Question about 2002 Hyundai Accent

Open Question

Where is the evap leak detection pump located on a 2002 hyundai accent?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
maklean
  • 1665 Answers

SOURCE: location of Charcol Canister and

The evaporative emission canister purge solenoid valve is a duty control type, which controls the flow of purge air from the evaporative emission canister.
4a6acf4.gif Inspection 1. Look for loose connections, sharp bends or damage to the fuel vapor lines. 2. Look for distortion, cracks or fuel leakage. 3. After removing the EVAP canister, inspect for cracks or damage. 0e0e1be.gif

Posted on Sep 04, 2008

Ad
  • 566 Answers

SOURCE: hyundai accent, location of fuel cut off

hi from uk location of fuel safety shut off valve/switch on uk r/h drive accents is on the engine bay bulkhead in front of drivers side it is a square box with red rubber top press button may be on opposite side on l/h drives ? if activated? just press button till click ? to reset these normally only cut off on impact ? to stop elec fuel pump continuing delivering if involved in an R.T.A fire prevention

Posted on Jan 08, 2009

ghost4548
  • 776 Answers

SOURCE: trying to find the fuel filter in a 2006 Hyundai Accent

YEP! It's in the fuel tank at the bottom of the fuel pump... it's called a 'SOCK.'

Posted on Jun 30, 2009

omaromid
  • 332 Answers

SOURCE: Can't get gas into my 2002 Hyundai Accent.

The reason the gas station pump shuts off is when the fuel reaches the tip of the gas nozzle, so when you are filling your car and the gas nozzle (gas stations pipe) keeps shutting off it means that the pipe that runs to the gas tank is not open completely, what happens is when you pump the gas in the car the supply pipe from the gas tank opening to the tank fills up quickly and this causes the gas station pipe nozzle to shut off, have some body take down the gas tank and have a look at the gas tank opening and also gas supply pipe that runs from the gas filler opening ( on the car body) to the gas tank. Have a look at it and please don't forget to rate the answer if it was helpful, thanks!

Posted on Mar 25, 2010

subikid90
  • 180 Answers

SOURCE: 2002 Hyundai Accent GL error code P0442, EVAP

You have a vacuum leak. This means that you will need to go through all of the vacuum likes and make sure they are connected and not broken. If they are broken buy new vacuum line, its like less and $1 per foot. In your case if you can I would replace all of the vacuum lines if they look cracked and old.

Posted on Nov 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace a water pump on a 2002 hyundai accent gs dohc 16v?


THE WATER PUMP IS NORMALLY LOCATED AT THE FRONT OF THE ENGINE, DRIVEN BY A PULLEY.

Jun 20, 2015 | 2002 Hyundai Accent GS

1 Answer

2006 hyundai accent, trouble code p0455, what is problem and the fix?


P0455-EVAP system large leak detected. Check hose connections, intake leak, EVAP canister or EVAP canister purge valve.

Sep 25, 2012 | Hyundai Accent Cars & Trucks

1 Answer

2006 hyundai accent, trouble code P0455 What is problem and the solution?


P0455 HYUNDAI - EVAP Emission System Leak Detected Large Leak detected.

Sep 24, 2012 | 2006 Hyundai Accent

1 Answer

Mi hyundai accent GLS 2002 tiene el check encendido y tiene los errores p1401 y el p0442, que puede ser y como puedo solucionarlo, ademas la luz del dasch se apaga y se enciende constantemente que puede...


The 2000 model year Accent adopts a different "pressurized" leak check system capable of detecting a 0.020" (0.5 mm) diameter leak (previous Hyundai systems detect a 0.040" [1mm] diameter leak using engine vacuum). The new system uses a Diagnostic Module for Tank Leakage (DM-TL) to close and pressurize the fuel evaporative emissions system. The DM-TL replaces the fuel tank pressure sensor and the canister close valve from previous systems. Other significant changes were made to the system logic, including several new diagnostic trouble codes. It compares the differences between the 2000 model year Accent and previous evaporative emission systems... Que puede ser? Tiene dos opciones. Primero, puede pagar que un tecnico diaga el problema (exactamente) o sigue, secudariamente, su adivnaza.

Jul 11, 2011 | 2002 Hyundai Accent

1 Answer

Problem p0442


P0442 Means you have a leak in your EVAP system.
The EVAP system prevents gas vapors from entering the air .
This code can be set by a leak in the lines os a clogged charcoal canister.
Most common reason is If you did not put your gas cap on all the way.
Hope this helps
Leave feedback please
thank you FixYa

Feb 01, 2011 | 2002 Hyundai Accent

1 Answer

2002 Hyundai Accent GL error code P0442, EVAP leakage. WHAT DO I NEED TO DO TO GET THE CHECK ENGINE LIGHT OFF? Thank you! Randy


You have a vacuum leak. This means that you will need to go through all of the vacuum likes and make sure they are connected and not broken. If they are broken buy new vacuum line, its like less and $1 per foot. In your case if you can I would replace all of the vacuum lines if they look cracked and old.

Nov 18, 2010 | 2002 Hyundai Accent

1 Answer

Location of evap


There are a few parts to evap, the canister is located under the van near tank then the evap valve is in engine area, the leak detection pump is located under van on front driverside, then you have lines that run from tank to canister then to engine then lines that run to detection pump and vent valve.

Aug 14, 2010 | 2002 Dodge Caravan

1 Answer

I have a 2002 hyundai accent, i could not pump gas into the tank, i found charcoal pellets in the hose from the evap canister to the tank fill neck. I emptied the hose and i can pump gas. now my car is...


First GUESS.. replace the charcoal canister after you have cleaned out the hoses between it and the canister. Then blow air between the purge control solenoid valve and the fuel tank.

Oct 23, 2009 | 2002 Hyundai Accent

2 Answers

Error code p0442


EVAP Emission Control System - Small Leak Detected (1.0 mm). This code can be set when 1. fuel filler cap is not completely tight, 2. when various hoses get punctured or the canister close valve does not seal completely, 3. there is an actual leak in the charcoal canister, fuel tank, or other EVAP system component, 4. if any one of these components are malfunction (a), fuel tank pressure sensor, (b) purge control solenoid valve, (c) canister close valve, or (d) fuel cap. An engine vacuum leak would not set this code.
Solution: Take the vehicle to a Hyundai Dealership for proper diagnosis/repair.

May 23, 2009 | 2001 Hyundai Santa Fe

1 Answer

Hyundai Accent 2003 - gas pump clicks off when tank isn't full.


possible cause could be evap canister full of gas causing back up

Feb 08, 2009 | 2002 Hyundai Accent

Not finding what you are looking for?
2002 Hyundai Accent Logo

Related Topics:

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...