Question about 1995 Chevrolet Camaro

2 Answers

Engine won't crank over,it's a five speed when pushed starts right up and runs good.when turned off will not start when you turn the key nothing,not a sound at all..

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 148 Answers

Check to make sure the clutch pedal switch is functioning and that the floor mat isn't blocking the clutch pedal from hitting the switch, basically its either the clutch pedal switch or something between the ignition switch to the starter but i'd try the clutch pedal switch first, its the easiest to check

Posted on Jun 21, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 2,007 Answers

Battery connections loose or corroded. Battery discharged or faulty. Starter solenoid faulty. Starter motor faulty. Ignition switch faulty. Do you headlights and everything work when it's not running?

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 1995 chevy s 10 won' start. I like to try hot wire.crank but will not start.help me??


Won't start how ? no crank - no start , which means when you turn the key to the start position nothing happens , starter doesn't engage. Or the starter turns the engine an it doesn't start an run. a crank - no start ?

Nov 20, 2015 | Chevrolet S 10 Cars & Trucks

3 Answers

1999 mustang won't start. Good battery, good


bypass the starter motor, see the diagrams attached. You will have a new view vision with this.
God bless you25e0a744-012c-42b8-8b25-e51a5ab304fc.jpg75c3a3e5-7841-41b8-ba06-3aa4ea3e7169.gif

Jul 23, 2013 | Ford Mustang Cars & Trucks

1 Answer

2005 ford five hundred engine turns over but won't start


do you know if you are getting gas. is there a buzzing noise in the gas tank when you turn the key. is there spark at the spark plugs. if there is not spark then you may need a crank position sensor. I am a self employed mechanic and I am on face book

Oct 31, 2012 | Ford Cars & Trucks

1 Answer

HARD TO START


To clarify, the engine cranks and starts. If it cranks but won't start until 4 or 5 tries, I would check the fuel pressure before and after the first attempt. The check valve in the pump may be faulty and allowing the fuel to flow back to the tank when it is not running. The pump only gets power for the first 3 seconds during crank time until the engine starts.

Aug 27, 2012 | 1999 Chevrolet Express

3 Answers

My 96 jeep Laredo will not turn over. I've checked


sorry turns over means ZERO
the crank shaft can spin or not
the starter can in fact spin and crankshaft not.
and some think turns over means, engine runs. now that fact makes turns over, a dead statement.

the word is cranks over, the engine cranks over robustlyl
and then the engine runs.
then runs for more that 3 seconds, and the ASD relay holds. (step by step his works like this ,93 to now)

wont crank ? (clear statement in fact)
cranks ok, (crank shaft spins fast) can be seen and heard.
runs for 3 seconds? and stalls (ASD relay drop out) can be seen.
runs for 5min and stalls. (complex)
runs for hours and stalls. (even more complex)
all are key facts to the solution.

tell more..... tell all it does good bad or ugly
for better suggestions!

Jun 06, 2012 | 1996 Jeep Grand Cherokee

1 Answer

I have a 96 pontiac grand am that doesnt start all the time


Starting Problem # 1: Engine Won't Crank At All

Scenario: You turn the key, but nothing happens: And by nothing, we mean there is no dash light, no sound, nada. The first thing you should do in this case is to pop the hood and check the battery. Either the battery is completely dead or there's a wiring problem in the starting system. Try jump-starting the battery. If that doesn't work, you'll probably have to call for assistance.

Scenario: When you turn the key, you hear a rapid clicking sound, and the dash lights dim. This is your classic low-battery symptom. Jump-starting the battery should get the engine to start.However, if you keep experiencing this problem, you could have a bad battery or alternator, or it could be some­thing as simple as a loose alternator belt. Take your car to a mechanic just as soon as you can.

Scenario: When you turn the key, the lights on the dash come on, but you don't hear anything. Make sure you have the shift selector all the way in park. Move it out of park and then back, or try starting it with the shifter in neutral. If your car has a manual transmission, make sure you have the clutch pressed all the way to the floor. If that doesn't help, you can try jump-starting the battery, but it probably won't work. There's a good chance your car has a bad starter or a problem in the starting circuit. That could mean a prob­lem in the ignition switch, neutral safety switch or starter sole­noid.

Scenario: The dash lights come on when you turn the key, and then go right out, and the engine doesn't crank when you turn the key to start, But, the lights slowly come back on when you release the key. This is another classic: the bad battery connection. When you turn the key to start, the starter pulls so much current that it breaks the connection. Then, when you release the key, the connection slowly comes back. The connection provides enough power to turn the dash lights on, but not enough to crank the starter. Cleaning and tightening the battery terminals may fix this prob­lem.

Scenario: When you turn the key, you hear a single, hard clunk. Turn the headlights on and try again. Do the lights dim slightly when you turn the key? If so, you probably have a bad starter or a seized engine. If the headlights don't dim at all, or just barely dim, there may be a connection problem between the starter solenoid and the starter itself.

Scenario: When you turn the key, you hear a loud, scraping or grinding sound like metal on metal. The starter drive is bad, or the ring gear on the flywheel damaged, or both. You may get the starter to engage if you try turning the key a couple of times, but let go of the key right away if you hear the noise again. If the car does start, you should drive it right over to local repair shop and have the problem fixed.

Starting Problem #2: Engine Cranks but It Won't Start

Scenario: The engine seems to crank normally, but the engine doesn't even sound as if it's trying to start. Is there gas in the tank? Gas gauges are notoriously inaccurate. If you have to move your head to one side to get the needle to move off empty, try adding some gas to the tank.

Scenario: When you first turn the key on, you don't hear the fuel pump run. In cars with electronic fuel injection, you should hear a light hum a few seconds from around the fuel tank. That's the electric fuel pump running. If you don't hear the fuel pump run for a couple seconds when you first turn the key on, try cranking the engine until the oil light goes out. That may start the pump running and allow the engine to start.

Scenario: The engine cranks normally, and it sounds like it wants to start, but it won't. You may have flooded the engine. Hold the gas floor and try again. (Let the gas pedal up when it finally starts). If it's raining out, the ignition system may be wet.

Scenario: The engine cranks unevenly in a repetitive-sounding pattern. You may have a bad timing chain or timing belt. Call a tow truck and have it towed to the repair shop.


Starting Problem # 3: Engine Starts but It Shuts Off

Scenario: The engine starts right up, but shuts off as soon as you release the key. This is the classic symptom of a bad ignition switch. A new switch should fix it.

Scenario: The engine starts and runs, but when you put the transmission in gear, the car lurches and the engine shuts off. The converter clutch in the transmission torque converter probably is engaging when it shouldn't. On some cars, you can bypass this by disconnecting the torque converter clutch solenoid; but unless you know which wire to pull, forget about it. Call for assistance.

Scenario: The engine starts and runs, but seems to idle slowly and stalls when you come to a stop. This probably is a fast idle problem. When the engine is cold, it's supposed to idle a little faster than normal to keep the engine running. You may be able to drive using two feet until the engine warms up: one on the gas to hold the idle up a little and the other for the brake. However, don't keep driving it this way. Take your car to your repair shop just as soon as you

Jul 21, 2011 | 1996 Pontiac Grand Am

1 Answer

MY 98 FORD EXPLORER CRANKS BUT DOES NOT TURN OVER. I HAVE POWER BUT MY VEHICLE WON'T START


You mean that the starter is turning (cranks) the engine but the engine won't start? Be sure it is getting fuel. Turn the key to the on position and you should hear the fuel pump in the fuel tank run for a few seconds. If so that is good. If the fuel is being delivered then possibly you have no spark which usually is the electronic ignition module. The only way to test it is to replace it. Your timing chain or belt could be broken or "jumped" as the third possibility. I am leaning toward ignition module being bad as they just die without warning and nothing can revive them.

May 18, 2011 | 1998 Ford Explorer

3 Answers

My Ford five hundred won...t turn over (crank)...the lights are on and when I turn the key I hear a ticking sound but it wont crank...what problem might I have


All indicates to a flat battery. If the lights work or the horn blows, that is no indication that the battery is still good. You need to use a hydrometer to test the electrolyte SG to check if the battery is at full charge.

Apr 12, 2011 | 2006 Ford Five Hundred

Not finding what you are looking for?
1995 Chevrolet Camaro Logo

207 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...