Question about Cadillac DTS

2 Answers

My cadillac dts has bad vibrations over 50 mph ,

My cadillac dts (2003) has bad vibrations over 50 mph , suspension is new, tie rods , hubs, breaks front and back and still wont go away after wheel alignment Im very frustrated actually extremely frustrated

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Cadillac Master
  • 426 Answers

Very well could just be a bad tire. I have replaced brand new tires straight from manufacturer you should check for a bad wheel or balance of tire and perferabley somewhere where they do a phase match balance.

Posted on Jun 21, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There are a few things it could be. A tire could be out of balance , a bad tire , a bent wheel , or someone could have over torqued the lugs in a circle instead of a criss-cross pattern , also from the factory they put a little clip on the wheel studs to hold the rotor or brake drum on while they mount the wheel & tire . I know it's a small piece but if it is pinched between the wheel & rotor or drum it is just enough to throw it out of balance . A tire shop should be able to find the problem. If it is the tires & or wheels.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pass front wheel vibration 2003 Buick Lasabre with 120K onit. At 55-70 MPH. New tires on it. New bearing/hub at 95K miles.New ball joint and control arm. New tires, Rotated and Rebalanced.


when you rotate the tires and their is no change check the c/v axle -and hub 25k is not considered new have changed hubs that have gone bad at 10k -look into ball joints,upper lower bushings ,tie rod,struts the latter can cause vibration but usually at all speeds

Sep 02, 2016 | 2003 Buick LeSabre

1 Answer

Starts to shake 40 mph


balance the wheels????

Dec 07, 2015 | Cars & Trucks

2 Answers

ES Lancer - vibration, dull grinding noise when turning right, even at low speeds. Intensifies as I approach 30+mph. Replaced CV Axle, Tie Rod End, Bearing, and Hub. No dice.


Turning right and having a loader noise, means the left/drivers side is bad. Turn right, more pressure on the left side. and vice versa.

Aug 09, 2015 | 2003 Mitsubishi Lancer

1 Answer

Fix for cadillac deville 2000-2003 vibration between 65-70 mph


Have your Mechanic check the steering tie rod bushings, and linkage. Sometimes it's just an adjustment to the steering box play(located at the end of the steering wheel shaft), - easy to fix.

Aug 23, 2014 | Cadillac DeVille Cars & Trucks

1 Answer

VIBRATION BETWEEN 40-45 MPH


Replace the wheel bearings

Nov 18, 2012 | Cars & Trucks

2 Answers

2001 Ford windstar has a rumble/vibration on left front when driving over speeds of 10 mph. Consstant and increases with speed.


It sounds like you have a bad spindle/hub. You will need to jack up the front left tire, remove the wheel and the brake caliper and pads. Now spin the hub by hand. If you hear a grinding like sounds or low rumble sound, or there is more resistance than normal, replace your hub/spindle assembly.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Jul 06, 2011 | 2001 Ford Windstar

2 Answers

Hub making grinding noise tie rods need replacement


A grinding from the hub sounds like a bad wheel bearing.

Jun 01, 2010 | 2001 Buick Park Avenue

1 Answer

Vibration on my 2002 sls between 55-65 mph.


Quite possibly you have warped brake rotors .

Nov 16, 2017 | 2004 Cadillac Seville

2 Answers

Does the air suspension automatically adjust after tires are off


i have a 2000 deville dts has a vibration driving down the highway have put new tires new axels new brakes nothing helps any solutions

Mar 01, 2009 | 2000 Cadillac DeVille

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

702 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

Marvin
Marvin

Level 3 Expert

81285 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...