My nissan pulsar n13 motor starts sometimes and runs good but when i turn it off it wont start again as i have changed the distributer, ecu unit, all fuses, and all fusible links, i cannot find were the immobiliser is if it has one, would it be the ignition switch, it is the carberetor model, hope you can help, thanks barry.
I had the same problem it gets hot don't use the remote for immobiliser just press the button once and leave it
Does it spark and not fire up ? or not turn over at all ?
Is it a manual or auto transmission on the car?
516 views
Usually answered in minutes!
the car is an automatic transmision
car turnes over all the time, but only starts sometimes,soon as you turn car off it will not start again, as something is stooping the power to the car.
sounds like like a fuel problem if you've checked the spark ,check for any cracks etc to the pipe work to and from air intake ,carberetor and vacuum system ,remove a plug a turn engine over a smell if there is fuel getting through to the cylinders , check operation of fuel pump if not getting fuel
car is getting fuel to it, when the car decides to start i can drive it were ever i like but the the moment i turn it off, it wont start again.e
you need to check its got spark/getting fuel when the engine isn't starting so these can be eliminated as the cause if you have done that then the problem elsewhere so check the air intake isn't getting blocked by the intake hose/pipe collapseing test this when you have engine running lift hood get some one to rev engine a look to see if air intake pipe isn't becoming flat ,
×