Question about Chevrolet Cobalt

1 Answer

2008 cobalt coupe interior

2008 cobalt coupe with manual transmission -- does anyone know why the center armrest / console fits only automatic models? the center console looks identical in both but the dealer lists the part as fitting the automatic transmission model only: will it fit a manual model or not? and if not, why not? thanks just dont want to waste the $90 to find out the hard way.....

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 42 Answers

Looks can be decieving ... more than likely it is due to the shift linkage and the underside of the center console. remember it is all molded plastic so they can have the top look identical and the bottom (or underside) could be completely different.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where can I buy light for Chevy cobalt gear shift console


Most console bulbs are 194. Napa or any parts store.

Apr 14, 2015 | 2008 Chevrolet Cobalt

1 Answer

2006 Chevy Cobalt LS won't start


Could be a weak connection between the battery and starter, or the clutch safety switch. You would need to know how far power is getting in the starter circuit to figure it out.

Feb 06, 2014 | Cars & Trucks

1 Answer

How do you disassemble the counsil?


Front Floor Console Replacement Removal Procedure
1. Remove the console trim plate. 2. Remove the left console trim panel. . 3. Remove the right console trim panel. 4. Remove the floor console compartment.
1356712.gif
5. If equipped with an automatic transmission, remove the 4?screws?(1), attaching the console?(2) to the shifter assembly?(3).
1356713.gif
6. If equipped with a manual transmission, use a flat-bladed tool to disengage the retaining tabs?(1) attaching the manual transmission shifter boot assembly?(2) to the console. 7. Remove the manual transmission gear shifter knob, if necessary. 8. Remove the manual transmission shifter boot assembly?(2) from the shifter, if equipped.
1356714.gif
9. Disconnect the console wiring connector?(1) from the inner console.
1356717.gif
10. Remove the two nuts?(1) attaching the floor console?(3) to the vehicle floor. 11. Remove the two screws?(2) attaching the front of the console to the instrument panel assembly. 12. Remove the accessory power receptacle. 13. Lift the rear of the console upward and remove from the vehicle. 14. Remove the floor console armrest hinge, if necessary. 15. Remove the center console end panel.
1356777.gif
16. Remove the screw?(2) attaching the floor console rear air duct?(3) to the floor console?(1). 17. Remove the floor console rear duct?(3) from the floor console?(1). 18. Remove the console storage bin, if necessary. 19. Remove the console lamp. 20. Remove the console compartment lamp switch.

Oct 06, 2011 | 2005 Pontiac GTO

1 Answer

Howto change a key cylinder for a chevy cobalt


There is a TSB on this issues if your having ignition lock issues.
Service Information
2009 Chevrolet Cobalt | Cobalt, G5 (VIN A) Service Manual | View All Bulletins | Document ID: 2325129

#09-02-35-005: Ignition Key Difficult to Remove, Ignition Key Binds or Sticks in Cylinder (Replace Ignition Cylinder) - (Aug 10, 2009)

Subject: Ignition Key Difficult to Remove, Ignition Key Binds or Sticks in Cylinder (Replace Ignition Cylinder)

Models: 2008-2009 Cadillac CTS (Built Prior to VIN Breakpoint 90163371)

2005-2009 Chevrolet Cobalt (Built Prior to April 14, 2009)

2006-2009 Chevrolet HHR (Built Prior to April 14, 2009)

2007-2009 Chevrolet Equinox (Built Prior to July 2008)

2005-2006 Pontiac Pursuit (Canada Only)

2006-2009 Pontiac Solstice (Built Prior to April 14, 2009)

2007-2009 Pontiac G5 (Built Prior to April 14, 2009), Torrent (Built Prior to July 2008)

Attention: This bulletin only applies to vehicle equipped with automatic transmission.

Aug 05, 2010 | 2005 Chevrolet Cobalt

3 Answers

Where do you fill the automatic transmission?


If you have a tranny dipstick, then you would need a long tranny type funnel and fill there.
If you do not have a dip stick, then you would have to raise the vehicle, and look at the tranny. There will be a higher and a lower plug on it. Remove the higher plug and stick your finger in the hole. If you feel fluid, then it is full.

Aug 02, 2009 | 2007 Chevrolet Cobalt Coupe

1 Answer

05 Highlander


If you look at the armrest side that is "away" from where it is attached to the seat, you will see a small circular cover. Using a small flat screwdriver, pry this cover off; it is held in by 2 small claws. When the cover is removed, it will expose the bolt that you need to remove to remove the armrest. Hint: tape the end of the scrwdriver so you do not deform the plastic cover or the part that the cover fits into. Quite an easy proceedure.

Oct 02, 2008 | 2005 Toyota Highlander

1 Answer

Broken driver side mirror


You can buy replacement stick on mirrors at most auto stores... different sizes or you actually cut it to the size you want.... cut out a peice of cardboard to make a template till it fits right on the mirror on the car and use that to get the replacement mirror you need or cut the replacement mirror to size.... peel off the paper on the back... then line up the mirror and push firmly starting in the center of the mirror working outward to make sure the sticky side sticks.

Robert

Sep 23, 2008 | 2008 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...