Question about 1996 Ford Explorer

1 Answer

Car stalls when in idle.

Whenever i slow down to an idle speed the car shuts off. I took it to have diagnostics run on it and the computer said there was a problem with the speed sensor. The speedometer and odometer both do not work. i ended up buying and replacing the speed sensor but both still do not work. The gear that slips onto the speed sensor was a little stripped. Could that be the problem or is there a more serious problem i have.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

IDLE CONTROLL SENORS.OR TROTTLE BODT NRRD CLEANED

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My truck stalls


Engine stalls cold or RPM fluctuates at idle up and down or dies near idle.

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Oct 19, 2012 | 1989 Mazda B-Series

1 Answer

Car stalling when slowing down


This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve but always run a OBD2 fault code as well as the cleaning procedure. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control


Oct 14, 2012 | 1997 Ford Expedition

1 Answer

Car stalling when in idle


Engine stalling and rough run issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Aug 30, 2012 | Peugeot Cars & Trucks

1 Answer

NISSAN LEC 93 SHUTTING DOWN WHEN SLOWING DOWN


Engine stalling and rough run issue at low speeds

This problem is commonly caused by a dirty automatic idle speed control valve and throttle valve. Buy a can of throttle valve cleaner (do not use carburetor spray cleaner!) from NAPA or Carquest (made by CRC chemicals) and spray it into the air intake while the engine is running, use up about 1/2 the can, engine will try to stall hold the speed up, shut it down and let it soak for 30 minutes, restart and blow out the remaining fluid, shut it down and disconnect the negative battery cable for 5 Min's to reset the base idle control

Aug 30, 2012 | Cars & Trucks

1 Answer

My '94 Ford Taurus stalls whenever its idling in neutral or drive, in park its completely fine. When I give it gas in drive or neutral its completely fine and runs perfect but if i come to a light, or slow...


Disconnect your battery black wire off for 1/2 hour reconnect turn on all assesorys lights radio blower start car leave run for 5 min shut off for 5 min idle is controled by the computer the load
brings the idle up. Should be ok if not you may have to ajust the idle screw a little and then do this all over

Feb 01, 2011 | Ford Taurus Cars & Trucks

2 Answers

When I slow down to a complete stop, my 1999 chrysler sebring cuts off. Can you help me?


Possibly a transmission issue. The transmission has a "lockup" mode, where a clutch connects the engine directly to the transmission at cruising speeds. It is then supposed to unlock at lower speeds and for stopping. If it doesn't unlock, the car will stall at a stop. Try putting it into neutral (carefullly, so you don't go into reverse) as you slow down, if it doesn't stall out, it is most likely the transmission lockup mechanism.

If it stalls in neutral it is an engine issue. Bad idle control, bad ignition (it's easier to fire at high speed), bad fuel injector, bad air flow/pressure sensor... and more possibilities.

Feb 02, 2010 | 1999 Chrysler Sebring

1 Answer

94 eldorado stalls


First impression is a MAP sensor. If you take the car to a service station or an auto parts store that features free diagnostic tests, I'm sure the MAP sensor fault will appear. Other cause could be the TPS which controls the idle at cold,warm, and AC operation settings. It's possible that you're stalling due to insufficient idle speed setting on the TPS.

Jun 30, 2009 | 1994 Cadillac Eldorado

2 Answers

Low idle stalls out


Here is the most common cause of surges and stalls at stops and low erratic idle speed and rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Mar 13, 2009 | 1989 Audi 200

1 Answer

Truck dies when i stop or slow down


Here is the most common cause of surges and stalls and low idle rough idle, it is the idle speed control air-bypass valve and throttle valve (IAC for short), they get full of gunk over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

Feb 17, 2009 | 2003 Dodge Durango

Not finding what you are looking for?
1996 Ford Explorer Logo

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...