Question about 2005 Ford E-Series

2 Answers

While accelering in my 2000 ford e450 super duty from 30 km to 50 km the truck vibrates and after that there is no vibration. i have replaced the hanger bearing and all the front end work.(ball joints, shocks,tie rod ends, all of it.could someone help me with this? thank you

Posted by on

  • Giovanni Jun 23, 2009

    to: jg1523

    Thank you very much as you were right it was the rear u-joint that was worn out which caused the vibration, it is now fixed and runs great.

    thanks again



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 150 Answers

Have a look at the transmission mount. Also look at the universal joints in the drive shaft.
If the transmission mount is bad or mushy it will allow the metal part of the mount to touch the crossmember causing a vibration.
A dry u-joint will also cause a vibration. Even if the u-joint isn't worn out or has visible play. Being dry will cause this. Are the u-joints factory? Do they have grease fittings on them? Have they been replaced? How many miles on them?
If the u-joints don't have grease fittings then they are most likely factory u-joints. Hope this helps. Good luck.

Posted on Jun 21, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a Ford E450 And when you get to 65mph and over there is a vibration

Posted on Sep 23, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is wrong with the front end of my f 250?

I do know there was a factory recall on these trucks due to a throttle problem, check with a main dealer, as for the shudder it could be the wheel balancing.

Jul 29, 2014 | 2002 Ford F250 Super Duty SuperCab

2 Answers

Front end vibration

Have the tires been balanced? Has the front end been inspected for worn parts? It is opne of these.

Sep 05, 2012 | 2006 Ford F-250 Super Duty

2 Answers

I replaced rotors and brakes still vibrates

when does it vibrate, my gosh. vibration when at 65-75mph is balancing, vibration in steering wheel is front brakes. pulsation in brakes is rear. vibration all the time on or off brakes, bad tire............need more info.

Mar 07, 2010 | 2003 Ford F250 Super Duty Crew Cab

1 Answer

Front end vibrates when the hubs are locked

Either the front driveshaft is out of balance or the front axle u-joints are binding and need replaced

Oct 27, 2009 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

Ford super duty vibration/shake

The carrier bearing should not move at all. It is mounted in rubber to give a little. But, it should not move freely. If this is the case then something has gone bad. The carrier bearing would cause this vibration as it spins if it is loose.

Mar 16, 2009 | 2002 Ford F250 Super Duty SuperCab

Not finding what you are looking for?
2005 Ford E-Series Logo

585 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

81342 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

gerry bissi

Level 3 Expert

4376 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides