing more.

    Oct 15, 2008 | 2003 Hyundai Santa Fe

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    186 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8270 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...