Chana star bakkie pcv blocked

http://www.globalchangan.com/

I think you should try this website reliable-store . It helps you repair your vehicle easily without more help. Ask the girl in chat at the bottom of t he page

set the cam and crank to a point where you can make reference marks with a white pen,just a dot on pulleys and same on engine.change belt and make sure your marks line up and job is done.

I think you should buy repair manual first for your vehicle after that it will be easy for you to solve the problem. Check the link may be you will find something useful here Best Manuals

Where can i downlaid a workshop manual for a Chana Star ...

www.fixya.com/cars/t20864169-downlaid_workshop_manual_chana

Oct 21, 2013 - where can i downlaid a workshop manual for a Chana Star 1.3 ... As with any manual transmission, light or heavy duty, popping out of gear ... Where do I find the gearbox oil filler plug on Chana Star 1.3 panelvan ... Hi, my Chana Star 1000cc has problems with idle, normally it idles ... Manuals & User Guides.

#Tags chana auto repair manual

Sounds like a cracked head or bad head gasket. Have it checked by a mechanic.

The PCV valve allows crankcase pressure to be vented back into the intake. If it gets plugged, crankcase pressure builds up and has nowhere to go. Oil is going to try and escape any where it can, gaskets are the first place to let oil past them. Another weird thing is the oil dipstick might push itself out.

The upper part of your engine is like a compressor. The lower part is similar, but not to the same degree because there is a lot of room in the lower part of the engine which keep the pressures much lower. Yes, a blocked PCV valve can cause excessive crankcase pressures to build up which can cause oil to leak out of oil seals which are worn and weak. In some cases it can even cause oil leaks on low mileage engines which have no means of venting the crank case pressures. I hope this has helped you. Usually I don't run into too many stopped up PCV valves, just restricted ones and ones which won't close when they are suppose to.Good luck

Time has come to retire this vehicle to the recycle plant and get yourself a nice new SMALL car thats fuel efficient.Most obvious cause is worn pistons and rings