Question about 2000 Mazda Protege

1 Answer

2000 mazda protege making a squeeling sound when down shifting

I recently had the clutch kit replaced as well as spark plugs and fuel injectors about a month ago. but as of lately my car squeels when down shifting from 3rd to 2nd at about 35 mph. not a long squeel but a short one. i dont know if the transmission fluid was changed when the mechanic change the clutch and i have no idea where it is at either.

does anyone have any suggestions to my problems?????? i would really appreciate it than ku

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 154 Answers

Check to see if your alternator belt is loose

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 Mazda Protege dies while driving down the highway and will not start.


check fuel pressur, filter and fuel pump...sounds like it isnt getting fuel

Sep 23, 2012 | 1997 Mazda Protege

1 Answer

2000 mazda protege 1.6L my spark plugs are getting soaked with gas


bad fuel injectors. bad spark plugs - inspect and or replace -- bad spark plug wires - test ohms resistance of the spark plug wires with a multi meter (5 bucks at harbor freight) -- or simply replace the spark plug wires.
How was it you tested the coil and spark at the plugs?

I'd lean more towads faulty fuel injection, if you go to repai this, please be sure to add a quality fuel tank cleaner like lucas (the larger the bottle the less the cost per ounce - and works VERY well), You may also want to be sure to replace the fuel filter...
Best regards
Ck

Jul 17, 2012 | 2000 Mazda Protege

1 Answer

My 2000 Protege is a manual shift. Just recently, when I'm in 1st gear and I let the clutch out, the car awkwardly hops forwardly. I quickly shift into 2nd and that gear is fine. Why is my car doing this...


Sound like first gear is going out on you. It could also be an issue with the clutch. If the car has enough power try to take off in second gear and see if it hopes. If it doesn't there's likely a problem with first. Unless you are a certified auto mechanic, it's probably best to bring it in and have them conferm that it is a problem with the gear and have them take care of it. It might mean replacing the transmission.

Oct 15, 2010 | 2000 Mazda Protege

1 Answer

Replacing sparkplugs and wires on 2000 Mazda Protege 1.6 lt engine On top of cylinder 2 and ? are electrical components that attach to plugs. What are they? trying to find diagram and assistance for...


They are the ignition coils, the spark plugs are under them. When you have them off before pulling the spark plugs make sure the holes the plugs are in do not have oil in them, if so you will need new coil boots, plugwires and a valve cover gasket as well.

Mar 19, 2010 | 2000 Mazda Protege

1 Answer

Number tree injector not fireing in a mazda 323f


you mean the #3 fuel injector? start by checking the wire harness that plugs into it. sounds like an internal break in one of the wires. most fuel injectors have power going to them and the pcm grounds each of them individually to make them "fire" the gas charge. it is also possible that the injector is plugged up with debris and you will need to replace the injector. you should have a misfire code for #3 cylinder if you ran a scan with an OBDII error code reader.

Oct 29, 2009 | 1993 Mazda Protege

1 Answer

My mazda protege died in middle of driving. i changed the fuel pump, it drove properly for less than an hour. then it started loosing power where it would go up and down in speed. over the course of 3...


Probably your spark plug get wet (water get into your spark plug), so it doesn't work quite well to give high voltage spark to burn fuel.
Clean your spark plug by removing spark plugs of 4 cylinders and clean, start engine to blow out the residue water in spark plug socket. And install spark plug into 4 cylinders

Aug 19, 2009 | 2000 Mazda Protege

1 Answer

How do i plug in the spark plug coils? what order?


If it's the four cyl., the first coil pack bolts over the #2 spark plug. The #2 coil pack wire plugs into #3 spark plug. The number two coil pack bolts directly over the number four spark plug, and the #2 coil pack wire plugs into the #4 plug. The firing order is 1-4-2-3.

Jun 30, 2009 | 2000 Mazda Protege

1 Answer

1995 mazda protege having problems running during aceleration


change the transmission fluid, replace the oil and oil filter check spark plug cables, check starter coilpak, and make sure there is coolant

Jul 02, 2008 | 1995 Mazda Protege

Not finding what you are looking for?
2000 Mazda Protege Logo

Related Topics:

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...