Question about 2003 GMC Envoy
If it sounds like it wants to but doesnt, like you can hear the motor but it is locked up, here is a way to fix it.look at seat and see if it looks sort of cocked and you may have to straighten the seat by keeping rod in one side or other and spinning it until seat is straight. there are 2 flexy cables that run side to side and cause the seat to move. they usually have a black plastic coating on them.remove them both. with both off hit switch and see if you hear the motors.If so you should lubricate tracks with silicone spray or spray grease.put cables back into holes and it should work.the cable may give you a lil trouble coming out but just pull back and forth they wont break
Posted on Jun 20, 2009
Had same problem with 2005
the plastic moulded cover around the control on side of the seat was loose and inhibited the switch movement. Tightened the screws holding panel in place and switch reumed resumed to normal operation
Posted on Aug 07, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 02, 2015 | 2003 GMC Envoy
Aug 03, 2015 | 2003 GMC Envoy
Sep 12, 2014 | 2003 GMC Envoy
Jan 23, 2013 | 2003 GMC Envoy
Jun 30, 2009 | 2002 GMC Envoy
Mar 19, 2009 | 2003 GMC Envoy
Feb 19, 2017 | 2003 GMC Envoy
1,329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: