How can i tell if it is icm or fuel relay
Ok look in the fuse box, if possible, exchange a fuse equal to the fuse relay, if it starts the problem is solved, if not, that`s not the problem, and additional diagnostics will be required, also, add about 2 or 3 additional gallons of gas to the tank, then for total fuel diagnostics only, get some starter fluid, spray a couple of good size squirts in the throat, if it start, bad fuel pump
If you need further help, reach me via phone at https://www.6ya.com/expert/reginald_d1f35dc049b0256a
SOURCE: 1997 Isuzu Rodeo 4 wheel drive
j'aimerai entrer en contacte avec pour l'achat de votre vehicule
SOURCE: wont start 1999 isuzu rodeo
Locate the Fuel Filter and Take it loose. Try to Start the Truck, If the Pump is Good, Fuel will come out of the Fuel line going to the Filter. Please Rate My Response! Thanks!
SOURCE: no power to fuel pump 1996 isuzu rodeo
well i got a salvaged ecm from a junkyard and put it in, still did'nt start. took alternator off to have it checked , it is fine. put it back in and now it starts and runs fine. check the alternator and the connections, i heard the alternator controls power after the initial ecm prime when it is turned on. i have no idea how true it is, but worth a shot. if you can find a cheap ecm for a junkyard (mine was 75 bucks) i would try that afterwords.
SOURCE: 2000 isuzu Rodeo wont start
Could be your neutral safety switch, or it's not all the way in park. Broken or loose wires in the starting circuit. Inspect all wires and connectors at the battery, starter solenoid, and ignition switch. Or your starter pinion is jammed in the ring gear. Remove starter and inspect. Last but not least, your engine is seized. You don't want that one. Good luck.
SOURCE: 991 Isuzu 2.6l petrol runninf problem!
I realise you have probably solved this problem by now so sorry for the late news mate . Had a similar prob and it turned out to be an alternator malfunction . I replace the brushes and off she went . These things send voltage from the alt . to a fuel pump relay or whatever so the pump wont run if the eng isn't (or the alt isn't outputting any voltage.) . Hope you already had it sorted . But I hope this helps if not . Cheers Simon .
307 views
Usually answered in minutes!
×