Question about Dodge Challenger

2 Answers

2009 dodge challenger. have had car for one week . no problems until now. neither key fob will work. has push button start. fobs will not lock or unlock doors or trunk. tried popping starter button out and inserting key but still nothing.

Posted by on

  • dch2 Jun 20, 2009

    I was just wondering if something simple. Vehicle under warranty and Dealer will come get on Monday. I was thinking maybe something we did. Seems tansmitters not communicating with vehicle.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 122 Answers

It sounds as though your your vehicles code got scrambled. I doubt it was anything you did, its odd that it would simply quit working so suddenly. I know of no way to re-sync the Fobs to the car, that will likely have to be done By the dealer. Since you said he's coming to get it Monday, I'd just wait and see.

Posted on Jun 21, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

You need to check the sensor, that is under the dash.
Followup the below link for more info. -
http://blogs.edmunds.com/roadtests/2009/04/2009-dodge-challenger-rt-where-does-the-key-go.html

Thanks

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both my keys FOBs on my 2000 Dodge Grand Caravan don't work, changed the batteries, still did not work. Bought 2 new ones and the dealer could not program them.


Programming a Replacement Keyless Entry Remote ' Filear ...

filear.com/?p=131
Oct 17, 2012 - If the transmitters don't work, or if you'd rather not match the transmitters yourself, .... Tried these instructions last night on my 2005 Grand Prix.

Key FOB Not Working - The Chrysler Minivan Fan Club Forums

forum.chryslerminivan.net/showthread.../11859-Key-FOB-Not-Working

Mar 15, 2009 - 10 posts - ‎3 authors
Hi Everyone, One of my Key FOB's stopped working. Is there a way of ... Well, to be honest, you don't know where that FOB has been? LOL ... 2009 Dodge Grand CaravanSXT (3.8L), Light Sandstone Metallic, 125K miles 2005 Volvo .... By jimmy154 in forum 3rd Generation Chrysler Minivans: 1996-2000.

Key May Not Start Car or Release From Ignition : Dodge ...

repairpal.com > Problems > Dodge > Grand Caravan
Dodge Grand Caravan Key May Not Start Car or Release From Ignition. ... If the newkey doesn't work, replacing the lock cylinder including tumblers ... I am able to turn off the van, but the key is stuck in the ACC position, draining my battery. ... In reading other comments, I see it may be the FOB so I'll carry both with me and ...

2009 Dodge Grand Caravan car lock doors not working


Jan 24, 2016 | 2000 Dodge Grand Caravan

1 Answer

2009 dodge charger hard start, if I wiggle the key fob, or turn it over it will eventually start.


Then the key lock may be the cause:
  1. Ignition Lock Problems‎

    Adwww.about.com/Ignition+Lock+Problemsrating for about.com
    Ignition Lock Problems Search Now! Over 85 Million Visitors.
    100+ Topics · Expert Advice · Trending News · Trusted Guide
    About.com has 529,559 followers on Google+

Jul 22, 2015 | 2009 Dodge Charger SE

1 Answer

Is it a fuse that needs changing on an 08 nitro as fob and inside door locks not working


Your in good company! I googled this: 2009 Dodge Nitro key Fob not working unable to lock car
Large number of similar complaints. May be a recall or maybe should be. There may be a good solution somewhere it this search. Good luck.

Mar 12, 2015 | 2009 Dodge Nitro

3 Answers

New Dodge Journey 2011 Where would the key enclosed in keyfob fit to start the vehicle if remote not working?


I just changed the battery in my fob for 2011 Journey Crew, with the battery removed ( from fob ) I did start my car by pushing the start button whith my fob... so the theory is tested and true.... also the battery you'll need is CR2032 available everywhere... and removing the battery will NOT remove the programming of your fob ( also tested )... so no need to visit the "steelership" Hope this helps....

Apr 03, 2011 | 2011 Dodge Journey

1 Answer

Fob on 2009 Dodge Challanger does not always work. Have had it quit on me a couple of times at a movie theatre. Is there some kind of signal that can disrupt the fob? Also is it a possiblilty to get it...


do you not have a key hole on the drivers side .use your key to open and the alarm should shut off .there is a switch on the back of the key cylinder in order to shut the alarm off. in the fob does it have a key that's pops out to use as old style.

Jan 25, 2011 | 2009 Dodge Challenger

1 Answer

Remote control has stopped working. Have tried changing the battery of the remote control but that did not work.


Does the red light on the remote light up when you push any of the button
if no, replace remote
if yes, then try repograming the remote to the car again.
-Have remotes' ready. if you have two then fob#1 and fob#2 (doesn't matter which one is #1 or #2)
-each step has to be done within 5 sec or it will not work, but don't do it super fast.
1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release
2.turn key off
3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
4.turn key off
5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
6turn key off
7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 8)and push the "lock button" on fob#2 twice.
8.turn key off and remove key from ignition.
if you did it right, remotes' should work again.
good luck

Dec 17, 2010 | 2003 Honda Accord

2 Answers

Both key fobs for honda pilot 2006 no longer works. Do I need new keys or is it something internal such as a fuse?


First thing, does the red light on the remote light up when you push any of the button
if no, then replace battery inside remote
if yes, then try repograming the remote to the car again.
-Have both remote ready. fob#1 and fob#2 (doesn't matter which one is #1 or #2)
-each step has to be done within 5 sec or it will not work, but don't do it super fast.
1.turn key just to the "on" position (not starting) and push "lock button " on fob#1 once and release
2.turn key off
3.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
4.turn key off
5.turn key just to the "on" position (not starting)and push "lock button " on fob#1 once and release
6turn key off
7.turn key just to the "on" position (not starting) and push "lock button " on fob#1 twice (if you only have one fob, then stop here and go to step 7)and push the "lock button" on fob#2 twice.
8.turn key off and remove key from ignition.
if you did it right, remotes should work again.
good luck

Dec 17, 2010 | Honda Pilot Cars & Trucks

1 Answer

Resetting a Key fob on 2007 Honda Pilot


to program a key fob- get in vehicle and close all doors. insert key into ignition, have all the key fobs you want to program for this vehicle in hand, programing erases all old fobs. turn the ignition switch to on(all dash lights light up, on click before starting the car). then hit the lock button on one of the fobs. turn the ignition to lock. turn the ignition back to run and press the lock button again from the same remote. repeat untill all the locks cycle. ones the locks cycle keep the ignition in run and press the lock button on each key fob(the ocks will cycle each time a button is pressed). then turn the ignition to lock after all fobs have been programed

Dec 31, 2009 | 2009 Honda Pilot

1 Answer

My key fob doesn't always seem to wanna work with my keyless go. It will display the message "key fob not detected" at times I will place it right by the button, or on the dash. It comes and goes it seems....


Its the WCM wireless control module. Take it back to the dealer its under warrenty have them fix it. They have had many problems with the WCM. May even have a TSB on it.

Nov 09, 2009 | 2009 Dodge Challenger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...